Ich habe mit meiner Vivanco- WLAN Karte (PCMCIA), seit opensuse 11.2 das Problem, daß die bisher verwendete Firmware nicht mehr funktioniert hat. Ich habe mir zwar dann die neueste Firmware heruntergeladen, unter 11.2 ließ sich die Karte aber auch weiterhin nicht einrichten und es erschien ständig die Meldung, daß die Firmware fehlen würde. Heute habe ich die neue Version von opensuse, 11.3 installiert und siehe da, nach dem Kopieren der Firmware in den Ordner "Firmware", ließ sich die Karte wieder problemlos einrichten. Allerdings wird sie in den Netzwerkeinstellungen immer als "nicht verbunden" angezeigt. Die LED´s "Act." und "Link" bleiben aus, es wird aber trotzdem mein Drahtlosnetzwerk angezeigt. Versuche ich dann, eine Verbindung herzustellen, dauert es kurze Zeit und ich soll dann meinen WPA- Schlüssel eingeben. Nach einiger Zeit, erscheint dann wieder die Eingabeaufforderung für den Netzwerkschlüssel, eine Verbindung kommt letztendlich nicht zu Stande. Dann steht in den Netzwerkeinstellungen auch immer noch ein "Unbekanntes Gerät", welches noch nicht konfiguriert ist. :???:
-
Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.
Keine WLAN- Verbindung ISL3886? [gelöst]
- Ersteller Strietzl
- Erstellt am
lies dir das hier doch bitte mal durch und führe dann das Script aus und poste die Ausgabe
Was Jägerschlürfer genau meint ist: http://www.linux-club.de/viewtopic.php?f=19&t=93338 
mist, hab ich doch glatt vergessen, den Link zu posten. Danke für die Aufmerksamkeit, tomm.fa
OP
Das hier wird nach dem Auführen des Scripts ausgegeben:
Code:
collectNWData.sh V0.6.3.8-6 (Rev: 1.237, Build: 2010/07/17 08:26:47 UTC)
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgefuehrt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1
--- NWEliza untersucht das System nach haeufigen Netzwerkkonfigurationsfehlern ...
!!! CND0230W: IPV6 ist eingeschaltet
!!! CND0240E: Knetworkmanager wird fuer die Netzwerkkonfiguration benutzt aber eine YAST Netzwerkkartenkonfiguration fuer wlan0,eth0 existiert
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden koennen.
==================================================================================================================
==================================================================================================================
*** uname -a
Linux linux-ulaa 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
==================================================================================================================
*** cat /etc/*[-_]release || cat /etc/*[-_]version
/etc/SuSE-release
openSUSE 11.3 (i586)
VERSION = 11.3
==================================================================================================================
*** cat /etc/resolv | grep -i "nameserver"
==================================================================================================================
*** cat /etc/hosts
127.0.0.1 localhost
127.0.0.2 linux-ulaa.site linux-ulaa
==================================================================================================================
*** route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
==================================================================================================================
*** ifconfig
eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
inet6 Adresse: fe80::203:dff:fe1c:a4c4/64 Gültigkeitsbereich:Verbindung
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:6654 errors:0 dropped:0 overruns:0 frame:0
TX packets:6260 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:6538652 (6.2 Mb) TX bytes:816015 (796.8 Kb)
Interrupt:19 Basisadresse:0xd800
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:152 errors:0 dropped:0 overruns:0 frame:0
TX packets:152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:10704 (10.4 Kb) TX bytes:10704 (10.4 Kb)
==================================================================================================================
*** ping tests
connect: Network is unreachable
Ping of 195.135.220.3 failed
ping: unknown host www.suse.de
Ping of www.suse.de failed
==================================================================================================================
*** dhcpcd-test
==================================================================================================================
*** lspci
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
02:00.0 Network controller [0280]: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] [1260:3886] (rev 01)
==================================================================================================================
*** lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==================================================================================================================
*** hwinfo (filtered)
18: PCI 04.0: 0200 Ethernet controller
Model: "Silicon Integrated SiS900 PCI Fast Ethernet"
Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
Device: pci 0x0900 "SiS900 PCI Fast Ethernet"
SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
SubDevice: pci 0x106c
Driver: "sis900"
Driver Modules: "sis900"
Device File: eth0
Link detected: no
Driver Status: sis900 is active
Driver Activation Cmd: "modprobe sis900"
28: PCI 200.0: 0282 WLAN controller
Model: "Intersil ISL3886 [Prism Javelin/Prism Xbow]"
Vendor: pci 0x1260 "Intersil Corporation"
Device: pci 0x3886 "ISL3886 [Prism Javelin/Prism Xbow]"
SubVendor: pci 0x17cf "Z-Com, Inc."
SubDevice: pci 0x0035
Driver Status: prism54 is not active
Driver Activation Cmd: "modprobe prism54"
Driver Status: p54pci is not active
Driver Activation Cmd: "modprobe p54pci"
==================================================================================================================
*** lsmod # (filtered)
| ac | ac97_bus | af_packet | fscache | i2c_sis96x |
| ieee1394 | ip_tables | jbd2 | k8temp | mperf |
| ohci1394 | pci_hotplug | powernow_k8 | rsrc_nonstatic | serio_raw |
| sg | shpchp | sis900 | sr_mod | xt_limit |
| xt_NOTRACK | xt_pkttype | xt_state | yenta_socket |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]*
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='SiS900 PCI Fast Ethernet'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='hotplug'
USERCONTROL='no'
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='ISL3886 [Prism Javelin/Prism Xbow]'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='hotplug'
USERCONTROL='no'
WIRELESS_AP=''
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_CA_CERT=''
WIRELESS_CHANNEL=''
WIRELESS_CLIENT_CERT=''
WIRELESS_CLIENT_KEY=''
WIRELESS_CLIENT_KEY_PASSWORD=''
WIRELESS_DEFAULT_KEY='0'
WIRELESS_EAP_AUTH=''
WIRELESS_EAP_MODE=''
WIRELESS_ESSID='§§§§§§§§1'
WIRELESS_FREQUENCY=''
WIRELESS_KEY=''
WIRELESS_KEY_0=''
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='@@@@@@'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_PEAP_VERSION=''
WIRELESS_POWER='yes'
WIRELESS_WPA_ANONID=''
WIRELESS_WPA_IDENTITY=''
WIRELESS_WPA_PASSWORD=''
WIRELESS_WPA_PSK='@@@@@@'
==================================================================================================================
*** iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
==================================================================================================================
*** Actual date for bias of following greps
17:49:56 2010-07-17
==================================================================================================================
*** grep -i radio /var/log/messages* | tail -n 5
Jul 17 15:27:56 linux-ulaa kernel: [ 1869.260067] Registered led device: p54-phy1::radio
==================================================================================================================
*** dmesg | grep -i radio | tail -n 5
==================================================================================================================
*** tail -n 300 /var/log/messages* | /bin/grep -i firmware | tail -n 5
==================================================================================================================
*** ls /lib/firmware/*
| 2.6.34-12-desktop | 3CCFEM556.cis | 3CXEM556.cis | COMpad2.cis |
| COMpad4.cis | DP83903.cis | E-CARD.cis | isl3886pci |
| LA-PCM.cis | microcode.dat | MT5634ZLX.cis | NE2K.cis |
| PCMLM28.cis | PE-200.cis | PE520.cis | RS-COM-2P.cis |
| tamarack.cis |
==================================================================================================================
*** ndiswrapper -l
No ndiswrapper module loaded
==================================================================================================================
*** Active processes
wpa_supplicant:YES knetworkmanager:YES nm-applet:NO
==================================================================================================================
*** egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$"
NETWORKMANAGER="yes"
==================================================================================================================
*** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net*
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
==================================================================================================================
*** iwlist scanning
No WLANs found
==================================================================================================================
*** NWElizaStates V0.6.3.8-6
IF:eth0 IM:1 DI:1 AP:0 FALON:1 NI:1 cNI:1 NDIS:0 IP6:1 KM:1 WLW:0 RTDT:SuSENach einer Kurzübersicht.
Dort kann auch IPv6 deaktiviert werden.
Wenn du den (K)NetworkManager nutzen willst, dann: http://www.linupedia.org/opensuse/W...schen,_damit_der_NetworkManager_funktioniert?
Dort kann auch IPv6 deaktiviert werden.
OP
Also dmesg bringt mir das:
Von dem Script kommt dieses Ergebnis:
Und was ich gar nicht weiß, wie setze ich prism54 auf eine Balcklist?
Code:
dmesg
[ 0.000000] Linux version 2.6.34-12-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-06-29 02:39:08 +0200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable)
[ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fdf000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037fdf000 - 0000000038000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x37fd0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000037fd0000 (usable)
[ 0.000000] modified: 0000000037fd0000 - 0000000037fdf000 (ACPI data)
[ 0.000000] modified: 0000000037fdf000 - 0000000038000000 (ACPI NVS)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @ 15000-1f000
[ 0.000000] RAMDISK: 37600000 - 37fc0000
[ 0.000000] Allocated new RAMDISK: 00afd000 - 014bc8a1
[ 0.000000] Move RAMDISK from 0000000037600000 - 0000000037fbf8a0 to 00afd000 - 014bc8a0
[ 0.000000] ACPI: RSDP 000f7670 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 37fd0000 00030 (v01 A M I OEMRSDT 04000527 MSFT 00000097)
[ 0.000000] ACPI: FACP 37fd0200 00081 (v02 A M I OEMFACP 04000527 MSFT 00000097)
[ 0.000000] ACPI: DSDT 37fd03f0 03499 (v01 UW F11_____ 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 37fdf000 00040
[ 0.000000] ACPI: APIC 37fd0390 00054 (v01 A M I OEMAPIC 04000527 MSFT 00000097)
[ 0.000000] ACPI: OEMB 37fdf040 00109 (v01 A M I AMI_OEM 04000527 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 37fd0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000
[ 0.000000] node 0 pfn: [0 - 37fd0]
[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 37600
[ 0.000000] remove_active_range (0, 226816, 228864)
[ 0.000000] Reserving total of 800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36800 max_low_pfn ~ 371fe
[ 0.000000] max_pfn = 37fd0
[ 0.000000] 13MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] node 0 will remap to vaddr f6800000 - f7000000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6800000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6800000 to pfn 00037600
[ 0.000000] remap_numa_kva: f6a00000 to pfn 00037800
[ 0.000000] remap_numa_kva: f6c00000 to pfn 00037a00
[ 0.000000] remap_numa_kva: f6e00000 to pfn 00037c00
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x00037fd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037600
[ 0.000000] 0: 0x00037e00 -> 0x00037fd0
[ 0.000000] On node 0 totalpages: 227167
[ 0.000000] free_area_init_node: node 0, pgdat f6800000, node_mem_map f6802200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 28 pages used for memmap
[ 0.000000] HighMem zone: 1462 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 38000000 (gap: 38000000:c7f80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1600000 s34900 r0 d22444 u2097152
[ 0.000000] pcpu-alloc: s34900 r0 d22444 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225375
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HM160HC_S12TJD0S163947-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HM160HC_S12TJD0S163947-part1 splash=silent quiet vga=0x31d
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (44 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000af3f64] TEXT DATA BSS
[ 0.000000] #3 [0000af4000 - 0000afc14d] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f9d20] BIOS reserved
[ 0.000000] #7 [00000f9e28 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f9d20 - 00000f9e28] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 000001c000] PGTABLE
[ 0.000000] #12 [0000afd000 - 00014bd000] NEW RAMDISK
[ 0.000000] #13 [0037600000 - 0037e00000] KVA RAM
[ 0.000000] #14 [0036800000 - 0037000000] KVA PG
[ 0.000000] #15 [00014bd000 - 00014be000] BOOTMEM
[ 0.000000] #16 [00014be000 - 00014be004] BOOTMEM
[ 0.000000] #17 [00014be040 - 00014be100] BOOTMEM
[ 0.000000] #18 [00014be100 - 00014be1a4] BOOTMEM
[ 0.000000] #19 [00014be1c0 - 00014c11c0] BOOTMEM
[ 0.000000] #20 [00014c11c0 - 00014c11c4] BOOTMEM
[ 0.000000] #21 [00014c1200 - 00014c12c0] BOOTMEM
[ 0.000000] #22 [00014c12c0 - 00014c12ef] BOOTMEM
[ 0.000000] #23 [00014c1300 - 00014c1420] BOOTMEM
[ 0.000000] #24 [00014c1440 - 00014c1480] BOOTMEM
[ 0.000000] #25 [00014c1480 - 00014c14c0] BOOTMEM
[ 0.000000] #26 [00014c14c0 - 00014c1500] BOOTMEM
[ 0.000000] #27 [00014c1500 - 00014c1540] BOOTMEM
[ 0.000000] #28 [00014c1540 - 00014c1580] BOOTMEM
[ 0.000000] #29 [00014c1580 - 00014c15c0] BOOTMEM
[ 0.000000] #30 [00014c15c0 - 00014c1600] BOOTMEM
[ 0.000000] #31 [00014c1600 - 00014c1610] BOOTMEM
[ 0.000000] #32 [00014c1640 - 00014c16dc] BOOTMEM
[ 0.000000] #33 [00014c1700 - 00014c179c] BOOTMEM
[ 0.000000] #34 [0001600000 - 000160e000] BOOTMEM
[ 0.000000] #35 [00014c37c0 - 00014c37c4] BOOTMEM
[ 0.000000] #36 [00014c3800 - 00014c3804] BOOTMEM
[ 0.000000] #37 [00014c3840 - 00014c3844] BOOTMEM
[ 0.000000] #38 [00014c3880 - 00014c3884] BOOTMEM
[ 0.000000] #39 [00014c38c0 - 00014c3968] BOOTMEM
[ 0.000000] #40 [00014c3980 - 00014c39e8] BOOTMEM
[ 0.000000] #41 [00014c3a00 - 00014c7a00] BOOTMEM
[ 0.000000] #42 [00014c7a00 - 0001547a00] BOOTMEM
[ 0.000000] #43 [0001547a00 - 0001587a00] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000371fe:00037fd0)
[ 0.000000] Memory: 880376k/917312k available (4440k kernel code, 28292k reserved, 3278k data, 428k init, 5960k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc098a000 - 0xc09f5000 ( 428 kB)
[ 0.000000] .data : 0xc0656112 - 0xc0989ba8 (3278 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0656112 (4440 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:8448 nr_irqs:256
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.420 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.84 BogoMIPS (lpj=1596420)
[ 0.001078] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.001168] Security Framework initialized
[ 0.001201] AppArmor: AppArmor initialized
[ 0.001230] Mount-cache hash table entries: 512
[ 0.001402] mce: CPU supports 5 MCE banks
[ 0.001424] Performance Events: AMD PMU driver.
[ 0.001429] ... version: 0
[ 0.001431] ... bit width: 48
[ 0.001433] ... generic registers: 4
[ 0.001436] ... value mask: 0000ffffffffffff
[ 0.001438] ... max period: 00007fffffffffff
[ 0.001440] ... fixed-purpose events: 0
[ 0.001442] ... event mask: 000000000000000f
[ 0.001450] Checking 'hlt' instruction... OK.
[ 0.005466] SMP alternatives: switching to UP code
[ 0.010610] Freeing SMP alternatives: 20k freed
[ 0.010704] Unpacking initramfs...
[ 0.348327] Freeing initrd memory: 9984k freed
[ 0.360264] ACPI: Core revision 20100121
[ 0.368104] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.368204] Mapping cpu 0 to node 0
[ 0.368364] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.379049] CPU0: Mobile AMD Sempron(tm) Processor 2800+ stepping 02
[ 0.382126] Brought up 1 CPUs
[ 0.382130] Total of 1 processors activated (3192.84 BogoMIPS).
[ 0.383062] devtmpfs: initialized
[ 0.383421] regulator: core version 0.5
[ 0.383469] regulator: dummy:
[ 0.383489] Time: 17:59:28 Date: 07/17/10
[ 0.383558] NET: Registered protocol family 16
[ 0.383746] node 0 link 0: io port [1000, ffffff]
[ 0.383752] TOM: 0000000040000000 aka 1024M
[ 0.383757] node 0 link 0: mmio [a0000, bffff]
[ 0.383761] node 0 link 0: mmio [40000000, ffffffff]
[ 0.383766] bus: [00, ff] on node 0 link 0
[ 0.383771] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.383774] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.383778] bus: 00 index 2 [mem 0x40000000-0xfcffffffff]
[ 0.383793] ACPI: bus type pci registered
[ 0.384605] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.384608] PCI: Using configuration type 1 for base access
[ 0.386098] bio: create slab <bio-0> at 0
[ 0.387842] ACPI: EC: Look up EC in DSDT
[ 0.388731] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.393045] ACPI: Interpreter enabled
[ 0.393055] ACPI: (supports S0 S3 S4 S5)
[ 0.393085] ACPI: Using IOAPIC for interrupt routing
[ 0.394055] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.402756] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.402964] ACPI: No dock devices found.
[ 0.402970] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.403083] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.403296] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.403299] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.403304] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.403308] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.403312] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.403316] pci_root PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
[ 0.403321] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
[ 0.403349] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe1ffffff]
[ 0.403447] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.403478] pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f]
[ 0.403515] pci 0000:00:02.5: reg 20: [io 0xffa0-0xffaf]
[ 0.403546] pci 0000:00:02.6: reg 10: [io 0xe400-0xe4ff]
[ 0.403553] pci 0000:00:02.6: reg 14: [io 0xe000-0xe07f]
[ 0.403581] pci 0000:00:02.6: supports D1 D2
[ 0.403584] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.403589] pci 0000:00:02.6: PME# disabled
[ 0.403611] pci 0000:00:02.7: reg 10: [io 0xe800-0xe8ff]
[ 0.403617] pci 0000:00:02.7: reg 14: [io 0xec00-0xec7f]
[ 0.403645] pci 0000:00:02.7: supports D1 D2
[ 0.403648] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.403652] pci 0000:00:02.7: PME# disabled
[ 0.403674] pci 0000:00:03.0: reg 10: [mem 0xdfffd000-0xdfffdfff]
[ 0.403710] pci 0000:00:03.1: reg 10: [mem 0xdfffe000-0xdfffefff]
[ 0.403750] pci 0000:00:03.3: reg 10: [mem 0xdffff000-0xdfffffff]
[ 0.403778] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.403782] pci 0000:00:03.3: PME# disabled
[ 0.403808] pci 0000:00:04.0: reg 10: [io 0xd800-0xd8ff]
[ 0.403814] pci 0000:00:04.0: reg 14: [mem 0xdfffc000-0xdfffcfff]
[ 0.403831] pci 0000:00:04.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
[ 0.403845] pci 0000:00:04.0: supports D1 D2
[ 0.403848] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.403853] pci 0000:00:04.0: PME# disabled
[ 0.403877] pci 0000:00:06.0: reg 10: [mem 0xdfffb800-0xdfffbfff]
[ 0.403883] pci 0000:00:06.0: reg 14: [mem 0xdfff4000-0xdfff7fff]
[ 0.403911] pci 0000:00:06.0: supports D1 D2
[ 0.403914] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.403919] pci 0000:00:06.0: PME# disabled
[ 0.403944] pci 0000:00:09.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.403958] pci 0000:00:09.0: supports D1 D2
[ 0.403961] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.403966] pci 0000:00:09.0: PME# disabled
[ 0.403990] pci 0000:00:09.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.404010] pci 0000:00:09.1: supports D1 D2
[ 0.404013] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404017] pci 0000:00:09.1: PME# disabled
[ 0.404041] pci 0000:00:09.2: reg 10: [mem 0xdfffa000-0xdfffafff]
[ 0.404073] pci 0000:00:09.2: supports D1 D2
[ 0.404076] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404081] pci 0000:00:09.2: PME# disabled
[ 0.404169] PCI: peer root bus 00 res updated from pci conf
[ 0.404198] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.404203] pci 0000:01:00.0: reg 14: [mem 0xdfee0000-0xdfefffff]
[ 0.404208] pci 0000:01:00.0: reg 18: [io 0xcc00-0xcc7f]
[ 0.404224] pci 0000:01:00.0: supports D1 D2
[ 0.404242] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.404247] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.404252] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.404258] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
[ 0.404317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.437387] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.437519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.437646] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.437772] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.437907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.438044] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.438175] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.438305] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.438582] SCSI subsystem initialized
[ 0.439025] libata version 3.00 loaded.
[ 0.439127] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439130] vgaarb: loaded
[ 0.439173] usbcore: registered new interface driver usbfs
[ 0.439196] usbcore: registered new interface driver hub
[ 0.439232] usbcore: registered new device driver usb
[ 0.439328] PCI: Using ACPI for IRQ routing
[ 0.439332] PCI: pci_cache_line_size set to 64 bytes
[ 0.439403] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.439407] reserve RAM buffer: 0000000037fd0000 - 0000000037ffffff
[ 0.439535] NetLabel: Initializing
[ 0.439537] NetLabel: domain hash size = 128
[ 0.439539] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.439557] NetLabel: unlabeled traffic allowed by default
[ 0.439586] Switching to clocksource tsc
[ 0.442008] AppArmor: AppArmor Filesystem Enabled
[ 0.442036] pnp: PnP ACPI init
[ 0.442062] ACPI: bus type pnp registered
[ 0.444323] pnp: PnP ACPI: found 10 devices
[ 0.444326] ACPI: ACPI bus type pnp unregistered
[ 0.444347] system 00:07: [io 0x0480-0x048f] has been reserved
[ 0.444352] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.444356] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.444360] system 00:07: [io 0x0880-0x08ff] has been reserved
[ 0.444363] system 00:07: [io 0x0c00-0x0c1f] has been reserved
[ 0.444369] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.444374] system 00:07: [mem 0xffe80000-0xffefffff] has been reserved
[ 0.444378] system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.444388] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.444392] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.444399] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.444403] system 00:09: [mem 0x000c0000-0x000d0fff] could not be reserved
[ 0.444407] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.444412] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.479553] pci 0000:00:09.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[ 0.479558] pci 0000:00:09.0: BAR 16: assigned [mem 0x44000000-0x47ffffff]
[ 0.479562] pci 0000:00:09.1: BAR 15: assigned [mem 0x48000000-0x4bffffff pref]
[ 0.479566] pci 0000:00:09.1: BAR 16: assigned [mem 0x4c000000-0x4fffffff]
[ 0.479570] pci 0000:00:09.0: BAR 0: assigned [mem 0x50000000-0x50000fff]
[ 0.479577] pci 0000:00:09.0: BAR 0: set to [mem 0x50000000-0x50000fff] (PCI address [0x50000000-0x50000fff]
[ 0.479581] pci 0000:00:09.1: BAR 0: assigned [mem 0x50001000-0x50001fff]
[ 0.479587] pci 0000:00:09.1: BAR 0: set to [mem 0x50001000-0x50001fff] (PCI address [0x50001000-0x50001fff]
[ 0.479592] pci 0000:00:09.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.479596] pci 0000:00:09.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.479600] pci 0000:00:09.1: BAR 13: assigned [io 0x1800-0x18ff]
[ 0.479604] pci 0000:00:09.1: BAR 14: assigned [io 0x1c00-0x1cff]
[ 0.479608] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.479612] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.479617] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.479622] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
[ 0.479628] pci 0000:00:09.0: CardBus bridge to [bus 02-05]
[ 0.479631] pci 0000:00:09.0: bridge window [io 0x1000-0x10ff]
[ 0.479635] pci 0000:00:09.0: bridge window [io 0x1400-0x14ff]
[ 0.479640] pci 0000:00:09.0: bridge window [mem 0x40000000-0x43ffffff pref]
[ 0.479645] pci 0000:00:09.0: bridge window [mem 0x44000000-0x47ffffff]
[ 0.479649] pci 0000:00:09.1: CardBus bridge to [bus 06-09]
[ 0.479652] pci 0000:00:09.1: bridge window [io 0x1800-0x18ff]
[ 0.479656] pci 0000:00:09.1: bridge window [io 0x1c00-0x1cff]
[ 0.479660] pci 0000:00:09.1: bridge window [mem 0x48000000-0x4bffffff pref]
[ 0.479665] pci 0000:00:09.1: bridge window [mem 0x4c000000-0x4fffffff]
[ 0.479685] alloc irq_desc for 17 on node 0
[ 0.479688] alloc kstat_irqs on node 0
[ 0.479698] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.479707] pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.479713] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.479716] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.479719] pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
[ 0.479723] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.479726] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.479729] pci_bus 0000:01: resource 2 [mem 0xcfd00000-0xdfcfffff pref]
[ 0.479733] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.479736] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.479739] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
[ 0.479742] pci_bus 0000:02: resource 3 [mem 0x44000000-0x47ffffff]
[ 0.479745] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.479748] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
[ 0.479752] pci_bus 0000:06: resource 2 [mem 0x48000000-0x4bffffff pref]
[ 0.479755] pci_bus 0000:06: resource 3 [mem 0x4c000000-0x4fffffff]
[ 0.479832] NET: Registered protocol family 2
[ 0.479920] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.480342] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.481647] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.482303] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.482307] TCP reno registered
[ 0.482315] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.482338] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.482502] NET: Registered protocol family 1
[ 0.534009] pci 0000:01:00.0: Boot video device
[ 0.534012] PCI: CLS 64 bytes, default 64
[ 0.534357] Scanning for low memory corruption every 60 seconds
[ 0.534520] audit: initializing netlink socket (disabled)
[ 0.534539] type=2000 audit(1279389568.533:1): initialized
[ 0.549957] highmem bounce pool size: 64 pages
[ 0.549964] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550978] VFS: Disk quotas dquot_6.5.2
[ 0.551011] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.551194] msgmni has been set to 431
[ 0.552002] alg: No test for stdrng (krng)
[ 0.552053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552058] io scheduler noop registered
[ 0.552061] io scheduler deadline registered
[ 0.552083] io scheduler cfq registered (default)
[ 0.553045] pci-stub: invalid id string ""
[ 0.553550] vesafb: framebuffer at 0xd0000000, mapped to 0xf7a80000, using 3840k, total 16384k
[ 0.553554] vesafb: mode is 1280x768x16, linelength=2560, pages=3
[ 0.553557] vesafb: protected mode interface info at cbe6:0008
[ 0.553560] vesafb: pmi: set display start = c00cbe92, set palette = c00cbed6
[ 0.553564] vesafb: scrolling: redraw
[ 0.553567] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.554110] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.554115] bootsplash: silentjpeg size 168239 bytes
[ 0.582338] bootsplash: ...found (1280x768, 85531 bytes, v3).
[ 0.652662] Console: switching to colour frame buffer device 156x44
[ 0.722168] fb0: VESA VGA frame buffer device
[ 0.724250] Non-volatile memory driver v1.3
[ 0.724253] Linux agpgart interface v0.103
[ 0.724342] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 0.725736] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 0.725806] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.726968] alloc irq_desc for 18 on node 0
[ 0.726972] alloc kstat_irqs on node 0
[ 0.726982] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.726989] serial 0000:00:02.6: PCI INT C disabled
[ 0.727202] Fixed MDIO Bus: probed
[ 0.727210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.727952] alloc irq_desc for 23 on node 0
[ 0.727955] alloc kstat_irqs on node 0
[ 0.727960] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.727983] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.728013] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.728055] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 0.728077] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000
[ 0.733942] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.733974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.733979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.733983] usb usb1: Product: EHCI Host Controller
[ 0.733986] usb usb1: Manufacturer: Linux 2.6.34-12-desktop ehci_hcd
[ 0.733989] usb usb1: SerialNumber: 0000:00:03.3
[ 0.734143] hub 1-0:1.0: USB hub found
[ 0.734151] hub 1-0:1.0: 6 ports detected
[ 0.734241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.734955] alloc irq_desc for 20 on node 0
[ 0.734958] alloc kstat_irqs on node 0
[ 0.734965] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.734980] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.734990] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.735018] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000
[ 0.787957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787964] usb usb2: Product: OHCI Host Controller
[ 0.787967] usb usb2: Manufacturer: Linux 2.6.34-12-desktop ohci_hcd
[ 0.787970] usb usb2: SerialNumber: 0000:00:03.0
[ 0.788091] hub 2-0:1.0: USB hub found
[ 0.788099] hub 2-0:1.0: 3 ports detected
[ 0.788942] alloc irq_desc for 21 on node 0
[ 0.788944] alloc kstat_irqs on node 0
[ 0.788950] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.788963] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.788972] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.788997] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[ 0.841946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.841950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.841954] usb usb3: Product: OHCI Host Controller
[ 0.841957] usb usb3: Manufacturer: Linux 2.6.34-12-desktop ohci_hcd
[ 0.841960] usb usb3: SerialNumber: 0000:00:03.1
[ 0.842072] hub 3-0:1.0: USB hub found
[ 0.842081] hub 3-0:1.0: 3 ports detected
[ 0.842151] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.842203] Initializing USB Mass Storage driver...
[ 0.842237] usbcore: registered new interface driver usb-storage
[ 0.842240] USB Mass Storage support registered.
[ 0.842255] usbcore: registered new interface driver ums-alauda
[ 0.842270] usbcore: registered new interface driver ums-cypress
[ 0.842286] usbcore: registered new interface driver ums-datafab
[ 0.842301] usbcore: registered new interface driver ums-freecom
[ 0.842317] usbcore: registered new interface driver ums-isd200
[ 0.842332] usbcore: registered new interface driver ums-jumpshot
[ 0.842350] usbcore: registered new interface driver ums-karma
[ 0.842365] usbcore: registered new interface driver ums-onetouch
[ 0.842381] usbcore: registered new interface driver ums-sddr09
[ 0.842397] usbcore: registered new interface driver ums-sddr55
[ 0.842412] usbcore: registered new interface driver ums-usbat
[ 0.842465] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.847086] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 0.847964] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.847971] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.847975] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.847979] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.847983] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.848073] mice: PS/2 mouse device common for all mice
[ 0.848301] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.848329] rtc0: alarms up to one month, 114 bytes nvram
[ 0.848345] cpuidle: using governor ladder
[ 0.848349] cpuidle: using governor menu
[ 0.848757] usbcore: registered new interface driver hiddev
[ 0.848776] usbcore: registered new interface driver usbhid
[ 0.848779] usbhid: USB HID core driver
[ 1.113540] TCP cubic registered
[ 1.113615] NET: Registered protocol family 10
[ 1.114017] lo: Disabled Privacy Extensions
[ 1.114298] lib80211: common routines for IEEE802.11 drivers
[ 1.114302] lib80211_crypt: registered algorithm 'NULL'
[ 1.114327] Using IPI No-Shortcut mode
[ 1.114453] PM: Checking image partition /dev/disk/by-id/ata-SAMSUNG_HM160HC_S12TJD0S163947-part1
[ 1.114948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.812073] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a/0x0
[ 1.850784] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1
[ 1.853721] PM: Resume from disk failed.
[ 1.853741] registered taskstats version 1
[ 1.853949] Magic number: 2:529:997
[ 1.854038] rtc_cmos 00:02: setting system clock to 2010-07-17 17:59:30 UTC (1279389570)
[ 1.854139] Freeing unused kernel memory: 428k freed
[ 1.854543] Write protecting the kernel text: 4444k
[ 1.854624] Write protecting the kernel read-only data: 2976k
[ 1.915634] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.915651] ACPI: Thermal Zone [THRM] (57 C)
[ 1.921012] pata_sis 0000:00:02.5: version 0.5.2
[ 1.921189] scsi0 : pata_sis
[ 1.921314] scsi1 : pata_sis
[ 1.922289] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.922293] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.078008] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[ 2.078013] ata1.00: 312581808 sectors, multi 16: LBA48
[ 2.078038] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 2.086007] ata1.00: configured for UDMA/33
[ 2.086146] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
[ 2.086395] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.086449] sd 0:0:0:0: [sda] Write Protect is off
[ 2.086454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.086477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.086626] sda: sda1 sda2 sda3
[ 2.146396] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.256232] ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 2.58, max UDMA/33
[ 2.294245] ata2.00: configured for UDMA/33
[ 2.346649] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6500A 2.58 PQ: 0 ANSI: 5
[ 2.359100] Marking TSC unstable due to TSC halts in idle
[ 2.363394] Switching to clocksource acpi_pm
[ 2.374166] udev: starting version 157
[ 3.010993] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.011011] PM: Basic memory bitmaps created
[ 3.026597] PM: Basic memory bitmaps freed
[ 3.038845] PM: Starting manual resume from disk
[ 3.038850] PM: Resume from partition 8:1
[ 3.038853] PM: Checking hibernation image.
[ 3.039186] PM: Error -22 checking image file
[ 3.039189] PM: Resume from disk failed.
[ 3.265079] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 5.077460] preloadtrace: systemtap: 1.1/0.147, base: f7fc7000, memory: 24data/38text/6ctx/13net/260alloc kb, probes: 34
[ 6.371171] udev: starting version 157
[ 6.575187] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 6.672508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.841990] sis900.c: v1.08.10 Apr. 2 2006
[ 6.842655] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.842743] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.847187] alloc irq_desc for 19 on node 0
[ 6.847193] alloc kstat_irqs on node 0
[ 6.847205] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.850268] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/PNP0C0D:00/input/input2
[ 6.850461] ACPI: Lid Switch [LID]
[ 6.851279] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.851413] ACPI: Sleep Button [SLPB]
[ 6.852311] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.856046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.856212] ACPI: Power Button [PWRB]
[ 6.856340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.856421] ACPI: Power Button [PWRF]
[ 6.857206] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 6.890890] 0000:00:04.0: Using transceiver found at address 1 as default
[ 6.896996] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:1c:a4:c4
[ 6.906931] ACPI: AC Adapter [AC0] (on-line)
[ 6.910112] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 6.911238] acpi device:02: registered as cooling_device1
[ 6.911827] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input7
[ 6.912148] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.929092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.941522] ohci1394 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.964220] ACPI: Battery Slot [BAT0] (battery present)
[ 6.992060] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.000105] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:106c]
[ 7.000126] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst
[ 7.079259] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 7.079266] Uniform CD-ROM driver Revision: 3.20
[ 7.079424] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.124959] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0ab8, PCI irq 17
[ 7.124966] yenta_cardbus 0000:00:09.0: Socket status: 30000820
[ 7.136090] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.147078] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.962023] intel8x0_measure_ac97_clock: measured 50466 usecs (2428 samples)
[ 7.962029] intel8x0: clocking to 48000
[ 7.967536] yenta_cardbus 0000:00:09.1: CardBus bridge found [1734:106c]
[ 8.006023] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 8.006065] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00001fff]
[ 8.006114] pci 0000:02:00.0: supports D1 D2
[ 8.006118] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 8.006123] pci 0000:02:00.0: PME# disabled
[ 8.006139] pci 0000:02:00.0: BAR 0: assigned [mem 0x44000000-0x44001fff]
[ 8.006146] pci 0000:02:00.0: BAR 0: set to [mem 0x44000000-0x44001fff] (PCI address [0x44000000-0x44001fff]
[ 8.089944] yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0ab8, PCI irq 17
[ 8.089950] yenta_cardbus 0000:00:09.1: Socket status: 30000006
[ 8.104362] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 8.104446] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.104660] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.153732] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 8.153816] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.153902] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.252158] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d5325513989]
[ 8.382652] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k
[ 9.769857] device-mapper: uevent: version 1.0.3
[ 9.770928] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 10.281245] loop: module loaded
[ 10.458475] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 10.924093] fuse init (API version 7.13)
[ 11.795136] type=1505 audit(1279389580.440:2): operation="profile_load" pid=931 name=/bin/ping
[ 11.900464] type=1505 audit(1279389580.545:3): operation="profile_load" pid=959 name=/sbin/klogd
[ 12.180673] type=1505 audit(1279389580.825:4): operation="profile_load" pid=960 name=/sbin/syslog-ng
[ 12.351437] type=1505 audit(1279389580.996:5): operation="profile_load" pid=1003 name=/sbin/syslogd
[ 12.530838] type=1505 audit(1279389581.175:6): operation="profile_load" pid=1004 name=/usr/sbin/avahi-daemon
[ 12.672340] type=1505 audit(1279389581.317:7): operation="profile_load" pid=1005 name=/usr/sbin/identd
[ 12.836061] type=1505 audit(1279389581.481:8): operation="profile_load" pid=1006 name=/usr/sbin/mdnsd
[ 13.025261] type=1505 audit(1279389581.670:9): operation="profile_load" pid=1007 name=/usr/sbin/nscd
[ 13.303699] type=1505 audit(1279389581.948:10): operation="profile_load" pid=1008 name=/usr/sbin/ntpd
[ 13.441245] type=1505 audit(1279389582.086:11): operation="profile_load" pid=1009 name=/usr/sbin/traceroute
[ 17.306676] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ (1 cpu cores) (version 2.20.00)
[ 17.308036] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 17.308040] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 19.569427] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.083238] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.119063] nf_conntrack version 0.5.0 (13918 buckets, 55672 max)
[ 26.893206] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 28.028066] NET: Registered protocol family 17
[ 29.865118] eth0: Media Link On 100mbps full-duplex
[ 34.649148] RPC: Registered udp transport module.
[ 34.649154] RPC: Registered tcp transport module.
[ 34.649157] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 34.682826] Slow work thread pool: Starting up
[ 34.686055] Slow work thread pool: Ready
[ 34.686121] FS-Cache: Loaded
[ 34.744144] FS-Cache: Netfs 'nfs' registered for caching
[ 35.963115] bootsplash: status on console 0 changed to on
[ 38.288123] eth0: no IPv6 routers present
[ 41.750532] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_thresholdVon dem Script kommt dieses Ergebnis:
Code:
collectNWData.sh V0.6.3.8-6 (Rev: 1.237, Build: 2010/07/17 08:26:47 UTC)
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgefuehrt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1
--- NWEliza untersucht das System nach haeufigen Netzwerkkonfigurationsfehlern ...
!!! CND0230W: IPV6 ist eingeschaltet
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden koennen.
==================================================================================================================
==================================================================================================================
*** uname -a
Linux linux-ulaa 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
==================================================================================================================
*** cat /etc/*[-_]release || cat /etc/*[-_]version
/etc/SuSE-release
openSUSE 11.3 (i586)
VERSION = 11.3
==================================================================================================================
*** cat /etc/resolv | grep -i "nameserver"
==================================================================================================================
*** cat /etc/hosts
127.0.0.1 localhost
127.0.0.2 linux-ulaa.site linux-ulaa
==================================================================================================================
*** route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
==================================================================================================================
*** ifconfig
eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
inet6 Adresse: fe80::203:dff:fe1c:a4c4/64 Gültigkeitsbereich:Verbindung
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:148590 errors:0 dropped:0 overruns:0 frame:0
TX packets:85774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:219255122 (209.0 Mb) TX bytes:6441797 (6.1 Mb)
Interrupt:19 Basisadresse:0xd800
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:7004 (6.8 Kb) TX bytes:7004 (6.8 Kb)
==================================================================================================================
*** ping tests
connect: Network is unreachable
Ping of 195.135.220.3 failed
ping: unknown host www.suse.de
Ping of www.suse.de failed
==================================================================================================================
*** dhcpcd-test
==================================================================================================================
*** lspci
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
02:00.0 Network controller [0280]: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] [1260:3886] (rev 01)
==================================================================================================================
*** lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c526 Logitech, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==================================================================================================================
*** hwinfo (filtered)
18: PCI 04.0: 0200 Ethernet controller
Model: "Silicon Integrated SiS900 PCI Fast Ethernet"
Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
Device: pci 0x0900 "SiS900 PCI Fast Ethernet"
SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
SubDevice: pci 0x106c
Driver: "sis900"
Driver Modules: "sis900"
Device File: eth0
Link detected: no
Driver Status: sis900 is active
Driver Activation Cmd: "modprobe sis900"
28: PCI 200.0: 0282 WLAN controller
Model: "Intersil ISL3886 [Prism Javelin/Prism Xbow]"
Vendor: pci 0x1260 "Intersil Corporation"
Device: pci 0x3886 "ISL3886 [Prism Javelin/Prism Xbow]"
SubVendor: pci 0x17cf "Z-Com, Inc."
SubDevice: pci 0x0035
Driver Status: prism54 is not active
Driver Activation Cmd: "modprobe prism54"
Driver Status: p54pci is not active
Driver Activation Cmd: "modprobe p54pci"
==================================================================================================================
*** lsmod # (filtered)
| ac | ac97_bus | af_packet | fscache | i2c_sis96x |
| ieee1394 | ip_tables | jbd2 | k8temp | mperf |
| ohci1394 | pci_hotplug | powernow_k8 | rsrc_nonstatic | serio_raw |
| sg | shpchp | sis900 | sr_mod | xt_limit |
| xt_NOTRACK | xt_pkttype | xt_state | yenta_socket |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]*
ls: Zugriff auf /etc/sysconfig/network/ifcfg-[earwd]* nicht möglich: Datei oder Verzeichnis nicht gefunden
==================================================================================================================
*** iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
==================================================================================================================
*** Actual date for bias of following greps
21:13:17 2010-07-17
==================================================================================================================
*** grep -i radio /var/log/messages* | tail -n 5
Jul 17 15:27:56 linux-ulaa kernel: [ 1869.260067] Registered led device: p54-phy1::radio
==================================================================================================================
*** dmesg | grep -i radio | tail -n 5
==================================================================================================================
*** tail -n 300 /var/log/messages* | /bin/grep -i firmware | tail -n 5
==================================================================================================================
*** ls /lib/firmware/*
| 2.6.34-12-desktop | 3CCFEM556.cis | 3CXEM556.cis | COMpad2.cis |
| COMpad4.cis | DP83903.cis | E-CARD.cis | isl3886 |
| LA-PCM.cis | microcode.dat | MT5634ZLX.cis | NE2K.cis |
| PCMLM28.cis | PE-200.cis | PE520.cis | RS-COM-2P.cis |
| tamarack.cis |
==================================================================================================================
*** ndiswrapper -l
No ndiswrapper module loaded
==================================================================================================================
*** Active processes
wpa_supplicant:YES knetworkmanager:YES nm-applet:NO
==================================================================================================================
*** egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$"
NETWORKMANAGER="yes"
==================================================================================================================
*** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net*
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
==================================================================================================================
*** iwlist scanning
No WLANs found
==================================================================================================================
*** NWElizaStates V0.6.3.8-6
IF:eth0 IM:1 DI:1 AP:0 FALON:1 NI:1 cNI:1 NDIS:0 IP6:1 KM:0 WLW:0 RTDT:SuSEUnd was ich gar nicht weiß, wie setze ich prism54 auf eine Balcklist?
Dürfte nicht mehr nötig sein.Strietzl schrieb:
Code:
tomfa@klappstuhl:~> ls /etc/modprobe.d/
00-system.conf 50-blacklist.conf 50-bluetooth.conf 50-ipw2200.conf 50-nvidia.conf 50-sound.conf 50-thinkpad_acpi.conf 50-yast.conf 99-local.conf
10-unsupported-modules.conf 50-blacklist.conf~ 50-ipv6.conf 50-iwl3945.conf 50-prism54.conf 50-sound.conf.YaST2save 50-tv.conf 50-yast.conf.YaST2save b43.conf
Code:
tomfa@klappstuhl:~> cat /etc/modprobe.d/50-prism54.conf
blacklist prism54Was ergibt denn:
Code:
modprobe p54pci
OP
Da kommt dann folgende Meldung:
rcnetwork restart
Shutting down the NetworkManager done
Shutting down network interfaces:
eth0 device: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
No configuration found for eth0
Nevertheless the interface will be shut down.
eth0 done
wlan0 device: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
No configuration found for wlan0
Nevertheless the interface will be shut down.
wlan0 done
Shutting down service network . . . . . . . . . done
Starting the NetworkManager done
Connecting............... 1s
Eine Wlan- Verbindung kommt auch weiterhin nicht zu stande, die LED "Act." an der Karte leuchtet jetzt gelb und im Network Manager heißt es, "Autorisierung wird erwartet". Die Signalstärke liegt laut Anzeige bei um die 50%, was überhaupt nicht stimmen kann, denn ich bin nur 3 Meter vom Router entfernt und es ist auch keine Wand dazwischen.
rcnetwork restart
Shutting down the NetworkManager done
Shutting down network interfaces:
eth0 device: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
No configuration found for eth0
Nevertheless the interface will be shut down.
eth0 done
wlan0 device: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
No configuration found for wlan0
Nevertheless the interface will be shut down.
wlan0 done
Shutting down service network . . . . . . . . . done
Starting the NetworkManager done
Connecting............... 1s
Eine Wlan- Verbindung kommt auch weiterhin nicht zu stande, die LED "Act." an der Karte leuchtet jetzt gelb und im Network Manager heißt es, "Autorisierung wird erwartet". Die Signalstärke liegt laut Anzeige bei um die 50%, was überhaupt nicht stimmen kann, denn ich bin nur 3 Meter vom Router entfernt und es ist auch keine Wand dazwischen.
Ja, die gute alte Prism-Karte...ich ärgere mich auch jedesmal dass SUSE nicht die Open-Source Firmware mitschicken kann... (siehe
https://bugzilla.novell.com/show_bug.cgi?id=300794)
Vesuch mal die klassische if-up/down Methode:
http://en.opensuse.org/SDB:Tracking_down_wireless_problems#How_to_set_up_a_connection_manually
Hast Du ggf. ein Netzwerk mit WEp-Verschlüsselung laufen?
https://bugzilla.novell.com/show_bug.cgi?id=300794)
Vesuch mal die klassische if-up/down Methode:
http://en.opensuse.org/SDB:Tracking_down_wireless_problems#How_to_set_up_a_connection_manually
Hast Du ggf. ein Netzwerk mit WEp-Verschlüsselung laufen?
OP
Der Fall hat sich für mich erledigt, denn ich hab das alte Notebook mittlerweile entsorgt und mit ihm auch gleich diese nervige WLAN- Karte. Ich hab jetzt ein Terra Mobile 1545, mit eingebautem WLAN. Da funktionierte gleich nach der Installation alles und ich hab keine Probleme mehr.