• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

PC hängt sich komplett auf

A

AusEssen

Ich habe suse 11.3 neu installiert und das System lief einige Wochen ohne Probleme (ausser bei Kmail). Ohne das ich Änderungen vorgenommen habe, funktioniert nun erst alles zirka 5 Minuten einwandfrei, dann ist keine Eingabe über Maus und Tastatur mehr möglich.
Da ich ein absoluter Anfänger bin, weiss ich z.Z. nicht, wie ich das Problem sinnvoll analysieren und beheben könnte.

Kann da jemand helfen?

MfG AusEssen!
 
Lese Dir Deinen Beitrag mal durch - Du wirst feststellen, dass Du die eigentliche Symptome nicht beschreibst, deshalb werden wir Dir kaum helfen können.

Eventuell wäre eine genauere Überprüfung Deiner Hardware angezeigt. Den RAM könntest Du mit memtest überprüfen (wird z.B. im Eingangsmenü der SuSE-DVD angeboten, einfach mal über Nacht laufen lassen und nach dem Aufstehen nachschauen, ob Fehler gefunden wurden). Für Festplatten bietet sich s.m.a.r.t. an, in dessen Anwendung und Ausgabe man sich aber erst mal reinfuchsen muss. Etwas einfacher ist der Hitachi Drive Fitness Test oder (falls dieser mit Deiner Festplatte nichts anfangen kann) ein entsprechendes tool vom Hersteller der HD.

Aber das ist jetzt sehr ins Blaue getippt. Wie gesagt, etwas genauer müsstest Du schon beschreiben, was da vor sich geht. Hilfreich wären eventuell Deine boot-Meldungen (während des boot-Vorgangs mal ESC drücken).
 
Hallo und vielen Dank für Deine Antwort,

mein Problem ist leider genau das, was ich beschrieben habe: nach zirka 5 Minuten steht der PC und es tut sich nichts mehr. Keine Eingabe ist mehr möglich, keine Ausgabe wird erzeugt. Alsoluter Stillstand.

Ich versuche jetzt erst einmal nach boot-Meldungen zu schauen :???:

Die verflixten Meldung sind mir durchgerutscht. Mit ESC waren sie nicht zu stoppen. Gesehen habe ich viele grüne "dones", aber leider auch etwas gelbes - wahrscheinlich eine Warnung?

Ich versuche es heute Mittag mal mit der System-DVD.

MfG AusEssen
 
Hallo,

AusEssen schrieb:
...keine Ausgabe wird erzeugt. Alsoluter Stillstand.
Zum Vergrößern anklicken....
Auch die Uhr (unten rechts, sofern installiert) steht still?

Falls die Uhr noch läuft ist Dein Problem vermutlich auf die Ein-/Ausgabe via Tastatur/Maus beschränkt -- dann würde ich auf ein Grafik Treiber Problem tippen.

Gruss,
Roland
 
Danke Roland! Die Uhr werde ich beim nächsten Versuch beobachten!

Ich habe gerade die System-DVD eingelegt und das Rettungssystem aufgerufen.
Eine "rote" Meldung habe ich:
System Boot Control: The system has been failed features boot.clock
und eine "gelbe" Meldung
Skipped features: System Boot Control: Running /etc/init.d/boot.local boot.md

Hat jemand dazu Ideen?

MfG AusEssen
 
Hallo,

AusEssen schrieb:
System Boot Control: The system has been failed features boot.clock
Zum Vergrößern anklicken....
Hast Du hier möglicherweise hier beim abschreiben die Zeilen vermischt? (macht zumindest für mich keinen Sinn).

Ich würde das System nochmals ganz normal booten und die System Ausgaben überprüfen (drücke die "Esc" Taste falls Du diese nicht siehst). Gibt es da irgendwelche Fehler Meldungen (oder Warnungen etc.)?

Roland
 
Hallo Roland,
wir haben zu zweit die Zeilen verglichen, sollte eignetlich so richtig sein.

Hallo Spoensche,
wo mnuss ich den Code setzen?

Jetzt läuft er schon 4 Minuten, die Uhr läuft ;)
 
Danke!

Jetzt läuft er schon 16 Minuten :D Ist spannender als der beste Krimi!

iris@linux-dhc0:~> dmesg
[ 0.000000] Linux version 2.6.34.7-0.5-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-10-25 08:40:12 +0200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feed000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feed000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] modified: 000000003fee0000 - 000000003feed000 (ACPI data)
[ 0.000000] modified: 000000003feed000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] found SMP MP-table at [c00f75a0] f75a0
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @ 15000-1f000
[ 0.000000] RAMDISK: 375a2000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00afc000 - 015496e6
[ 0.000000] Move RAMDISK from 00000000375a2000 - 0000000037fef6e5 to 00afc000 - 015496e5
[ 0.000000] ACPI: RSDP 000f7600 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3fee87be 0004C (v01 PTLTD ? XSDT 00050000 LTP 00000000)
[ 0.000000] ACPI: FACP 3fee887e 000F4 (v03 FSC 00050000 000F4240)
[ 0.000000] ACPI: DSDT 3fee8972 0453F (v01 FSC D2151 00050000 MSFT 02000002)
[ 0.000000] ACPI: FACS 3feedfc0 00040
[ 0.000000] ACPI: ASF! 3feeceb1 00085 (v16 OEMID OEMTBL 00050000 PTL 00000001)
[ 0.000000] ACPI: MCFG 3feecf36 00040 (v01 PTLTD MCFG 00050000 LTP 00000000)
[ 0.000000] ACPI: APIC 3feecf76 00062 (v01 FSC ? APIC 00050000 CSF 00000000)
[ 0.000000] ACPI: BOOT 3feecfd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fee0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000
[ 0.000000] node 0 pfn: [0 - 3fee0]
[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3f600
[ 0.000000] remove_active_range (0, 259584, 261632)
[ 0.000000] Reserving total of 800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36800 max_low_pfn ~ 371fe
[ 0.000000] max_pfn = 3fee0
[ 0.000000] 140MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] node 0 will remap to vaddr f6800000 - f7000000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6800000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f600
[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f800
[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003fa00
[ 0.000000] remap_numa_kva: f6e00000 to pfn 0003fc00
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x0003fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f600
[ 0.000000] 0: 0x0003fe00 -> 0x0003fee0
[ 0.000000] On node 0 totalpages: 259695
[ 0.000000] free_area_init_node: node 0, pgdat f6800000, node_mem_map c154b200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 282 pages used for memmap
[ 0.000000] HighMem zone: 33736 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xf008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1e00000 s34900 r0 d22444 u1048576
[ 0.000000] pcpu-alloc: s34900 r0 d22444 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257649
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJ1UL615293-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJ1UL615293-part1 splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000af2f64] TEXT DATA BSS
[ 0.000000] #3 [0000af3000 - 0000afb190] BRK
[ 0.000000] #4 [00000f75b0 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f75a0 - 00000f75b0] MP-table mpf
[ 0.000000] #6 [000009f800 - 000009fc70] BIOS reserved
[ 0.000000] #7 [000009fe08 - 00000f75a0] BIOS reserved
[ 0.000000] #8 [000009fc70 - 000009fe08] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 000001c000] PGTABLE
[ 0.000000] #12 [0000afc000 - 000154a000] NEW RAMDISK
[ 0.000000] #13 [003f600000 - 003fe00000] KVA RAM
[ 0.000000] #14 [0036800000 - 0037000000] KVA PG
[ 0.000000] #15 [000154a000 - 000154b000] BOOTMEM
[ 0.000000] #16 [000154b000 - 0001d4b000] BOOTMEM
[ 0.000000] #17 [0001d4b000 - 0001d4b004] BOOTMEM
[ 0.000000] #18 [0001d4b040 - 0001d4b100] BOOTMEM
[ 0.000000] #19 [0001d4b100 - 0001d4b1a4] BOOTMEM
[ 0.000000] #20 [0001d4b1c0 - 0001d4e1c0] BOOTMEM
[ 0.000000] #21 [0001d4e1c0 - 0001d4e1dc] BOOTMEM
[ 0.000000] #22 [0001d4e200 - 0001d4ee00] BOOTMEM
[ 0.000000] #23 [0001d4ee00 - 0001d4ee2f] BOOTMEM
[ 0.000000] #24 [0001d4ee40 - 0001d4efcc] BOOTMEM
[ 0.000000] #25 [0001d4f000 - 0001d4f040] BOOTMEM
[ 0.000000] #26 [0001d4f040 - 0001d4f080] BOOTMEM
[ 0.000000] #27 [0001d4f080 - 0001d4f0c0] BOOTMEM
[ 0.000000] #28 [0001d4f0c0 - 0001d4f100] BOOTMEM
[ 0.000000] #29 [0001d4f100 - 0001d4f140] BOOTMEM
[ 0.000000] #30 [0001d4f140 - 0001d4f180] BOOTMEM
[ 0.000000] #31 [0001d4f180 - 0001d4f1c0] BOOTMEM
[ 0.000000] #32 [0001d4f1c0 - 0001d4f200] BOOTMEM
[ 0.000000] #33 [0001d4f200 - 0001d4f240] BOOTMEM
[ 0.000000] #34 [0001d4f240 - 0001d4f280] BOOTMEM
[ 0.000000] #35 [0001d4f280 - 0001d4f290] BOOTMEM
[ 0.000000] #36 [0001d4f2c0 - 0001d4f35c] BOOTMEM
[ 0.000000] #37 [0001d4f380 - 0001d4f41c] BOOTMEM
[ 0.000000] #38 [0001e00000 - 0001e0e000] BOOTMEM
[ 0.000000] #39 [0001f00000 - 0001f0e000] BOOTMEM
[ 0.000000] #40 [0001d51440 - 0001d51444] BOOTMEM
[ 0.000000] #41 [0001d51480 - 0001d51484] BOOTMEM
[ 0.000000] #42 [0001d514c0 - 0001d514c8] BOOTMEM
[ 0.000000] #43 [0001d51500 - 0001d51508] BOOTMEM
[ 0.000000] #44 [0001d51540 - 0001d515e0] BOOTMEM
[ 0.000000] #45 [0001d51600 - 0001d51648] BOOTMEM
[ 0.000000] #46 [0001d51680 - 0001d55680] BOOTMEM
[ 0.000000] #47 [0001d55680 - 0001dd5680] BOOTMEM
[ 0.000000] #48 [0001e0e000 - 0001e4e000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000371fe:0003fee0)
[ 0.000000] Memory: 1001672k/1047424k available (4442k kernel code, 37108k reserved, 3276k data, 424k init, 136072k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc098a000 - 0xc09f4000 ( 424 kB)
[ 0.000000] .data : 0xc0656b80 - 0xc0989ca8 (3276 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0656b80 (4442 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:8448 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2793.330 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.66 BogoMIPS (lpj=2793330)
[ 0.002008] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.002107] Security Framework initialized
[ 0.002132] AppArmor: AppArmor initialized
[ 0.002166] Mount-cache hash table entries: 512
[ 0.002352] CPU: Physical Processor ID: 0
[ 0.002355] CPU: Processor Core ID: 0
[ 0.002360] mce: CPU supports 4 MCE banks
[ 0.002377] CPU0: Thermal monitoring enabled (TM1)
[ 0.002383] using mwait in idle threads.
[ 0.002393] Performance Events: no PMU driver, software events only.
[ 0.002403] Checking 'hlt' instruction... OK.
[ 0.006676] Unpacking initramfs...
[ 0.328210] Freeing initrd memory: 10552k freed
[ 0.334342] ACPI: Core revision 20100121
[ 0.347093] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.347250] Mapping cpu 0 to node 0
[ 0.347432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.357447] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[ 0.363036] Booting Node 0, Processors #1 Ok.
[ 0.001999] Initializing CPU#1
[ 0.001999] Mapping cpu 1 to node 0
[ 0.435031] Brought up 2 CPUs
[ 0.435036] Total of 2 processors activated (11172.03 BogoMIPS).
[ 0.437068] devtmpfs: initialized
[ 0.437248] regulator: core version 0.5
[ 0.437248] regulator: dummy:
[ 0.437248] Time: 11:29:44 Date: 11/27/10
[ 0.437248] NET: Registered protocol family 16
[ 0.437369] ACPI: bus type pci registered
[ 0.437451] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.437455] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[ 0.437462] PCI: not using MMCONFIG
[ 0.438311] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=11
[ 0.438313] PCI: Using configuration type 1 for base access
[ 0.441126] bio: create slab <bio-0> at 0
[ 0.444832] ACPI: EC: Look up EC in DSDT
[ 0.450447] ACPI: Interpreter enabled
[ 0.450454] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.450499] ACPI: Using IOAPIC for interrupt routing
[ 0.459673] ACPI: No dock devices found.
[ 0.459681] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.459948] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.460457] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.460462] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.460466] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.460470] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.460473] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[ 0.460477] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[ 0.460481] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
[ 0.460484] pci_root PNP0A08:00: host bridge window [mem 0xfef00000-0xffafffff] (ignored)
[ 0.460488] pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffefffff] (ignored)
[ 0.460601] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.460606] pci 0000:00:01.0: PME# disabled
[ 0.460677] pci 0000:00:1b.0: reg 10: [mem 0xf8000000-0xf8003fff 64bit]
[ 0.460730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.460735] pci 0000:00:1b.0: PME# disabled
[ 0.460817] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.460823] pci 0000:00:1c.0: PME# disabled
[ 0.460905] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.460910] pci 0000:00:1c.1: PME# disabled
[ 0.460993] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.461004] pci 0000:00:1c.2: PME# disabled
[ 0.461087] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.461092] pci 0000:00:1c.3: PME# disabled
[ 0.461151] pci 0000:00:1d.0: reg 20: [io 0x2000-0x201f]
[ 0.461210] pci 0000:00:1d.1: reg 20: [io 0x2400-0x241f]
[ 0.461270] pci 0000:00:1d.2: reg 20: [io 0x2800-0x281f]
[ 0.461329] pci 0000:00:1d.3: reg 20: [io 0x2c00-0x2c1f]
[ 0.461384] pci 0000:00:1d.7: reg 10: [mem 0xf8004000-0xf80043ff]
[ 0.461439] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.461445] pci 0000:00:1d.7: PME# disabled
[ 0.461591] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.461600] pci 0000:00:1f.0: quirk: [io 0xf000-0xf07f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.461605] pci 0000:00:1f.0: quirk: [io 0xf180-0xf1bf] claimed by ICH6 GPIO
[ 0.461611] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 00ff)
[ 0.461663] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.461671] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.461679] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.461687] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.461695] pci 0000:00:1f.1: reg 20: [io 0x3400-0x340f]
[ 0.461747] pci 0000:00:1f.2: reg 10: [io 0x3430-0x3437]
[ 0.461755] pci 0000:00:1f.2: reg 14: [io 0x3424-0x3427]
[ 0.461762] pci 0000:00:1f.2: reg 18: [io 0x3428-0x342f]
[ 0.461770] pci 0000:00:1f.2: reg 1c: [io 0x3420-0x3423]
[ 0.461778] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
[ 0.461808] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.461813] pci 0000:00:1f.2: PME# disabled
[ 0.461865] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.461957] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.461965] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff]
[ 0.461973] pci 0000:01:00.0: reg 18: [mem 0xf8100000-0xf810ffff]
[ 0.461993] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.462024] pci 0000:01:00.0: supports D1 D2
[ 0.462058] pci 0000:01:00.1: reg 10: [mem 0xf8110000-0xf811ffff]
[ 0.462106] pci 0000:01:00.1: supports D1 D2
[ 0.462123] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.462136] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.462142] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.462147] pci 0000:00:01.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.462154] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.462206] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.462212] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.462217] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.462225] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.462321] pci 0000:05:00.0: reg 10: [mem 0xf8200000-0xf820ffff 64bit]
[ 0.462404] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.462411] pci 0000:05:00.0: PME# disabled
[ 0.462425] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.462437] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 0.462443] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.462449] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.462457] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.462509] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.462514] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.462520] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.462528] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.462579] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[ 0.462585] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.462590] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.462598] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.462674] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 0.462680] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.462685] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.462693] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.462697] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.462701] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.462737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.463043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
[ 0.463171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[ 0.463292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
[ 0.463416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
[ 0.463537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT]
[ 0.463697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[ 0.471693] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.471869] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
[ 0.472051] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.472223] ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
[ 0.472396] ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
[ 0.472568] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
[ 0.472742] ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
[ 0.472914] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
[ 0.473241] SCSI subsystem initialized
[ 0.474015] libata version 3.00 loaded.
[ 0.474113] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.474120] vgaarb: loaded
[ 0.474170] usbcore: registered new interface driver usbfs
[ 0.474196] usbcore: registered new interface driver hub
[ 0.474206] usbcore: registered new device driver usb
[ 0.474206] PCI: Using ACPI for IRQ routing
[ 0.474232] PCI: pci_cache_line_size set to 64 bytes
[ 0.474343] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.474348] reserve RAM buffer: 000000003fee0000 - 000000003fffffff
[ 0.474465] NetLabel: Initializing
[ 0.474468] NetLabel: domain hash size = 128
[ 0.474470] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.474492] NetLabel: unlabeled traffic allowed by default
[ 0.474583] hpet clockevent registered
[ 0.474589] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.474596] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.474604] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.478036] Switching to clocksource tsc
[ 0.482339] AppArmor: AppArmor Filesystem Enabled
[ 0.482356] pnp: PnP ACPI init
[ 0.482375] ACPI: bus type pnp registered
[ 0.486122] pnp: PnP ACPI: found 13 devices
[ 0.486126] ACPI: ACPI bus type pnp unregistered
[ 0.486144] system 00:01: [io 0x0cb0-0x0cbb] has been reserved
[ 0.486156] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.486161] system 00:03: [io 0xf000-0xf07f] has been reserved
[ 0.486165] system 00:03: [io 0xf100-0xf10f] has been reserved
[ 0.486169] system 00:03: [io 0xf180-0xf1bf] has been reserved
[ 0.486173] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.486177] system 00:03: [io 0xf820-0xf82f] has been reserved
[ 0.486181] system 00:03: [io 0xfe00] has been reserved
[ 0.486187] system 00:03: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.486191] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.486195] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.486200] system 00:03: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.486204] system 00:03: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.486208] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.486212] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.486217] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.522598] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.522605] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.522610] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.522614] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.522619] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.522624] pci 0000:00:1c.3: BAR 14: assigned [mem 0x40a00000-0x40bfffff]
[ 0.522628] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.522633] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.522638] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.522643] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.522647] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.522653] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8120000-0xf813ffff pref]
[ 0.522657] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.522661] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.522667] pci 0000:00:01.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.522672] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.522679] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.522683] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.522689] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.522695] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.522703] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 0.522707] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.522714] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.522719] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.522727] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.522731] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.522738] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.522744] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.522751] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[ 0.522756] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
[ 0.522762] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff]
[ 0.522768] pci 0000:00:1c.3: bridge window [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.522776] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 0.522778] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.522784] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.522789] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.522806] alloc irq_desc for 16 on node -1
[ 0.522810] alloc kstat_irqs on node -1
[ 0.522818] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.522823] pci 0000:00:01.0: setting latency timer to 64
[ 0.522834] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.522839] alloc irq_desc for 17 on node -1
[ 0.522841] alloc kstat_irqs on node -1
[ 0.522847] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.522854] pci 0000:00:1c.0: setting latency timer to 64
[ 0.522865] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.522870] pci 0000:00:1c.1: setting latency timer to 64
[ 0.522880] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.522885] alloc irq_desc for 18 on node -1
[ 0.522887] alloc kstat_irqs on node -1
[ 0.522892] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.522899] pci 0000:00:1c.2: setting latency timer to 64
[ 0.522909] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.522913] alloc irq_desc for 19 on node -1
[ 0.522916] alloc kstat_irqs on node -1
[ 0.522921] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.522927] pci 0000:00:1c.3: setting latency timer to 64
[ 0.522936] pci 0000:00:1e.0: setting latency timer to 64
[ 0.522942] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.522946] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.522949] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.522953] pci_bus 0000:01: resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.522956] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.522960] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.522964] pci_bus 0000:03: resource 1 [mem 0x40000000-0x401fffff]
[ 0.522974] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.522978] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.522981] pci_bus 0000:05: resource 1 [mem 0xf8200000-0xf82fffff]
[ 0.522984] pci_bus 0000:05: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.522988] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.522991] pci_bus 0000:07: resource 1 [mem 0x40600000-0x407fffff]
[ 0.522995] pci_bus 0000:07: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.522998] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff]
[ 0.523001] pci_bus 0000:09: resource 1 [mem 0x40a00000-0x40bfffff]
[ 0.523005] pci_bus 0000:09: resource 2 [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.523008] pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
[ 0.523012] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.523097] NET: Registered protocol family 2
[ 0.523213] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.523630] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.524182] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.524471] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.524475] TCP reno registered
[ 0.524480] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.524491] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.524669] NET: Registered protocol family 1
[ 1.624012] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.624046] pci 0000:01:00.0: Boot video device
[ 1.624058] PCI: CLS 32 bytes, default 64
[ 1.624132] Simple Boot Flag at 0x69 set to 0x1
[ 1.624495] Scanning for low memory corruption every 60 seconds
[ 1.624677] audit: initializing netlink socket (disabled)
[ 1.624693] type=2000 audit(1290857384.624:1): initialized
[ 1.637582] highmem bounce pool size: 64 pages
[ 1.637591] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.639265] VFS: Disk quotas dquot_6.5.2
[ 1.639309] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.639503] msgmni has been set to 427
[ 1.641303] alg: No test for stdrng (krng)
[ 1.641346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.641351] io scheduler noop registered
[ 1.641354] io scheduler deadline registered
[ 1.641379] io scheduler cfq registered (default)
[ 1.641663] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.641699] alloc irq_desc for 24 on node -1
[ 1.641702] alloc kstat_irqs on node -1
[ 1.641714] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.641780] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.641819] alloc irq_desc for 25 on node -1
[ 1.641822] alloc kstat_irqs on node -1
[ 1.641831] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.641921] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.641960] alloc irq_desc for 26 on node -1
[ 1.641963] alloc kstat_irqs on node -1
[ 1.641972] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.642063] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.642102] alloc irq_desc for 27 on node -1
[ 1.642105] alloc kstat_irqs on node -1
[ 1.642114] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.642203] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.642242] alloc irq_desc for 28 on node -1
[ 1.642245] alloc kstat_irqs on node -1
[ 1.642264] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 1.642408] pci-stub: invalid id string ""
[ 1.643685] vesafb: framebuffer at 0xf0000000, mapped to 0xf7a80000, using 5120k, total 131072k
[ 1.643690] vesafb: mode is 1280x1024x16, linelength=2560, pages=50
[ 1.643693] vesafb: protected mode interface info at c000:5721
[ 1.643696] vesafb: pmi: set display start = c00c57b5, set palette = c00c5801
[ 1.643698] vesafb: pmi: ports = 4010 4016 4054 4038 403c 405c 4000 4004 40b0 40b2 40b4
[ 1.643711] vesafb: scrolling: redraw
[ 1.643715] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.644347] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 1.644353] bootsplash: silentjpeg size 189087 bytes
[ 1.669207] bootsplash: ...found (1280x1024, 95355 bytes, v3).
[ 1.669583] bootsplash: silentjpeg size 200657 bytes
[ 1.787827] Console: switching to colour frame buffer device 156x60
[ 1.873722] fb0: VESA VGA frame buffer device
[ 1.876315] Non-volatile memory driver v1.3
[ 1.876319] Linux agpgart interface v0.103
[ 1.876359] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.876477] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.877177] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.877414] ata_piix 0000:00:1f.1: version 2.13
[ 1.877433] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.877485] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.877583] scsi0 : ata_piix
[ 1.877702] scsi1 : ata_piix
[ 1.878717] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3400 irq 14
[ 1.878722] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3408 irq 15
[ 1.878751] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.878758] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.878931] ata2: port disabled. ignoring.
[ 2.029025] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.029140] scsi2 : ata_piix
[ 2.029228] scsi3 : ata_piix
[ 2.030706] ata3: SATA max UDMA/133 cmd 0x3430 ctl 0x3424 bmdma 0x3410 irq 19
[ 2.030710] ata4: SATA max UDMA/133 cmd 0x3428 ctl 0x3420 bmdma 0x3418 irq 19
[ 2.030796] Fixed MDIO Bus: probed
[ 2.030804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.030832] alloc irq_desc for 23 on node -1
[ 2.030836] alloc kstat_irqs on node -1
[ 2.030845] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.030865] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.030869] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.030901] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.030926] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.034805] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.034824] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8004000
[ 2.044015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.044049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.044053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.044056] usb usb1: Product: EHCI Host Controller
[ 2.044059] usb usb1: Manufacturer: Linux 2.6.34.7-0.5-desktop ehci_hcd
[ 2.044062] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.044222] hub 1-0:1.0: USB hub found
[ 2.044231] hub 1-0:1.0: 8 ports detected
[ 2.044353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.044375] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.044418] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.044427] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.044432] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.044446] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.044475] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[ 2.044526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.044530] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.044533] usb usb2: Product: UHCI Host Controller
[ 2.044536] usb usb2: Manufacturer: Linux 2.6.34.7-0.5-desktop uhci_hcd
[ 2.044539] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.044669] hub 2-0:1.0: USB hub found
[ 2.044675] hub 2-0:1.0: 2 ports detected
[ 2.044764] alloc irq_desc for 22 on node -1
[ 2.044767] alloc kstat_irqs on node -1
[ 2.044774] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.044783] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.044788] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.044798] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.044836] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002400
[ 2.044883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.044887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.044890] usb usb3: Product: UHCI Host Controller
[ 2.044893] usb usb3: Manufacturer: Linux 2.6.34.7-0.5-desktop uhci_hcd
[ 2.044896] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.045024] hub 3-0:1.0: USB hub found
[ 2.045032] hub 3-0:1.0: 2 ports detected
[ 2.045116] alloc irq_desc for 21 on node -1
[ 2.045119] alloc kstat_irqs on node -1
[ 2.045126] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.045135] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.045139] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.045150] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.045186] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002800
[ 2.045232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.045236] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.045239] usb usb4: Product: UHCI Host Controller
[ 2.045242] usb usb4: Manufacturer: Linux 2.6.34.7-0.5-desktop uhci_hcd
[ 2.045245] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.045381] hub 4-0:1.0: USB hub found
[ 2.045387] hub 4-0:1.0: 2 ports detected
[ 2.045471] alloc irq_desc for 20 on node -1
[ 2.045474] alloc kstat_irqs on node -1
[ 2.045481] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.045489] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.045494] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.045504] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.045542] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002c00
[ 2.045590] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.045594] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.045597] usb usb5: Product: UHCI Host Controller
[ 2.045600] usb usb5: Manufacturer: Linux 2.6.34.7-0.5-desktop uhci_hcd
[ 2.045603] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.045732] hub 5-0:1.0: USB hub found
[ 2.045738] hub 5-0:1.0: 2 ports detected
[ 2.045834] Initializing USB Mass Storage driver...
[ 2.045884] usbcore: registered new interface driver usb-storage
[ 2.045887] USB Mass Storage support registered.
[ 2.045908] usbcore: registered new interface driver ums-alauda
[ 2.045928] usbcore: registered new interface driver ums-cypress
[ 2.045950] usbcore: registered new interface driver ums-datafab
[ 2.045970] usbcore: registered new interface driver ums-freecom
[ 2.045989] usbcore: registered new interface driver ums-isd200
[ 2.046010] usbcore: registered new interface driver ums-jumpshot
[ 2.046029] usbcore: registered new interface driver ums-karma
[ 2.046047] usbcore: registered new interface driver ums-onetouch
[ 2.046068] usbcore: registered new interface driver ums-sddr09
[ 2.046090] usbcore: registered new interface driver ums-sddr55
[ 2.046112] usbcore: registered new interface driver ums-usbat
[ 2.046183] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.048978] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.048989] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.049161] mice: PS/2 mouse device common for all mice
[ 2.049300] rtc_cmos 00:05: RTC can wake from S4
[ 2.049363] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.049394] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.049414] cpuidle: using governor ladder
[ 2.049417] cpuidle: using governor menu
[ 2.049845] usbcore: registered new interface driver hiddev
[ 2.049868] usbcore: registered new interface driver usbhid
[ 2.049870] usbhid: USB HID core driver
[ 2.074800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.212517] ata3.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7
[ 2.212522] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.248892] psmouse serio1: ID: 00 00 3c
[ 2.250537] ata3.00: configured for UDMA/133
[ 2.250683] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5
[ 2.250920] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.251004] sd 2:0:0:0: [sda] Write Protect is off
[ 2.251008] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.251044] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.266323] TCP cubic registered
[ 2.266411] NET: Registered protocol family 10
[ 2.267041] lo: Disabled Privacy Extensions
[ 2.267505] lib80211: common routines for IEEE802.11 drivers
[ 2.267509] lib80211_crypt: registered algorithm 'NULL'
[ 2.267528] Using IPI No-Shortcut mode
[ 2.267648] PM: Checking image partition /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJ1UL615293-part1
[ 2.267813] sda: sda1 sda2 sda3
[ 2.278921] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.163924] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[ 3.166981] PM: Resume from disk failed.
[ 3.167009] registered taskstats version 1
[ 3.167313] Magic number: 2:153:480
[ 3.167399] rtc_cmos 00:05: setting system clock to 2010-11-27 11:29:47 UTC (1290857387)
[ 3.167576] Freeing unused kernel memory: 424k freed
[ 3.167844] Write protecting the kernel text: 4444k
[ 3.167981] Write protecting the kernel read-only data: 2980k
[ 3.253227] udev: starting version 157
[ 3.438542] [drm] Initialized drm 1.1.0 20060810
[ 3.486803] [drm] radeon defaulting to kernel modesetting.
[ 3.486808] [drm] radeon kernel modesetting enabled.
[ 3.486874] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.486881] radeon 0000:01:00.0: setting latency timer to 64
[ 3.489105] [drm] initializing kernel modesetting (RV380 0x1002:0x5B64).
[ 3.490301] [drm] register mmio base: 0xF8100000
[ 3.490305] [drm] register mmio size: 65536
[ 3.491160] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 3.491168] [drm] 1 Power State(s)
[ 3.491171] [drm] State 0 Default (default)
[ 3.491173] [drm] 16 PCIE Lanes
[ 3.491175] [drm] 1 Clock Mode(s)
[ 3.491178] [drm] 0 engine/memory: 391000/196000
[ 3.491190] [drm] radeon: power management initialized
[ 3.491195] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.491201] radeon 0000:01:00.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (128M used)
[ 3.491205] radeon 0000:01:00.0: GTT: 512M 0xD0000000 - 0xEFFFFFFF
[ 3.491263] alloc irq_desc for 29 on node -1
[ 3.491267] alloc kstat_irqs on node -1
[ 3.491282] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 3.491289] radeon 0000:01:00.0: radeon: using MSI.
[ 3.491321] [drm] radeon: irq initialized.
[ 3.491721] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.491727] [drm] RAM width 128bits DDR
[ 3.491824] [TTM] Zone kernel: Available graphics memory: 438288 kiB.
[ 3.491828] [TTM] Zone highmem: Available graphics memory: 506324 kiB.
[ 3.491848] [drm] radeon: 128M of VRAM memory ready
[ 3.491851] [drm] radeon: 512M of GTT memory ready.
[ 3.491872] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.493172] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 3.494997] [drm] PCIE GART of 512M enabled (table at 0xF0040000).
[ 3.495019] [drm] radeon: cp idle (0x10000C03)
[ 3.495532] [drm] Loading R300 Microcode
[ 3.495539] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 3.497977] [drm] radeon: ring at 0x00000000D0000000
[ 3.497999] [drm] ring test succeeded in 1 usecs
[ 3.498223] [drm] radeon: ib pool ready.
[ 3.498355] [drm] ib test succeeded in 0 usecs
[ 3.498486] [drm] DFP table revision: 4
[ 3.498547] [drm] Radeon Display Connectors
[ 3.498550] [drm] Connector 0:
[ 3.498552] [drm] VGA
[ 3.498556] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.498558] [drm] Encoders:
[ 3.498560] [drm] CRT1: INTERNAL_DAC1
[ 3.498563] [drm] Connector 1:
[ 3.498565] [drm] DVI-I
[ 3.498567] [drm] HPD1
[ 3.498570] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.498572] [drm] Encoders:
[ 3.498574] [drm] CRT2: INTERNAL_DAC2
[ 3.498577] [drm] DFP1: INTERNAL_TMDS1
[ 3.629600] [drm] fb mappable at 0xF00C0000
[ 3.629605] [drm] vram apper at 0xF0000000
[ 3.629607] [drm] size 7056000
[ 3.629610] [drm] fb depth is 24
[ 3.629612] [drm] pitch is 6720
[ 3.629619] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 3.629749] Console: switching to colour dummy device 80x25
[ 3.763765] Console: switching to colour frame buffer device 206x61
[ 3.785480] fb0: radeondrmfb frame buffer device
[ 3.785485] registered panic notifier
[ 3.785494] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[ 3.874934] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.874942] PM: Basic memory bitmaps created
[ 3.882867] PM: Basic memory bitmaps freed
[ 3.903443] PM: Starting manual resume from disk
[ 3.903448] PM: Resume from partition 8:1
[ 3.903450] PM: Checking hibernation image.
[ 3.903679] PM: Error -22 checking image file
[ 3.903682] PM: Resume from disk failed.
[ 4.572542] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 6.009046] preloadtrace: systemtap: 1.1/0.147, base: f8ae4000, memory: 24data/38text/12ctx/13net/268alloc kb, probes: 34
[ 7.034739] udev: starting version 157
[ 7.143679] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.143751] ACPI: Power Button [PWRB]
[ 7.143850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.143894] ACPI: Power Button [PWRF]
[ 7.252421] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.254133] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.294198] tg3.c:v3.108 (February 17, 2010)
[ 7.294222] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.294235] tg3 0000:05:00.0: setting latency timer to 64
[ 7.294407] intel_rng: FWH not detected
[ 7.315695] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:30:05:ca:66:1a
[ 7.315702] tg3 0000:05:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 7.315707] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 7.315711] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 7.347140] iTCO_vendor_support: vendor-support=0
[ 7.351548] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.357107] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 7.357242] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf060)
[ 7.358212] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.417860] parport_pc 00:0b: reported by Plug and Play ACPI
[ 7.417893] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 7.427544] leds_ss4200: no LED devices found
[ 7.427709] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.427774] alloc irq_desc for 30 on node -1
[ 7.427778] alloc kstat_irqs on node -1
[ 7.427794] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 7.427830] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.538951] ppdev: user-space parallel port driver
[ 7.548852] ALSA patch_realtek.c:6754: hda_codec: ALC260: BIOS auto-probing.
[ 7.548862] ALSA hda_codec.c:4385: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
[ 7.548868] ALSA hda_codec.c:4389: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.548874] ALSA hda_codec.c:4393: hp_outs=2 (0x11/0x15/0x0/0x0/0x0)
[ 7.548879] ALSA hda_codec.c:4394: mono: mono_out=0x0
[ 7.548883] ALSA hda_codec.c:4405: inputs: mic=0x12, fmic=0x13, line=0x14, fline=0x0, cd=0x16, aux=0x0
[ 7.550149] ALSA patch_realtek.c:1303: realtek: Enabling init ASM_ID=0x8601 CODEC_ID=10ec0260
[ 10.421025] floppy0: no floppy controllers found
[ 12.185570] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k
[ 13.067393] device-mapper: uevent: version 1.0.3
[ 13.067595] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 14.881114] loop: module loaded
[ 19.093798] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 20.496567] type=1505 audit(1290857404.828:2): operation="profile_load" pid=1059 name=/bin/ping
[ 20.556095] type=1505 audit(1290857404.888:3): operation="profile_load" pid=1060 name=/sbin/klogd
[ 20.667482] type=1505 audit(1290857404.999:4): operation="profile_load" pid=1061 name=/sbin/syslog-ng
[ 20.779401] type=1505 audit(1290857405.111:5): operation="profile_load" pid=1062 name=/sbin/syslogd
[ 20.901482] type=1505 audit(1290857405.233:6): operation="profile_load" pid=1063 name=/usr/sbin/avahi-daemon
[ 21.003055] type=1505 audit(1290857405.335:7): operation="profile_load" pid=1064 name=/usr/sbin/identd
[ 21.115039] type=1505 audit(1290857405.447:8): operation="profile_load" pid=1065 name=/usr/sbin/mdnsd
[ 21.245450] type=1505 audit(1290857405.577:9): operation="profile_load" pid=1066 name=/usr/sbin/nscd
[ 21.429427] type=1505 audit(1290857405.761:10): operation="profile_load" pid=1067 name=/usr/sbin/ntpd
[ 21.528502] type=1505 audit(1290857405.860:11): operation="profile_load" pid=1068 name=/usr/sbin/traceroute
[ 21.823855] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.826292] powernow: This module only works with AMD K7 CPUs
[ 21.869725] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.900992] nf_conntrack version 0.5.0 (15822 buckets, 63288 max)
[ 23.753235] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.852880] NET: Registered protocol family 17
[ 25.422029] tg3 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 25.422035] tg3 0000:05:00.0: eth0: Flow control is on for TX and on for RX
[ 25.422193] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.112717] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 33.413530] [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
[ 36.202008] eth0: no IPv6 routers present
iris@linux-dhc0:~>
 
[ 33.413530] [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
Zum Vergrößern anklicken....
*ERROR* (was auch immer dies bedeutet)

Du hast offenbar eine Radeon Grafik -- da bin ich ohne Erfahrung -- muss daher passen.

Du hast (so ich mich nicht irre) auch eine Webcam -- bin ich ebenfalls ohne Erfahrung.

So oder so vermute ich ein Grafik Problem. Bitte poste noch die Ausgabe von (als root in der Konsole):

Code: 
# hwinfo --gfxcard
sowie ein Listing der Datei "xorg.conf"

Code: 
> cat /etc/X11/xorg.conf
Vielleicht/hoffentlich meldet sich ein ATI/AMD Experte

Roland
 
Die Radeons können nicht mit den Kernelmodesettings arbeiten. D.h. dass du KMS deaaktivieren musst. Das kannst du wie folgt machen:
Code: 
echo options radeon modeset=0 > /etc/modprobe.d/radeon-kms.conf
 
Danke Euch beiden!
Z.Z. läuft das Teil ohne Probleme. Gemacht habe ich noch nichts.
Ist das Zufall?
Soll ich trozdem KMS deaktivieren? Oder erst, wenn/falls es wieder Probleme gibt?

MfG AusEssen
 
spoensche schrieb:
Die Radeons können nicht mit den Kernelmodesettings arbeiten.
Zum Vergrößern anklicken....
Wie kommst Du darauf? radeon ohne KMS ist nicht wirklich brauchbar (und funktioniert mit KMS prächtig).

AusEssen schrieb:
Soll ich trozdem KMS deaktivieren?
Zum Vergrößern anklicken....
Das sollst Du nicht tun. Wenn Du fglrx nicht installiert hast und bei Dir eine Datei /etc/X11/xorg.conf existiert, dann benenne sie um. Wenn das Problem wieder auftritt, sichere sofort nach dem Neustart die Dateien /var/log/boot.omsg und /var/log/Xorg.0.log.old, eventuell ist da etwas zu erkennen. Außerdem solltst Du dann die Ausgabe von
Code: 
/usr/sbin/hwinfo --gfxcard
cat /boot/grub/menu.lst
ebenso liefern wie aus der Datei /var/log/messages die letzten Zeilen vor dem Neustart.

AusEssen schrieb:
[ 33.413530] [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
Zum Vergrößern anklicken....
Der Bildschirm gibt seine Fähigkeiten nicht oder fehlerhaft bekannt. Paßt die Auflösung trotzdem?
 
Vielen Dank an alle!
Ich habe mir die Tipps und Hilfen gut gesichert!
Mal schauen, wann die Kiste wieder spinnt.

MfG AusEssen
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben