Hallo bin neu hier im Forum und eher Linux-Neuling.
Hab schon fleißig im Forum gesucht aber irgendwie nichts zu meinem Problem gefunden.
Hab für meinen Zweit-PC (Compaq mit Pentium III 600 MHz) eine Festplatte gekauft (80 GB) da die alte 6 GB für Suse und Win XP zu klein war.
Als ich XP installiert habe hat alles funktioniert, wie ich aber Suse 10 dazu installiert hab kam bloß noch Grub Error 18 ( Maximum Bios exceeds.. oder so ähnlich) und der PC konnte nix mehr booten. Vermute das das alte Bios damit nicht zurecht kommt (es gibt aber glaub ich kein aktuelleres)
Hab dann als Trick die alte 6 GB-Platte als Master (davor) geschalten und kann so jetzt mein SuperSuse 10 auf der 6 GB booten; nach längerem Tricksen kann ich auch wieder Win XP auf der 80 GB (Slave-)Festplatte starten.
Das immer noch installierte Suse 10 auf der "großen" 80 GB kann ich aber nicht booten. Gibts irgend einen Trick vom Bootloader auf der 6 Gb Festplatte aus zu booten?
Was für Infos sind notwendig?
Hier meine device.map
(hd1) /dev/hdb
(fd0) /dev/fd0
(hd0) /dev/hda
Und die menu.lst
###Don't change this comment - YaST2 identifier: Original name: linux###
title superSUSE 10
root (hd0,1)
kernel /boot/vmlinuz root=/dev/hda2 vga=0x31a selinux=0 resume=/dev/hda1 splash=silent showopts
initrd /boot/initrd
###Don't change this comment - YaST2 identifier: Original name: SUSE LINUX 10.0 (/dev/hdb2)###
title SUSE LINUX 10.0 (/dev/hdb2)
kernel (hd1,1)/boot/vmlinuz root=/dev/hdb2 vga=0x31a selinux=0 resume=/dev/hda1 splash=silent showopts
chainloader (hd1,1)+1
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd1,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
chainloader (fd0)+1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX 10.0
root (hd0,1)
kernel /boot/vmlinuz root=/dev/hda2 vga=normal showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd
Sind noch weitere Infos relevant?
Vielen Dank im voraus
thio
Hab schon fleißig im Forum gesucht aber irgendwie nichts zu meinem Problem gefunden.
Hab für meinen Zweit-PC (Compaq mit Pentium III 600 MHz) eine Festplatte gekauft (80 GB) da die alte 6 GB für Suse und Win XP zu klein war.
Als ich XP installiert habe hat alles funktioniert, wie ich aber Suse 10 dazu installiert hab kam bloß noch Grub Error 18 ( Maximum Bios exceeds.. oder so ähnlich) und der PC konnte nix mehr booten. Vermute das das alte Bios damit nicht zurecht kommt (es gibt aber glaub ich kein aktuelleres)
Hab dann als Trick die alte 6 GB-Platte als Master (davor) geschalten und kann so jetzt mein SuperSuse 10 auf der 6 GB booten; nach längerem Tricksen kann ich auch wieder Win XP auf der 80 GB (Slave-)Festplatte starten.
Das immer noch installierte Suse 10 auf der "großen" 80 GB kann ich aber nicht booten. Gibts irgend einen Trick vom Bootloader auf der 6 Gb Festplatte aus zu booten?
Was für Infos sind notwendig?
Hier meine device.map
(hd1) /dev/hdb
(fd0) /dev/fd0
(hd0) /dev/hda
Und die menu.lst
###Don't change this comment - YaST2 identifier: Original name: linux###
title superSUSE 10
root (hd0,1)
kernel /boot/vmlinuz root=/dev/hda2 vga=0x31a selinux=0 resume=/dev/hda1 splash=silent showopts
initrd /boot/initrd
###Don't change this comment - YaST2 identifier: Original name: SUSE LINUX 10.0 (/dev/hdb2)###
title SUSE LINUX 10.0 (/dev/hdb2)
kernel (hd1,1)/boot/vmlinuz root=/dev/hdb2 vga=0x31a selinux=0 resume=/dev/hda1 splash=silent showopts
chainloader (hd1,1)+1
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd1,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
chainloader (fd0)+1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX 10.0
root (hd0,1)
kernel /boot/vmlinuz root=/dev/hda2 vga=normal showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd
Sind noch weitere Infos relevant?
Vielen Dank im voraus
thio