Ich betreiben einen Server mit AMD AM3+ Board (990FX chipsatz) und als einfache Grafikkarte eine passiv gekühlte HD5450 mit Pci-Express x1.
Ich verwende keine Grafikmodi und habe nur VGA=normal bzw. text mode.
Trotzdem wird die Grafikkarte (laut powertop 0.0 GPU ops/s) sehr heiß.
Läßt sich das mit irgend welchen Parametern irgendwie verbessern? Nur für die Textdarstellung sollte die Karte nicht so viel Energie verbraten.
Hier die Ausgabe von lspci -vv
Ich habe eben noch mal ein
echo dynpm >/sys/class/drm/card0/device/power_method
gesetzt. Mal sehen, ob das was bringt.
Hat sonst noch jemand einen Tip?
Ich verwende keine Grafikmodi und habe nur VGA=normal bzw. text mode.
Trotzdem wird die Grafikkarte (laut powertop 0.0 GPU ops/s) sehr heiß.
Läßt sich das mit irgend welchen Parametern irgendwie verbessern? Nur für die Textdarstellung sollte die Karte nicht so viel Energie verbraten.
Hier die Ausgabe von lspci -vv
Code:
04:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5430 Series] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device 3000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at febc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4162
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: radeon
Ich habe eben noch mal ein
echo dynpm >/sys/class/drm/card0/device/power_method
gesetzt. Mal sehen, ob das was bringt.
Hat sonst noch jemand einen Tip?