Ich habe Suse 10,3 und WinXP auf einer Platte.
Nach einem Update von Suse 10.2 auf 10.3 kann man XP nicht mehr aufrufen, anstelle dessen kommt die Fehlermeldung "Error23: Error while parsing number".
Unter 10.2 lief alles einwandfrei.
Habe schon versucht:
-opensuse 10.3 starten
- yast2
- system - bootloader konfigurieren
- reiter bootloader installation
- übernehmen: 'bootloader grub'
- speicherort: häkchen setzen 'aus bootpartition'
und auch:
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd1,0)
makeactive
chainloader +1
wie an anderer Stelle hier angegeben - aber ohne Erfolg.
Vieleicht weiß ja jemand einen Rat.
Vielen Dank schon einmal im vorraus
Nach einem Update von Suse 10.2 auf 10.3 kann man XP nicht mehr aufrufen, anstelle dessen kommt die Fehlermeldung "Error23: Error while parsing number".
Unter 10.2 lief alles einwandfrei.
Habe schon versucht:
-opensuse 10.3 starten
- yast2
- system - bootloader konfigurieren
- reiter bootloader installation
- übernehmen: 'bootloader grub'
- speicherort: häkchen setzen 'aus bootpartition'
und auch:
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd1,0)
makeactive
chainloader +1
wie an anderer Stelle hier angegeben - aber ohne Erfolg.
Code:
Platte /dev/sda: 160.0 GByte, 160041885696 Byte
255 heads, 63 sectors/track, 19457 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000a9c8e
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 893 7172991 b W95 FAT32
/dev/sda2 894 2551 13317885 f W95 Erw. (LBA)
/dev/sda3 2552 2680 1036192+ 82 Linux Swap / Solaris
/dev/sda4 2681 19457 134761252+ 83 Linux
/dev/sda5 894 1276 3076416 b W95 FAT32
/dev/sda6 1277 1702 3413812 b W95 FAT32
/dev/sda7 1702 2551 6827593+ 83 Linux
cat /boot/grub/device.map
(hd0) /dev/sda
cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Sa Mär 29 19:52:31 CET 2008
default 0
timeout 8
gfxmenu (hd0,6)/boot/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3
root (hd0,6)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda7 resume=/dev/sda3 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,6)
chainloader (/dev/sdb1)+1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3
root (hd0,6)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda7 showopts ide=nodma apm=off acpi=off noresume edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: Kernel-2.6.22.17-0.1-default###
title Kernel-2.6.22.17-0.1-default
root (hd0,6)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda7 resume=/dev/sda3 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
Vieleicht weiß ja jemand einen Rat.
Vielen Dank schon einmal im vorraus