• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

MA111 und Suse 9.1 - nach Neustart keine Verbindung möglich

helge

Newbie
Hallo zusammen,

habe hier folgende Konfiguration:

Suse 9.1 Personal
Netgear MA111 USB (lt. Google wohl Prism-Chipsatz)

Ich habe mir mit Yast das MA111-Teil installiert (mit dem prism_usb Modul) und alles weitere (Defaultroute, Netzwerkname, Verschlüsselung) soweit eingerichtet. Habe den MA111 Stick nicht per DHCP konfiguriert, sondern ihm direkt eine Adresse zugewiesen und die Nameserver meines Providers in Yast eingetragen. Direkt danach kann ich auch den AP erreichen und habe auch Netzzugang. Wenn ich mein System aber neu boote, funktioniert der Netzzugang nicht mehr und den AP kann ich auch nicht erreichen. iwconfig zeigt mir aber ein wlan0 an (also wird der Stick doch erkannt, oder?) Folgendes sagt meine /var/log/boot.msg dazu:

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hotplug)
Initializing random number generatordone
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (coldplug)
coldplughwup: Loading module 'prism2_usb' for device 'static-0'
scanning input: done
scanning pci: ******.W*WWWdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
eth0 configuration: eth-id-00:07:95:55:4f:9a
eth0 (DHCP) . . . . . no IP address yet... backgrounding.
waiting
<notice>checkproc: /sbin/dhcpcd 2083
Waiting for mandatory devices: eth-id-00:07:95:55:4f:9a wlan0
11 <notice>checkproc: /sbin/dhcpcd 2083
10 <notice>checkproc: /sbin/dhcpcd 2083
8 <notice>checkproc: /sbin/dhcpcd 2083
7 <notice>checkproc: /sbin/dhcpcd 2083
6 <notice>checkproc: /sbin/dhcpcd 2083
4 <notice>checkproc: /sbin/dhcpcd 2083
3 <notice>checkproc: /sbin/dhcpcd 2083
2 <notice>checkproc: /sbin/dhcpcd 2083
0 <notice>checkproc: /sbin/dhcpcd 2083

eth0 interface could not be set up
failed wlan0 interface could not be set up
failedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (smbfs)
Mount SMB File System unused
<notice>exit status of (smbfs) is (6)
<notice>start services (splash_early resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting resource managerdone
Starting RPC portmap daemondone
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) Backgrounding to notify hosts...
done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done
Starting sound driver: intel8x0done
Restoring the previous sound settingdone
<notice>exit status of (sshd powersaved fbset alsasound) is (0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=55 SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=42 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=147 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=55 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=silent sscripts=43 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(938,3)

Anscheinend wird Network nicht geladen. Bei meiner Google-Suche bin ich auf jemanden mit einem ähnlichen Problem gestoßen, bei ihm ließ sich das Problem mit rcnetwork restart lösen. Bei mir leider nicht. Ein anderer Tip war, den Stecker wieder rauszuziehen und neu reinzustecken, so das das ganze neu geladen wird. Der Stick wird zwar neu geladen, danach passiert aber auch nichts. /var/log/messages sagt beim rausziehen und reinstecken folgendes:

May 10 20:26:49 linux kernel: eth0: no IPv6 routers present
May 10 20:27:49 linux su: pam_unix2: session finished for user root, service su
May 10 20:31:28 linux su: (to root) helge on /dev/pts/39
May 10 20:31:28 linux su: pam_unix2: session started for user root, service su
May 10 20:31:28 linux su: pam_unix2: session finished for user root, service su
May 10 20:31:28 linux su: (to root) helge on /dev/pts/40
May 10 20:31:28 linux su: pam_unix2: session started for user root, service su
May 10 20:33:51 linux kernel: usb 2-1: USB disconnect, address 2
May 10 20:33:51 linux /etc/hotplug/usb.agent[4648]: need a device for this command
May 10 20:33:54 linux kernel: usb 2-1: new full speed USB device using address 3
May 10 20:33:55 linux /etc/hotplug/usb.agent[4749]: need a device for this command
May 10 20:33:55 linux /etc/hotplug/net.agent[4750]: SIOCSIFFLAGS: No such device
May 10 20:33:55 linux kernel: ident: nic h/w: id=0x8026 1.0.0
May 10 20:33:55 linux kernel: ident: pri f/w: id=0x15 1.1.3
May 10 20:33:55 linux kernel: ident: sta f/w: id=0x1f 1.7.0
May 10 20:33:55 linux kernel: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
May 10 20:33:55 linux kernel: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
May 10 20:33:55 linux kernel: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
May 10 20:33:55 linux kernel: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12
May 10 20:33:55 linux kernel: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
May 10 20:33:55 linux kernel: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
May 10 20:33:55 linux kernel: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
May 10 20:33:55 linux kernel: Prism2 card SN: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
May 10 20:33:55 linux kernel: dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.

Die letze Zeile bereitet mir Kopfschmerzen, das hört sich nicht so gesund an, ich weiß diese Zeile aber nicht zu deuten (bin auch nach einer Google Suche nicht wirklich schlauer geworden). Meine Frage nun: Hat jemand eine Idee was bei mir falsch läuft und kann mir einen Tip geben wie ich das ganze zum Laufen bringen kann, oder wo ich weitersuchen könnte um den Fehler einzukreisen? Bin leider (noch) ein ziemlicher Linux-Neuling und ich weiß nicht so recht wo ich hier ansetzen soll.

Vielen Dank schonmal für jegliche Hilfe :)
 
A

Anonymous

Gast
lok such ich mit google das halbe www ab um darauf ne antwort zu finden, aufgegeben will das mal posten und schwups is das n thema hier.

also ich hab das gleiche problem jedoch auch unter windows xp, jedoch nicht unter win98!
ich hab einen at76c503 chipset ( allnet 183 usb wlan adapter) , da hab ich auch einen treiber für bei berlios.de gefunden. (laut na anderen page hätte ich einen realtec treiber der lies sich aber nicht installen also hgab ich mir mal die angeschlossen geräte listen lassen und da stand halt der chipset at76c503 bei )

aber zum Problem mitlerwweile hab ich mir beholfen ich muss nach dem start kabel ziehen,wieder einstecken und diese befehle ausführen:
(must du natürlich anpassen, dhcp hab ich nicht geschafft zu nutzen will ich auch nicht)

su
cd /sbin
ifconfig wlan0
ifconfig wlan0 192.168.0.228 netmask 255.255.255.0 up
cd /home/Frauke/Documents
cd wireless_tools.27
iwconfig wlan0
iwconfig wlan0 mode managed essid wlan channel 3
cd /sbin
ifconfig wlan0 up
route add default gw 192.168.0.220


So da ich n totaler linux noob bin hab ich mal noch ne frage wo kann ich die commands einfügen das die automatisch gestartet werden (also quasi die linux autoexec.bat)

ich hab Suse Linux 9.0 mit aktuellen 2.4 athlon kernel

gibt es evt ein command was alle usb geräte rauschmeißt und zur neuerkennung zwingt das wäre perfekt!
 
OP
H

helge

Newbie
Hier meine /etc/sysconfig/network/ifcfg-wlan0 datei:

Code:
BOOTPROTO='static'
BROADCAST='192.168.0.255'
IPADDR='192.168.0.2'
MTU=''
NETMASK='255.255.255.0'
NETWORK='192.168.0.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
WIRELESS_AP=''
WIRELESS_BITRATE='auto'
WIRELESS_CHANNEL=''
WIRELESS_ESSID='xxx'
WIRELESS_FREQUENCY=''
WIRELESS_KEY='xxx'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_POWER='yes'
_nm_name='static-0'

Viele Grüße,
Helge
 
Oben