• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

neue USB Festplatte - Fehlerhaft ?

C

cbr

Hallo ich hab eine neue USB Festplatte, (WD Scorpio Blue 80GB)hab diese mit cfdisk eingerichtet und
mit mkfs jeweils ntfs und ext3 formatiert. Das lief auch. ich bekomme diese aber
nicht gemountet. Stecke ich sie über ein Adapter an bekomme ich:
Code: 
Oct 21 13:58:33 266874G kernel: [28582.739048] usb 1-3: Product: USB to ATA/ATAPI Bridge
Oct 21 13:58:33 266874G kernel: [28582.739054] usb 1-3: Manufacturer: JMicron
Oct 21 13:58:33 266874G kernel: [28582.739060] usb 1-3: SerialNumber: D57841A81532
Oct 21 13:58:33 266874G mtp-probe: checking bus 1, device 19: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3"
Oct 21 13:58:33 266874G kernel: [28582.750139] scsi9 : usb-storage 1-3:1.0
Oct 21 13:58:33 266874G mtp-probe: bus: 1, device: 19 was not an MTP device
Oct 21 13:58:34 266874G kernel: [28583.754473] scsi 9:0:0:0: Direct-Access     WDC WD80 0BEVE-00A0HT0    1A11 PQ: 0 ANSI: 2 CCS
Oct 21 13:58:34 266874G kernel: [28583.754896] sd 9:0:0:0: Attached scsi generic sg2 type 0
Oct 21 13:58:34 266874G kernel: [28583.757554] sd 9:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Oct 21 13:58:34 266874G kernel: [28583.758459] sd 9:0:0:0: [sdb] Write Protect is off
Oct 21 13:58:34 266874G kernel: [28583.758468] sd 9:0:0:0: [sdb] Mode Sense: 00 38 00 00
Oct 21 13:58:34 266874G kernel: [28583.760470] sd 9:0:0:0: [sdb] Asking for cache data failed
Oct 21 13:58:34 266874G kernel: [28583.760478] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Oct 21 13:58:34 266874G kernel: [28583.764799] sd 9:0:0:0: [sdb] Asking for cache data failed
Oct 21 13:58:34 266874G kernel: [28583.764807] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Oct 21 13:58:34 266874G kernel: [28583.810445]  sdb:
Oct 21 13:58:34 266874G ata_id[10962]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
Oct 21 13:58:34 266874G kernel: [28583.816283] sd 9:0:0:0: [sdb] Asking for cache data failed
Oct 21 13:58:34 266874G kernel: [28583.816287] sd 9:0:0:0: [sdb] Assuming drive cache: write through
Oct 21 13:58:34 266874G kernel: [28583.816291] sd 9:0:0:0: [sdb] Attached SCSI disk

Stecke ich sie in den Laptop leuchtet permanent die LD. Booten mit Opensuse DVD erkennt sie auch nicht.
Auf was deutet
Code: 
Oct 21 13:58:34 266874G ata_id[10962]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
denn hin.
Auf smartcrl reagiert sie am ext. USB:
Code: 
 smartctl -a /dev/sdb
smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (SUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue EIDE family
Device Model:     WDC WD800BEVE-00A0HT0
Serial Number:    WD-WX41A8153245
Firmware Version: 11.01A11
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Oct 21 10:43:07 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 (2580) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  34) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x2037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   159   159   021    Pre-fail  Always       -       1008
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       13
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1
 10 Spin_Retry_Count        0x0033   100   253   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       10
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       30
194 Temperature_Celsius     0x0022   111   105   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
Herz-von-Hessen

Herz-von-Hessen

Hallo cbr,

gehe ich recht in der Annahme das es sich um eine IDE-Festplatte handelt?
Wie sieht Deine /etc/fstab aus?
Mit welchem Befehl hast Du versucht die Platte zu mounten?
Was zeigt ein
Code: 
fdisk -l
über die Platte an?

lieben Gruß aus Hessen
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben