Keine Netwerkverbindung zu Access Point D-Link AP2000+

[Marie Huana]

Hallo Leute,

habe ein kleines (vielleicht auch größeres) Problem und dachte mir, ich wende mich an Profis! Habe mir den D-Link AP 2000+ geholt. In meinem Linux PC habe ich eine Netzwerkkarte von D-Link drin. Wenn ich das Patchkabel nun an die Karte stecke, die Lan-Karte als 192.168.0.1 konfiguriere und den AP im Browser über "http://192.168.0.50" konfigurieren will, bekomm ich keine Verbindung. Auch ping funktioniert nicht. Muss ich die IP o.ä. vorher in der Firewall freigeben? Dann hab ich noch eine Frage zu einer Fehlermeldung der Linux Firewall? Und zwar steht da: Warning: Detected activated Samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external.
iptables v1.2.8: invalid tcp port/service "80,110" specified. Was muss ich tun damit der Fehler weg ist? Wo finde ich die Bootlog? Würde gern mal wissen ob da beim booten Fehler auftauchen!... Und noch die letzte Frage: Habe 3 Netzwerkkarten im PC, könnte das Probleme geben? 2 netzwerkkarten on board, wobei eine nicht läuft weil es keine Treiber gibt, und die D-Link Karte. Habe SuSE Linux 9.1 Danke für eure Hilfe

Marie

 

[genron]

hi marie,

bin zwar kein SuSE-geek eher gentoo und debian aber weil hier keiner schreibt mach ich das mal

also zu frage1: nein, in der firewall des APs musst du denke ich nichts ändern , da dein rechner und der AP eh im gleichen subet 192.168.0.x (192.168/24) sind.

wenn AP und NIC des rechners eine ip aus diesem subnet haben müsstes du den AP erreichen - vl hast du ja im rechner eine firewall die genau diesen traffix blockt.

Dann hab ich noch eine Frage zu einer Fehlermeldung der Linux Firewall? Und zwar steht da: Warning: Detected activated Samba, enabling FW_SERVICE_SMB! You still have to allow tcp port 139 on internal, dmz and/or external.

das bedeutet, dass du in der allow liste für ports der lokalen linux firewall noch den port 139/tcp (eigentlich auch noch 135-139/udp und 135-138/tcp und 445/tcp) eintragen musst, damit man vom lan oder einem anderen netzwerk mittels routing auf deinen samba dienst zugreufen kann.

iptables v1.2.8: invalid tcp port/service "80,110" specified. Was muss ich tun damit der Fehler weg ist?

80,110 da muss vl. ein komma rein, damit der das als 80 und 110 erkennt und es iptables übergibt.

o finde ich die Bootlog?

wenn ich mich an suse erinnern kann unter /var/log/boot.msg oder einfach /var/log/messages durchsuchen (greppen)

Und noch die letzte Frage: Habe 3 Netzwerkkarten im PC, könnte das Probleme geben? 2 netzwerkkarten on board, wobei eine nicht läuft weil es keine Treiber gibt, und die D-Link Karte.

nein, du kannst soviele NICs in deinem rechner haben wie du willst. es könnte ja auch ein router sein der zw. mehereren netzen über diese nics routet.

noch ein tipp: wenn die eine zufällig eine nvidia nic ist dafür gibt es treiber muss man wohl nur selber übersetzen ... hab noch kaum eine bzw keine nic gesehen für die es keine treiber gibt

ok ich hoffe ich konnte helfen

bye bye und ciaooii
Ronny

 

[Marie Huana]

Hallo!
Danke für deine Antwort!
Leider hab ich noch überhaupt keinen Plan von Linux.
Habe jetzt die ganzen Ports so eingegeben, wie du sie mir hingeschrieben hast, also im Kontrollzentrum unter YAST2 Modeule -> Sicherheit und Benutzer -> Firewall . Dort habe ich unter zusätzliche Dienste folgendes eingegeben: 135:138/tcp 135:139/udp 139/tcp 445/tcp

wenn ich jetzt SuSEfirewall2 stop und dann wieder start eingebe, kommt die Fehlermeldung: "iptables v1.2.8: invalid tcp port/service xxx specified." Alson anstatt dem xxx für jeden eingegeben port der Fehler. Wo muss ich denn die Ports eingeben? Ich blick da nicht so ganz durch

Wegen dem AP... Hat der denn überhaupt eine Firewall? Ich meinte die von Linux... Wie muss ich die konfigurieren um den AP zumindest mal anpingen zu können? Ich dachte mir ich tu mal die boot log posten, vielleicht gibt es da irgendwelche Fehler! Danke
Inspecting /boot/System.map-2.4.21-99-athlon
Loaded 21422 symbols from /boot/System.map-2.4.21-99-athlon.
Symbols match kernel version 2.4.21.
Loaded 73 symbols from 4 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-99-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Wed Sep 24 13:34:32 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
<4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>757MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 65520
<4>zone(0): 4096 pages.
<4>zone(1): 61424 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 Nvidia ) @ 0x000f6d60
<6>ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x0fff3000
<6>ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x0fff3040
<6>ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x0fff74c0
<6>ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
<5>ACPI: Skipping APIC setup
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hdb1 vga=0x31a desktop splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 944.997 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 1863.68 BogoMIPS
<6>Memory: 255176k/262080k available (1739k kernel code, 6516k reserved, 605k data, 176k init, 0k highmem)
<6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
<7>CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
<4>CPU: AMD Athlon(tm) stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=3
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [APC1] (IRQs *16)
<4>ACPI: PCI Interrupt Link [APC2] (IRQs *17)
<4>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
<4>ACPI: PCI Interrupt Link [APC4] (IRQs 19)
<4>ACPI: PCI Interrupt Link [APC5] (IRQs 16)
<4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
<4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
<4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
<7>00:00:01[A] -> IRQ 11 Mode 1 Trigger 1
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
<7>00:00:02 -> IRQ 5 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
<7>PIC: IRQ (5) already programmed
<4>ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
<7>PIC: IRQ (5) already programmed
<4>ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
<7>00:00:06 -> IRQ 10 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
<7>PIC: IRQ (5) already programmed
<4>ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LIDE] enabled at IRQ 10
<7>PIC: IRQ (10) already programmed
<4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
<7>PIC: IRQ (5) already programmed
<4>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
<7>PIC: IRQ (10) already programmed
<4>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>PISCH: Plug In Scheduler Interface (Version 6)
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 16380
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe8000000, mapped to 0xd0818000, size 16384k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
<6>vesafb: protected mode interface info at c000:7e6b
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3).
<6>bootsplash: silent jpeg found.
<6>bootsplash: silent jpeg found.
<4>Console: switching to colour frame buffer device 148x51
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE2: IDE controller at PCI slot 00:09.0
<6>NFORCE2: chipset revision 162
<6>NFORCE2: not 100%% native mode: will probe irqs later
<4>AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
<6>SiI3112 Serial ATA: IDE controller at PCI slot 01:0b.0
<6>SiI3112 Serial ATA: chipset revision 2
<6>SiI3112 Serial ATA: not 100%% native mode: will probe irqs later
<6> ide2: MMIO-DMA , BIOS settings: hdeio, hdfio
<6> ide3: MMIO-DMA , BIOS settings: hdgio, hdhio
<4>hdb: C/H/S=0/0/0 from BIOS ignored
<4>hda: COMPAQ DVD-ROM DRD-8120B, ATAPI CD/DVD-ROM drive
<4>hdb: Maxtor 34098H4, ATA DISK drive
<4>blk: queue c03eb81c, I/O limit 4095Mb (mask 0xffffffff)
<4>hde: no response (status = 0xfe)
<4>hdg: no response (status = 0xfe)
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdb: attached ide-disk driver.
<4>hdb: host protected area => 1
<6>hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
<6>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hdb: [PTBL] [4865/255/63] hdb1 hdb2
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 300k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>Guestimating sector 78164335 for superblock
<7>driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device ide0(3,65)) ...
<4>for (ide0(3,65))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 176k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>reiserfs: enabling write barrier flush mode
<6>device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<6>Adding Swap: 2369576k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Thu Aug 4 18:40:15 2005

<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.md boot.device-mapper)
Run file system check on root for device mapper setup
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x341 of format 3.6 with standard journal
Blocks (total/free): 9177123/8015574 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneRemounting root file system (/) read/write...
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
Remounting root file system (/) read-only again...
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.lvm)
Run file system check on root for LVM activation
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x341 of format 3.6 with standard journal
Blocks (total/free): 9177123/8015574 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group

Activating LVM volume groups...
vgchange -- no volume groups found

done
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x341 of format 3.6 with standard journal
Blocks (total/free): 9177123/8015574 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneActivating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
Restore device permissionsdone
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.quota)
<notice>exit status of (boot.quota) is (0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Enabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(29,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
<notice>killproc: kill(29,3)


Boot logging started on /dev/tty1(/dev/console) at Thu Aug 4 18:40:27 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn)
Initializing random number generatordone
Setting up ISDN card contr0 AVM FRITZ!Card PCIdone
Loading Driver contr0 1 kcapi capi capidrvdone
Initializing capi for contr0 (1)done
<notice>exit status of (random isdn) is (0 0)
<notice>start services (network)
Setting up network interfaces:
lo done
eth0 IP/Netmask: 192.168.0.1 / 255.255.255.0 done
ippp0 <notice>pidofproc: ifup-ippp 903
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console SHELL=/bin/sh TERM=linux progress=18 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 SHLVL=4 HOME=/ sscripts=44 splash=silent _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .. ]done
<notice>exit status of (hotplug) is (0)
<notice>start services (resmgr)
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>exit status of (resmgr) is (0)
<notice>start services (splash_early portmap nmb)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting Samba classic NMB daemon <notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ]
done
<notice>exit status of (splash_early portmap nmb) is (0 0 0)
<notice>start services (smbfs)
Mount SMB File System unused
<notice>exit status of (smbfs) is (6)
<notice>start services (sshd named fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules (ac battery button fan processor thermal ) done
Starting acpid done
<notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/named ]
Starting name server BIND 9 done
Starting sound driver: intel8x0done
Restoring the previous sound settingdone
<notice>exit status of (sshd named fbset alsasound acpid) is (0 0 0 0 0)
<notice>start services (splash kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (B
done<notice>exit status of (splash kbd cups) is (0 0 0)
<notice>start services (xinetd smpppd smb postfix hwscan)
Starting SMPPPDdone
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Starting INET services. (xinetd)done
Starting mail service (Postfix)done
Samba SMB: Waiting for cupsd to get ready(29s) (28s) (27s) (26s) done
Starting Samba classic SMB daemon <notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ]
done
<notice>exit status of (xinetd smpppd smb postfix hwscan) is (0 0 0 0 0)
<notice>start services (xdm)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=39 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE@euro splash=silent sscripts=44 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm) is (0)
<notice>start services (apache2)
Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh get_module_list_done=true progress=40 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 get_includes_done=true PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
done
<notice>exit status of (apache2) is (0)
<notice>start services (nscd cron capisuite)
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting CapiSuite unused
<notice>exit status of (nscd cron capisuite) is (0 0 6)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs capisuite
<notice>killproc: kill(712,3)

 

[genron]

hallo

ja es ist leider schwer dir zu helfen wenn du noch nicht viel ahnung von Linux und vorallem IP-Netzwerken generell hast.

was die ports betrifft so wird es sicher daran liegen dass du nicht zb 139/tcp eingeben musst sondern nur die portnummer (139) und das protokoll (tcp) sicher irgendwo anklicken kannst bei yast.
dann wird yast oder iptables sicher auch nicht meckern. vl. kannst du ja in hilfe zu yast nachlesen.

ich habe leider keine suse mehr es ist mir eh zu undurchsichtig.

was die firewall angeht - wenn es nur ein AP ist könnte er eine firewall funktion haben oder auch nicht. es kann aber auch sein dass deine linux firewall eben diesen traffic (pakete) nicht durchlässt.
wenn nichtdruchgelassene pakete geloggt werden(was ich anehmen standardmäßig bei suse) dann mach mal

tail -f /var/log/messages

als user root und dann pinge den AP und versuche und in dem terminal wo du dieses logfile messages beobachstest (tail -f ...) zu schauen ob dort der kernel pakete an den AP oder vom AP verwirft oder zurückweist.

es sieht meist so oder so ähnlich aus:

Aug  7 12:37:17 sonne Shorewall:loc2fw:REJECT:IN=eth0 OUT= MAC=00:e0:7d:ae:93:57:00:e0:7d:c6:bf:9b:08:00 SRC=192.168.1.5 DST=192.168.1.1 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=59862 DF PROTO=TCP SPT=49241 DPT=44 WINDOW=5840 RES=0x00 SYN URGP=0

viel glück
ro.