Code:
eth0 Protokoll:Ethernet Hardware Adresse 00:80:5A:32:27:87
inet Adresse:192.168.182.21 Bcast:192.168.182.255 Maske:255.255.255.0
inet6 Adresse: fe80::280:5aff:fe32:2787/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11482 errors:0 dropped:0 overruns:0 frame:0
TX packets:9688 errors:208 dropped:208 overruns:0 carrier:0
Kollisionen:1350 Sendewarteschlangenlänge:1000
RX bytes:4769240 (4.5 Mb) TX bytes:815500 (796.3 Kb)
Interrupt:10 Basisadresse:0x1000
eth1 Protokoll:Ethernet Hardware Adresse 00:0B:6A:16:0C:7A
inet6 Adresse: fe80::20b:6aff:fe16:c7a/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:1145 (1.1 Kb)
Interrupt:11 Basisadresse:0xdc00
eth1:eth1 Protokoll:Ethernet Hardware Adresse 00:0B:6A:16:0C:7A
inet Adresse:192.168.181.21 Bcast:192.168.181.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:11 Basisadresse:0xdc00
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:66 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:6181 (6.0 Kb) TX bytes:6181 (6.0 Kb)
Code:
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.182.0 * 255.255.255.0 U 0 0 0 eth0
192.168.181.0 192.168.181.1 255.255.255.0 UG 0 0 0 eth1
link-local * 255.255.0.0 U 0 0 0 eth1
loopback * 255.0.0.0 U 0 0 0 lo
default fritz.slwlan.bo 0.0.0.0 UG 0 0 0 eth0
Code:
192.168.181.0 192.168.181.1 255.255.255.0 UG 0 0 0 eth1
Code:
linux:/ # SuSEfirewall2 status
Chain INPUT (policy ACCEPT 8 packets, 681 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 8 packets, 496 bytes)
pkts bytes target prot opt in out source destination
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
192.168.181.2: Server unter Linux 8.2
### hierzwischen LAN ###
192.168.182.21: mein Rechner per LAN (eth1)
192.168.182.21: mein Rechner per WLAN (eth0)
### hierzwischen WLAN ###
192.168.182.1: DSL-Router
Netzwerk 192.168.181.0: LAN über Switch
Netzwerk 192.168.182.0: WLAN über WLAN-Karte in meinem Rechner (192.168.182.21)
von meinem Rechner (192.168.182.1 bzw 192.168.181.21) Ping zu
192.168.182.1 (DSL-Router über WLAN) möglich
192.168.181.2 (Server über LAN) nicht möglich (Destination Host Unreachable)
Was ich möchte, ist, dass ich
a) auf das Netzwerk 192.168.181.0 zugreifen kann
b) der Rechner 192.168.181.10 (über LAN, Windows XP) über LAN (eth1) auf meinen Rechner zugreifen kann und dieser dessen Anfragen routet nach 192.168.182.1 (DSL-Router), damit ich ins Internet komme.
Kann mir jemand helfen? Ich sitze hier schon seit gestern Abend dran und probieren und stelle um, aber nichts hilft *langsamratlosist*
Gruß,
Lars