• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Scanner Mustek Bearpaw 1200 scannt falsch?

A

Anonymous

Gast
Wißt ihr, was mich total annervt: Ich hab einen Mustek Bearpaw 1200 Scanner, der angeblich auch unter Linux funktionieren soll, es aber nicht tut. Er hängt an USB und scannt auch, aber ganz komisch. So als, wenn der blaue Farbkanal komplett weg ist oder so. Mir würde es ja schon reichen, wenn ich wenigstens in Graustufen halbwegs scannen könnte, aber schwarzer Text ist nahezu unsichtbar nach dem scannen. Gelb und Rot kann ich ganz gut sehen nach dem einscannen, aber das war es dann auch schon.

Ich hab schon in sane, xsane und kooka alles mögliche rumprobiert und auch mal nach der Firmware bei sane geschaut, aber direkt zu meinem Bearpaw gitbs da keine nur zu "Bearpaw 1200 und irgendwelche Buchstaben hinten dran".

Das ist ganz schön nervig, sag ich euch. Unter Windows scannt der ohne Probleme:-(

spunti
 

misiu

Moderator
Teammitglied
spunti schrieb:
Wißt ihr, was mich total annervt: Ich hab einen Mustek Bearpaw 1200 Scanner, der angeblich auch unter Linux funktionieren soll, es aber nicht tut. Er hängt an USB und scannt auch, aber ganz komisch. So als, wenn der blaue Farbkanal komplett weg ist oder so. Mir würde es ja schon reichen, wenn ich wenigstens in Graustufen halbwegs scannen könnte, aber schwarzer Text ist nahezu unsichtbar nach dem scannen. Gelb und Rot kann ich ganz gut sehen nach dem einscannen, aber das war es dann auch schon.

Ich hab schon in sane, xsane und kooka alles mögliche rumprobiert und auch mal nach der Firmware bei sane geschaut, aber direkt zu meinem Bearpaw gitbs da keine nur zu "Bearpaw 1200 und irgendwelche Buchstaben hinten dran".

Das ist ganz schön nervig, sag ich euch. Unter Windows scannt der ohne Probleme:-(

spunti

Versuche direkt mit der Konfigurationsdatei
in /etc/sane.d/
Zuerst wird dein Backend frei geschaltet in
/etc/sane.d/dll.conf
dann die Beschreibungdatei verändern
(der Mustek Bearpaw ist mit Plustek gleich)
/etc/sane.d/plustek.conf
und wie, must du selber rausfinden.
("man sane-plustek" in Konsole")
MfG
misiu
Infos:
http://www.gjaeger.de/scanner/howtos/InstallationsanweisungDe/InstallationsanweisungDe.html
und
http://www.gjaeger.de/scanner/howtos/Installationsanweisung.txt
 

spunti

Hacker
Ich hab jetzt auch mal direkt in plustek.conf "rumprobiert" und werte verändert. Aber das scheint gar keine Auwirkungen zu haben. In dll.conf ist plustek aber aktiviert und ich starte sogar schon sane neu und melde mich als benutzer neu an.

ich glaube, der beachtet den file nicht wirklich.

spunti
 
Hi,

spunti schrieb:
Ich hab jetzt auch mal direkt in plustek.conf "rumprobiert" und werte verändert. Aber das scheint gar keine Auwirkungen zu haben. In dll.conf ist plustek aber aktiviert und ich starte sogar schon sane neu und melde mich als benutzer neu an.

ich glaube, der beachtet den file nicht wirklich.

spunti

hol Dir mal die aktuellsten SANE-Quellen und versuch es damit.
Bei den BearPaw Geräten gibt es immer wieder Ärger bei der
Autodetection, von dem her kann es sein, dass in deinem Gerät eine
HW werkelt, die "falsch" erkannt wird. Bei meinem BearPaw hier
gibt es keine Probleme...

Grüsse,
Gerhard
 

spunti

Hacker
Ich hab jetzt noch mal das neueste Sane-backend installiert und damit funktioniert es auch nicht. Ich kann nur jedem raten, kein Bearpaw 1200 zu kaufen zumindest einige davon funktionieren nur mit Windows. Rote Schrift kann ich prima scannen, aber schwarz ist fast unsichtbar - wahrscheinlich ist der Blau-Kanal "tot" unter Linux.

Ich werde mir demnächst einen neuen Scanner kaufen und dann gleich zurückschicken wenn er nicht funktioniert. Mustek kommt mir aber nicht mehr ins Haus.
 

misiu

Moderator
Teammitglied
spunti schrieb:
Ich hab jetzt noch mal das neueste Sane-backend installiert und damit funktioniert es auch nicht. Ich kann nur jedem raten, kein Bearpaw 1200 zu kaufen zumindest einige davon funktionieren nur mit Windows. Rote Schrift kann ich prima scannen, aber schwarz ist fast unsichtbar - wahrscheinlich ist der Blau-Kanal "tot" unter Linux.

Ich werde mir demnächst einen neuen Scanner kaufen und dann gleich zurückschicken wenn er nicht funktioniert. Mustek kommt mir aber nicht mehr ins Haus.

Da steht noch einiges:
http://www.meier-geinitz.de/sane/gt68xx-backend/index_de.html
und
http://home.t-online.de/home/red-des/sane/

Tust du die Windows-Firmware benutzen?

MfG
misiu
 
OP
A

Anonymous

Gast
Die Win-Firmware benutz ich nicht, weil ich die unter Windows2000 nicht finde. Da gibts nirgends eine .usb-datei vom installierten scanner.
In der sane-tabelle ist mein der bearpaw1200 (ohne irgendwelche Buchstaben hintendran) nicht dabei. die mit den buchstaben hatte ich aber auch schon ausprobiert. Im moment wird wohl das plustek-modul benutzt
 

misiu

Moderator
Teammitglied
spunti2 schrieb:
Die Win-Firmware benutz ich nicht, weil ich die unter Windows2000 nicht finde. Da gibts nirgends eine .usb-datei vom installierten scanner.
In der sane-tabelle ist mein der bearpaw1200 (ohne irgendwelche Buchstaben hintendran) nicht dabei. die mit den buchstaben hatte ich aber auch schon ausprobiert. Im moment wird wohl das plustek-modul benutzt

Die Firmware kannst du auch hier runterladen:
http://www.meier-geinitz.de/sane/gt68xx-backend/index.html#STATUS
(In der Tabelle must du deinen Scanner wählen)
Dann brauchst du auch neue Sane-Version mit dem
"gt68xx-backend", für SuSE zB hier:
http://packman.links2linux.de/?action=index

Mein Scanner (AGFA) läuft auch mit der Windows-Firmware
Die ist meistens auch auf der Herstellerhomepage zu finden.
MfG
misiu
 
OP
A

Anonymous

Gast
Hi,

spunti schrieb:
Ich hab jetzt noch mal das neueste Sane-backend installiert und damit funktioniert es auch nicht. Ich kann nur jedem raten, kein Bearpaw 1200 zu kaufen zumindest einige davon funktionieren nur mit Windows. Rote Schrift kann ich prima scannen, aber schwarz ist fast unsichtbar - wahrscheinlich ist der Blau-Kanal "tot" unter Linux.

schau Dir mal die Man-Page sane-plustek genauer an, es gibt
anscheinend von Mustek 2 unterschiedliche Scanner, die jedoch
immer BearPaw 1200 heissen. Das Problem daran ist, dass der
Unterschied nicht automatisch detektiert werden kann.
In der plustek.conf solltest Du als Option:
option mov 1
eintragen, dann sollte der Scanner funktionieren...

Eine Firmware braucht der BearPaw nicht, da er auf den
National Semiconductor MERLIN Chipsatz aufbaut...

Hoffe der Hinweis hilft Dir weiter.
Grüsse,
Gerhard

PS.: Ich geb Dir recht eine solche Modell-Politik sollte man nicht
unterstützen, zum Mustek nur die Referenzdesigns von National
kopiert hat...
 
OP
A

Anonymous

Gast
Anonymous schrieb:
...
schau Dir mal die Man-Page sane-plustek genauer an, es gibt
anscheinend von Mustek 2 unterschiedliche Scanner, die jedoch
immer BearPaw 1200 heissen. Das Problem daran ist, dass der
Unterschied nicht automatisch detektiert werden kann.
In der plustek.conf solltest Du als Option:
option mov 1
eintragen, dann sollte der Scanner funktionieren...

eins hab ich noch vergessen, falls Du mit den Hinweisen nicht
klar kommst, solltest Du Dich vielleicht direkt an die SANE
Liste wenden (www.sane-project.org).

Grüsse,
Gerhard
 

spunti

Hacker
...auf jeden Fall ein heißer Tip mit dem option mov 1, aber damit wird mein scanner nicht mehr erkannt.mit
(Na wenigstens weiß ich jetzt, daß der auch tatsächlich die plustek.conf benutzt, wenn ich da drin was ändere.)
 
spunti schrieb:
...auf jeden Fall ein heißer Tip mit dem option mov 1, aber damit wird mein scanner nicht mehr erkannt.mit
(Na wenigstens weiß ich jetzt, daß der auch tatsächlich die plustek.conf benutzt, wenn ich da drin was ändere.)

Hmmm, dann ist vielleicht noch was faul im Plustek-Backend. Ich hab
leider keinen dieser seltsamen BearPaws hier. Probier mal

export SANE_DEBUG_PLUSTEK=20 ; scanimage > /dev/null

Die Ausgaben schick mal hierher, ich schau's mir mal an.

Grüsse,
Gerhard
 

spunti

Hacker
spunti@Wohnheim:~> export SANE_DEBUG_PLUSTEK=20 ; scanimage > /dev/null
[sanei_debug] Setting debug level of plustek to 20.
[plustek] Plustek backend V0.47-11, part of sane-backends 1.0.14
[plustek] ># Plustek-SANE Backend configuration file<
[plustek] ># For use with LM9831/2/3 based USB scanners<
[plustek] >#<
[plustek] ><
[plustek] ># each device needs at least two lines:<
[plustek] ># - [usb] vendor-ID and product-ID<
[plustek] ># - device devicename<
[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device /dev/usbscanner<
[plustek] ># or<
[plustek] ># device libusb:bbb:ddd<
[plustek] ># where bbb is the busnumber and ddd the device number<
[plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd<
[plustek] >#<
[plustek] ># additionally you can specify some options<
[plustek] ># warmup, lOffOnEnd, lampOff<
[plustek] >#<
[plustek] ># For autodetection use<
[plustek] ># [usb]<
[plustek] ># device /dev/usbscanner<
[plustek] >#<
[plustek] ># or simply<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># or if you want a specific device but you have no idea about the<
[plustek] ># device node or you use libusb, simply set vendor- and product-ID<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device auto<
[plustek] >#<
[plustek] ># NOTE: autodetection is safe, as it uses the info it got<
[plustek] ># from the USB subsystem. If you're not using the<
[plustek] ># autodetection, you MUST have attached that device<
[plustek] ># at your USB-port, that you have specified...<
[plustek] >#<
[plustek] ><
[plustek] >[usb]<
[plustek] next device uses autodetection
[plustek] ... next device
[plustek] ><
[plustek] ><
[plustek] ><
[plustek] >#<
[plustek] ># options for the previous USB entry<
[plustek] >#<
[plustek] ># switch lamp off after xxx secs, 0 disables the feature<
[plustek] >option lampOff 300<
[plustek] Decoding option >lampOff<
[plustek] ><
[plustek] ># warmup period in seconds, 0 means no warmup<
[plustek] >option warmup 15<
[plustek] Decoding option >warmup<
[plustek] ><
[plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<
[plustek] ># on sane_close<
[plustek] >option lOffOnEnd 1<
[plustek] Decoding option >lOffOnEnd<
[plustek] ><
[plustek] >#<
[plustek] ># options to tweak the image start-position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] >#<
[plustek] ># for the normal scan area<
[plustek] >#<
[plustek] >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] ><
[plustek] ># for transparencies<
[plustek] >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] ><
[plustek] ># for negatives<
[plustek] >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] ><
[plustek] >#<
[plustek] ># for setting the calibration strip position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] ># -1 means use built in<
[plustek] >#<
[plustek] >option posShadingY -1<
[plustek] Decoding option >posShadingY<
[plustek] >option tpaShadingY -1<
[plustek] Decoding option >tpaShadingY<
[plustek] >option negShadingY -1<
[plustek] Decoding option >negShadingY<
[plustek] ><
[plustek] >#<
[plustek] ># to invert the negatives, 0 disables the feature<
[plustek] >#<
[plustek] >option invertNegatives 0<
[plustek] Decoding option >invertNegatives<
[plustek] ><
[plustek] >#<
[plustek] ># to save/restore coarse calibration data<
[plustek] >#<
[plustek] >option cacheCalData 0<
[plustek] Decoding option >cacheCalData<
[plustek] ><
[plustek] >#<
[plustek] ># use alternate calibration routines<
[plustek] >#<
[plustek] >option altCalibration 0<
[plustek] Decoding option >altCalibration<
[plustek] ><
[plustek] ># for skipping whole calibration step<
[plustek] >option skipCalibration 0<
[plustek] Decoding option >skipCalibration<
[plustek] ><
[plustek] ># for skipping entire fine calibration step<
[plustek] ># coarse calibration is done<
[plustek] >option skipFine 0<
[plustek] Decoding option >skipFine<
[plustek] ><
[plustek] ># discard the result of the fine white calibration<
[plustek] >option skipFineWhite 0<
[plustek] Decoding option >skipFineWhite<
[plustek] ><
[plustek] ># for replacing the gain values found during<
[plustek] ># calibration<
[plustek] >option red_gain -1<
[plustek] Decoding option >red_gain<
[plustek] >option green_gain -1<
[plustek] Decoding option >green_gain<
[plustek] >option blue_gain -1<
[plustek] Decoding option >blue_gain<
[plustek] ><
[plustek] >#<
[plustek] ># for adjusting the default gamma values<
[plustek] >#<
[plustek] >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] ><
[plustek] >#<
[plustek] ># to enable TPA (non Plustek devices only)<
[plustek] ># 0 means default behaviour as specified in the internal tables<
[plustek] ># 1 means enable<
[plustek] >#<
[plustek] >option enableTPA 0<
[plustek] Decoding option >enableTPA<
[plustek] ><
[plustek] >#<
[plustek] ># and of course the device-name<
[plustek] >#<
[plustek] ># device /dev/usbscanner<
[plustek] >device auto<
[plustek] Decoding device name >auto<
[plustek] >usb 0x400 0x1000<
[plustek] ignoring >usb 0x400 0x1000<
[plustek] ># soll andere firmware von mustek1200 verwenden<
[plustek] ># option mov 1<
[plustek] >#<
[plustek] ># to define a new device, start with a new section:<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># [usb]<
[plustek] >#device auto<
[plustek] >#usb 0x400 0x1001<
[plustek] ># soll andere firmware von mustek1200 verwenden<
[plustek] >#option mov 1<
[plustek] attach (auto, 0xbfff3fa0, (nil))
[plustek] Device configuration:
[plustek] device name : >auto<
[plustek] USB-ID : ><
[plustek] model ovr. : 0
[plustek] warmup : 15s
[plustek] lampOff : 300
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,)
[plustek] Autodetection...
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0016
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0007
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x0005
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0012
[plustek] Checking for 0x0400-0x1000
[plustek] Found device at >libusb:001:002<
[plustek] Vendor ID=0x0400, Product ID=0x1000
[plustek] usbio_DetectLM983x
[plustek] usbio_DetectLM983x: found LM9831
[plustek] Detected vendor & product ID: 0x0400-0x1000
[plustek] BearPaw device: 0x0400-0x1000-0 (15)
[plustek] Device description for >0x0400-0x1000-0< found.
[plustek] usb_initDev(21,0x0400,-1)
[plustek] Device WAF: 0x00000000
[plustek] Vendor adjusted to: >Mustek<
[plustek] LAMP-STATUS: 0x00000000
[plustek] RESETTING REGISTERS(-1)
[plustek] SETTING THE MISC I/Os
[plustek] MISC I/O after RESET: 0x44, 0x44, 0x4f
[plustek] Calibration file-name set to:
[plustek] >/home/ronny/.sane/Mustek-BearPaw_1200.cal<
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 4.000
[plustek] * XDPI=150, HDPI=4.000
[plustek] * YDPI=150, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=140
[plustek] >> End-Start=0, HDPI=4.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 166 (0x00a6)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 337, 0x46=0x01 0x47=0x51
[plustek] * DPD =132 (0x0084)
[plustek] * DPD =5249 (0x1481), step size=337, steps2rev=30
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=4.000)
[plustek] * Setting GreenPWMDutyCycleHigh
[plustek] * Current MCLK Divider = 4.000000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 166, [0x48] = 0x00, [0x49] = 0xa6
[plustek] * PhyBytes = 2
[plustek] * PhyLines = 2
[plustek] * TotalBytes = 4
[plustek] * PL=295, coeffsize=216, scaler=1
[plustek] * PauseLimit = 2, [0x4e] = 0x01, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usbDev_getCaps()
[plustek] Scanner information:
[plustek] Vendor : Mustek
[plustek] Model : BearPaw 1200
[plustek] Flags : 0x00000000
[plustek] drvclose()
[plustek] usbDev_stopScan()
[plustek] usbDev_ScanEnd(), start=0, park=0
[plustek] usbDev_close()
[plustek] attach: model = >BearPaw 1200<
[plustek] sane_get_devices (0xbfff60a8, 0)
[plustek] sane_open - libusb:001:002
[plustek] Presetting Gamma tables (len=4096)
[plustek] * Channel[0], gamma 1.000
[plustek] * Channel[1], gamma 1.000
[plustek] * Channel[2], gamma 1.000
[plustek] * Channel[3], gamma 1.000
[plustek] ----------------------------------
[plustek] sane_start
[plustek] usbDev_open(libusb:001:002,)
[plustek] Vendor ID=0x0400, Product ID=0x1000
[plustek] usbio_DetectLM983x
[plustek] usbio_DetectLM983x: found LM9831
[plustek] Detected vendor & product ID: 0x0400-0x1000
[plustek] BearPaw device: 0x0400-0x1000-0 (15)
[plustek] Device description for >0x0400-0x1000-0< found.
[plustek] usb_initDev(21,0x0400,21)
[plustek] Device WAF: 0x00000000
[plustek] Vendor adjusted to: >Mustek<
[plustek] LAMP-STATUS: 0x00000000
[plustek] RESETTING REGISTERS(21)
[plustek] USING MISC I/O settings
[plustek] MISC I/O after RESET: 0x44, 0x44, 0x4f
[plustek] usbDev_getCaps()
[plustek] scanmode = 3
[plustek] usbDev_getCropInfo()
[plustek] usb_GetImageInfo()
[plustek] PPL = 248
[plustek] LPA = 150
[plustek] BPL = 744
[plustek] brightness 0, contrast 0
[plustek] usbDev_setScanEnv()
[plustek] usb_SaveImageInfo()
[plustek] dwFlag = 0x00000400
[plustek] usb_GetImageInfo()
[plustek] * Preview Mode NOT set!
[plustek] Setting map[0] at 0x080637e4
[plustek] Setting map[1] at 0x080677e4
[plustek] Setting map[2] at 0x0806b7e4
[plustek] usbDev_startScan()
[plustek] * HDPI: 12.000
[plustek] * XDPI=50, HDPI=12.000
[plustek] * YDPI=150, MinDPIY=150
[plustek] LAMP-STATUS: 0x00000000
[plustek] Switching Lamp on
[plustek] Warmup-Timer started
[plustek] LAMP-STATUS: 0x00000001
[plustek] Lamp-Timer stopped
[plustek] dwflag = 0x40000400 dwBytesPerLine = 744
[plustek] TIME START
[plustek] reader_process started (forked)
[plustek] reader_process:starting to READ data (111600 bytes)
[plustek] buf = 0x0806fb10
[plustek] usbDev_PrepareScan()
[plustek] sane_start done
[plustek] usb_DoCalibration()
[plustek] goto shading position
[plustek] ShadingOriginY=20
[plustek] MotorDPI=600, MaxMoveSpeed=1.250, FFStepSize=333, Steps=40
[plustek] MOTOR: PWM=0x03, PWM_DUTY=0x20 0x45=0x13 0x48=0x01, 0x49=0x4d
[plustek] MCLK_FFW = 6 --> 0x0a
[plustek] shading position reached
[plustek] kNEC8861 adjustments
[plustek] SETMCLK[4/2], using entry 6: 11.500000, 600
[plustek] No Plustek model: 50dpi
[plustek] SETMCLK[4/2], using entry 0: 3.500000, 50
[plustek] Settings done, so start...
[plustek] ###### ADJUST GAIN (COARSE)#######
[plustek] usb_AdjustGain()
[plustek] Coarse Calibration Strip:
[plustek] Lines = 1
[plustek] Pixels = 5100
[plustek] Bytes = 30600
[plustek] Origin.X = 70
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 190 (0x00be)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 2 (HDPI=1.000,MCLKD=3.500)
[plustek] * Stepsize = 2023, 0x46=0x07 0x47=0xe7
[plustek] * DPD =369 (0x0171)
[plustek] * DPD =5012 (0x1394), step size=2023, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] * Setting GreenPWMDutyCycleHigh
[plustek] * Current MCLK Divider = 3.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 95, [0x48] = 0x00, [0x49] = 0x5f
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] Warmup: Waiting 15 seconds
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 05 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 02 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 07 e7 00 5f 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 94 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 00 25 18 51 02 06 28 48 00 03 00 00 30 00 00 02
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-0.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x1274(4724), 0x17d1(6097), 0x254d(9549)
[plustek] MIN(R,G,B)= 0x0d23(3363), 0x104e(4174), 0x1936(6454)
[plustek] CUR(R,G,B)= 0x1274(4724), 0x17d1(6097), 0x254d(9549)
[plustek] Gain internally limited! (50.000-> 31)
[plustek] Gain internally limited! (36.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 166 (0x00a6)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 2 (HDPI=1.000,MCLKD=4.000)
[plustek] * Stepsize = 2023, 0x46=0x07 0x47=0xe7
[plustek] * DPD =369 (0x0171)
[plustek] * DPD =5012 (0x1394), step size=2023, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] * Setting GreenPWMDutyCycleHigh
[plustek] * Current MCLK Divider = 4.000000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 83, [0x48] = 0x00, [0x49] = 0x53
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 06 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 02 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 07 e7 00 53 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 94 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 00 22 18 00 02 06 28 48 00 03 00 00 b0 00 00 06
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-1.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x15cd(5581), 0x1c25(7205), 0x2aa8(10920)
[plustek] MIN(R,G,B)= 0x0fce(4046), 0x1352(4946), 0x1ccb(7371)
[plustek] CUR(R,G,B)= 0x15cd(5581), 0x1c25(7205), 0x2aa8(10920)
[plustek] Gain internally limited! (40.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 148 (0x0094)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 2 (HDPI=1.000,MCLKD=4.500)
[plustek] * Stepsize = 2023, 0x46=0x07 0x47=0xe7
[plustek] * DPD =369 (0x0171)
[plustek] * DPD =5012 (0x1394), step size=2023, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 4.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 74, [0x48] = 0x00, [0x49] = 0x4a
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 07 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 02 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 07 e7 00 4a 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 94 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 00 62 18 cc 02 06 28 48 00 03 00 00 10 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-2.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x17d2(6098), 0x1f7d(8061), 0x3037(12343)
[plustek] MIN(R,G,B)= 0x119e(4510), 0x1605(5637), 0x2067(8295)
[plustek] CUR(R,G,B)= 0x17d2(6098), 0x1f7d(8061), 0x3037(12343)
[plustek] Gain internally limited! (36.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 133 (0x0085)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 2 (HDPI=1.000,MCLKD=5.000)
[plustek] * Stepsize = 2023, 0x46=0x07 0x47=0xe7
[plustek] * DPD =369 (0x0171)
[plustek] * DPD =5012 (0x1394), step size=2023, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 5.000000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 66, [0x48] = 0x00, [0x49] = 0x42
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 08 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 02 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 07 e7 00 42 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 94 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 00 65 18 b5 02 06 28 48 00 03 00 00 b0 00 00 05
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-3.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x1966(6502), 0x231d(8989), 0x33ef(13295)
[plustek] MIN(R,G,B)= 0x12b5(4789), 0x178e(6030), 0x2279(8825)
[plustek] CUR(R,G,B)= 0x1966(6502), 0x231d(8989), 0x33ef(13295)
[plustek] Gain internally limited! (32.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 121 (0x0079)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=5.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 5.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 121, [0x48] = 0x00, [0x49] = 0x79
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 09 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 79 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 22 28 79 b2 44 28 48 00 03 00 00 30 00 00 02
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-4.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x167e(5758), 0x2152(8530), 0x3463(13411)
[plustek] MIN(R,G,B)= 0x0f90(3984), 0x153a(5434), 0x217f(8575)
[plustek] CUR(R,G,B)= 0x167e(5758), 0x2152(8530), 0x3463(13411)
[plustek] Gain internally limited! (39.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 111 (0x006f)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.000000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 111, [0x48] = 0x00, [0x49] = 0x6f
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0a 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 6f 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 63 28 65 b2 44 28 48 00 03 00 00 b0 00 00 01
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-5.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x1894(6292), 0x2535(9525), 0x3977(14711)
[plustek] MIN(R,G,B)= 0x10ea(4330), 0x1804(6148), 0x23e8(9192)
[plustek] CUR(R,G,B)= 0x1894(6292), 0x2535(9525), 0x3977(14711)
[plustek] Gain internally limited! (34.000-> 31)
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 30602
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=290, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(1)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 01 01 01 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 0d 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 22 28 47 b2 44 28 48 00 03 00 00 30 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] PhyBytes = 30602
[plustek] PhyPixels = 5100
[plustek] Creating file 'coarse-gain-6.raw'
[plustek] > X=5100, Y=1, depth=16
[plustek] MAX(R,G,B)= 0x1a95(6805), 0x2939(10553), 0x3f18(16152)
[plustek] MIN(R,G,B)= 0x123c(4668), 0x1a54(6740), 0x281c(10268)
[plustek] CUR(R,G,B)= 0x1a95(6805), 0x2939(10553), 0x3f18(16152)
[plustek] REG[0x3b] = 62
[plustek] REG[0x3c] = 46
[plustek] REG[0x3d] = 36
[plustek] after tweaking:
[plustek] REG[0x3b] = 62
[plustek] REG[0x3c] = 46
[plustek] REG[0x3d] = 36
[plustek] red_lamp_on = 0
[plustek] red_lamp_off = 16383
[plustek] green_lamp_on = 0
[plustek] green_lamp_off = 0
[plustek] blue_lamp_on = 0
[plustek] blue_lamp_off = 16383
[plustek] usb_AdjustGain() done.
[plustek] ###### ADJUST OFFSET (COARSE) ####
[plustek] usb_AdjustOffset()
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 1.000
[plustek] * XDPI=600, HDPI=1.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=14, LineEnd=2564
[plustek] >> End-Start=2550, HDPI=1.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 15302
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 15302
[plustek] * PL=305, coeffsize=192, scaler=1
[plustek] * PauseLimit = 15, [0x4e] = 0x05, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] S.dwPixels = 2550
[plustek] dwPixels = 15
[plustek] dwPhyBytes = 15302
[plustek] dwPhyPixels = 2550
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(4)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 0e 0a 04 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 00 00 00 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 05 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 60 28 4e b2 44 28 48 00 03 00 00 90 00 00 05
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'coarse-off-0.raw'
[plustek] > X=2550, Y=1, depth=16
[plustek] RedSum = 294692, ave = 19646
[plustek] GreenSum = 142160, ave = 9477
[plustek] BlueSum = 119268, ave = 7951
[plustek] RedExpect = 0
[plustek] GreenExpect = 0
[plustek] BlueExpect = 0
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(4)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 0e 0a 04 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 30 30 30 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 05 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 65 28 4e b2 44 28 48 00 03 00 00 90 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'coarse-off-1.raw'
[plustek] > X=2550, Y=1, depth=16
[plustek] RedSum = 79220, ave = 5281
[plustek] GreenSum = 8756, ave = 583
[plustek] BlueSum = 29552, ave = 1970
[plustek] RedExpect = 48
[plustek] GreenExpect = 48
[plustek] BlueExpect = 48
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(4)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 0e 0a 04 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 38 28 28 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 05 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 20 28 ae b2 44 28 48 00 03 00 00 30 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'coarse-off-2.raw'
[plustek] > X=2550, Y=1, depth=16
[plustek] RedSum = 1736, ave = 115
[plustek] GreenSum = 61652, ave = 4110
[plustek] BlueSum = 68792, ave = 4586
[plustek] RedExpect = 48
[plustek] GreenExpect = 40
[plustek] BlueExpect = 40
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(4)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 0e 0a 04 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 34 2c 2c 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 05 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 63 28 5f b2 44 28 48 00 03 00 00 b0 00 00 03
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'coarse-off-3.raw'
[plustek] > X=2550, Y=1, depth=16
[plustek] RedSum = 32032, ave = 2135
[plustek] GreenSum = 29064, ave = 1937
[plustek] BlueSum = 50640, ave = 3376
[plustek] RedExpect = 48
[plustek] GreenExpect = 40
[plustek] BlueExpect = 40
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(4)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 20 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 0e 0a 04 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 32 2a 2a 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 05 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 60 28 ae b2 44 a8 48 00 03 00 00 90 00 00 06
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'coarse-off-4.raw'
[plustek] > X=2550, Y=1, depth=16
[plustek] RedSum = 51284, ave = 3418
[plustek] GreenSum = 51808, ave = 3453
[plustek] BlueSum = 59160, ave = 3944
[plustek] RedExpect = 50
[plustek] GreenExpect = 40
[plustek] BlueExpect = 42
[plustek] REG[0x38] = 50
[plustek] REG[0x39] = 40
[plustek] REG[0x3a] = 42
[plustek] usb_AdjustOffset() done.
[plustek] ###### ADJUST DARK (FINE) ########
[plustek] usb_AdjustDarkShading()
[plustek] MCLK = 6.500000 (scanparam-MCLK=6.500000)
[plustek] * HDPI: 12.000
[plustek] * XDPI=50, HDPI=12.000
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 4.000
[plustek] * XDPI=150, HDPI=4.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=4.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 7652
[plustek] * PhyLines = 1
[plustek] * TotalBytes = 7652
[plustek] * PL=312, coeffsize=192, scaler=1
[plustek] * PauseLimit = 8, [0x4e] = 0x02, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(2)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 00 00 XX XX 03 0b 24 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 00 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 32 28 2a 3e 2e 24 00 00
[plustek] 0x40: 40 00 20 00 00 03 05 45 00 66 00 00 00 00 02 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 60 28 2e b2 44 a8 48 00 03 00 00 d0 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Creating file 'fine-black.raw'
[plustek] > X=1275, Y=1, depth=16
[plustek] Color[0] (Dark) : min=59422(0) max=59422(0) ave=59422
[plustek] 5%: 56450 (0), 62393 (0)
[plustek] Color[1] (Dark) : min=39452(0) max=39452(0) ave=39452
[plustek] 5%: 37479 (0), 41424 (0)
[plustek] Color[2] (Dark) : min=58904(0) max=58904(0) ave=58904
[plustek] 5%: 55958 (0), 61849 (0)
[plustek] ###### ADJUST WHITE (FINE) #######
[plustek] * HDPI: 12.000
[plustek] * XDPI=50, HDPI=12.000
[plustek] FINE WHITE Calibration Strip: fine-white.raw
[plustek] Shad.-Lines = 64
[plustek] Lines = 32
[plustek] Pixels = 1275
[plustek] Bytes = 7650
[plustek] Origin.X = 0
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 4.000
[plustek] * XDPI=150, HDPI=4.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=4.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 7652
[plustek] * PhyLines = 32
[plustek] * TotalBytes = 244864
[plustek] * PL=312, coeffsize=192, scaler=1
[plustek] * PauseLimit = 240, [0x4e] = 0x76, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(3)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 08 00 XX XX 03 0b 24 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 32 28 2a 3e 2e 24 00 00
[plustek] 0x40: 40 00 24 00 00 13 05 45 00 66 00 00 00 00 76 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 25 28 16 b2 44 28 48 00 03 00 00 d0 00 00 05
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] TotalBytes = 244864
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] Creating file 'fine-white.raw'
[plustek] > X=1275, Y=32, depth=16
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 4.000
[plustek] * XDPI=150, HDPI=4.000
[plustek] * YDPI=600, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=5240
[plustek] >> End-Start=5100, HDPI=4.00
[plustek] * Full Steps to Skip at Start = 0x0000
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 1349, 0x46=0x05 0x47=0x45
[plustek] * DPD =270 (0x010e)
[plustek] * DPD =5111 (0x13f7), step size=1349, steps2rev=0
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 7652
[plustek] * PhyLines = 32
[plustek] * TotalBytes = 244864
[plustek] * PL=312, coeffsize=192, scaler=1
[plustek] * PauseLimit = 240, [0x4e] = 0x76, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] usb_ScanBegin()
[plustek] usb_DownloadShadingData(3)
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 81 08 00 XX XX 03 0b 24 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 14 78 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 32 28 2a 3e 2e 24 00 00
[plustek] 0x40: 40 00 24 00 00 13 05 45 00 66 00 00 00 00 76 01
[plustek] 0x50: 00 fc 13 f7 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 50 60 28 57 b2 44 28 48 00 03 00 00 d0 00 00 01
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] TotalBytes = 244864
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] usbDev_ScanEnd(), start=1, park=0
[plustek] Color[0] (White) : min=90(440) max=65376(650) ave=32814
[plustek] 5%: 31173 (353), 34454 (355)
[plustek] Color[1] (White) : min=74(157) max=65373(527) ave=34140
[plustek] 5%: 32432 (350), 35847 (364)
[plustek] Color[2] (White) : min=85(217) max=65382(21) ave=33881
[plustek] 5%: 32186 (343), 35575 (359)
[plustek] MotorDPI=600, MaxMoveSpeed=1.250, FFStepSize=333, Steps=2
[plustek] MOTOR: PWM=0x10, PWM_DUTY=0x04 0x45=0x13 0x48=0x01, 0x49=0x4d
[plustek] MCLK_FFW = 6 --> 0x0a
[plustek] MotorDPI=600, MaxMotorSpeed=1.250, FFStepSize=333
[plustek] MOTOR: PWM=0x04, PWM_DUTY=0x04 0x45=0x13 0x48=0x01, 0x49=0x4d
[plustek] MCLK_FFW = 6 --> 0x0a
[plustek] Calibration done
[plustek] -----------------------
[plustek] Static Gain:
[plustek] REG[0x3b] = 62
[plustek] REG[0x3c] = 46
[plustek] REG[0x3d] = 36
[plustek] Static Offset:
[plustek] REG[0x38] = 50
[plustek] REG[0x39] = 40
[plustek] REG[0x3a] = 42
[plustek] -----------------------
[plustek] calibration done.
[plustek] usb_SetScanParameters()
[plustek] * HDPI: 12.000
[plustek] * XDPI=50, HDPI=12.000
[plustek] * YDPI=150, MinDPIY=150
[plustek] * DataPixelStart=140, LineEnd=3116
[plustek] >> End-Start=2976, HDPI=12.00
[plustek] * Full Steps to Skip at Start = 0x0104
[plustek] * StepSize(Preset) = 102 (0x0066)
[plustek] * Scan calculations...
[plustek] * LineLength=5381, LineRateColor=1
[plustek] * Stepsize = 337, 0x46=0x01 0x47=0x51
[plustek] * DPD =132 (0x0084)
[plustek] * DPD =5249 (0x1481), step size=337, steps2rev=30
[plustek] * llen=5381, lineRateColor=1, qtcnt=3, hfcnt=3
[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 0 (HDPI=12.000,MCLKD=6.500)
[plustek] * Setting GreenPWMDutyCycleLow
[plustek] * Current MCLK Divider = 6.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * FFStepSize = 102, [0x48] = 0x00, [0x49] = 0x66
[plustek] * PhyBytes = 746
[plustek] * PhyLines = 452
[plustek] * TotalBytes = 337192
[plustek] * PL=295, coeffsize=216, scaler=1
[plustek] * PauseLimit = 295, [0x4e] = 0x91, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] ImageProc is: ColorDuplicate8
[plustek] usb_ScanBegin()
[plustek] usb_MapDownload()
[plustek] * brightness = 0 -> 0
[plustek] * contrast = 0 -> 1.000
[plustek] * downloading map 0...
[plustek] * downloading map 1...
[plustek] * downloading map 2...
[plustek] usb_MapDownload() done.
[plustek] usb_DownloadShadingData(0)
[plustek] Downloading 1275 pixels
[plustek] Register Dump before reading data:
[plustek] 0x00: XX 00 80 09 00 XX XX 03 0b 1f 00 02 7c 3f 15 04
[plustek] 0x10: 16 01 02 05 06 00 00 0a 16 00 01 01 00 00 00 00
[plustek] 0x20: 14 f9 00 8c 0c 2c 00 00 03 01 04 91 00 00 3f ff
[plustek] 0x30: 00 00 00 00 00 00 00 00 32 28 2a 3e 2e 24 00 00
[plustek] 0x40: 40 00 26 00 00 13 01 51 00 66 01 04 00 00 91 01
[plustek] 0x50: 1e fc 14 81 00 13 10 04 00 44 44 4f 00 00 00 00
[plustek] 0x60: 40 60 0c 34 b2 44 28 48 00 03 00 00 d0 00 00 00
[plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00
[plustek] SampleY Flag set (50 != 150, wSumY=100)
[plustek] Creating file 'plustek-pic.raw'
[plustek] > X=248, Y=150, depth=8
[plustek] Reading the data now!
[plustek] PhyDpi.x = 50
[plustek] UserDpi.y = 50
[plustek] NumberOfScanBufs = 5622
[plustek] LinesPerScanBufs = 11244
[plustek] dwPhyBytes = 746
[plustek] dwPhyPixels = 248
[plustek] dwTotalBytes = 337192
[plustek] dwPixels = 248
[plustek] dwBytes = 744
[plustek] dwValidPixels = 248
[plustek] dwBytesScanBuf = 1492
[plustek] dwLinesDiscard = 2
[plustek] dwLinesToSkip = 3
[plustek] dwLinesUser = 150
[plustek] dwBytesLine = 744
[plustek] usb_IsDataAvailableInDRAM()
[plustek] Data is available
[plustek] drvclose()
[plustek] TIME END 1: 37s
[plustek] usbDev_stopScan()
[plustek] usbDev_ScanEnd(), start=1, park=1
[plustek] reader_process: finished reading data
[plustek] (SIG) Child is down (signal=17)
[plustek] MotorDPI=600, MaxMotorSpeed=1.250, FFStepSize=333
[plustek] MOTOR: PWM=0x04, PWM_DUTY=0x04 0x45=0x13 0x48=0x01, 0x49=0x4d
[plustek] MCLK_FFW = 6 --> 0x0a
[plustek] Lamp-Timer started (using ITIMER)
[plustek] usbDev_close()
[plustek] close_pipe (r_pipe)
[plustek] sane_cancel
[plustek] do_cancel
[plustek] TIME END 2: 37s
[plustek] sane_close
[plustek] sane_exit
[plustek] Shutdown called (dev->fd=-1, libusb:001:002)
[plustek] Waiting for scanner-ready...
[plustek] Switching lamp off...
[plustek] LAMP-STATUS: 0x00000001
[plustek] Switching Lamp off
[plustek] LAMP-STATUS: 0x00000000
[plustek] Lamp-Timer stopped


Wie gesagt, er scannt etwas. Rot sieht normal aus und ich hab noch ein bißchen Gelb, alles andere ist nicht zu sehen. Auch keine schwarze Schrift.
 
Hi,

spunti schrieb:
[SNIPSNAP]
Wie gesagt, er scannt etwas. Rot sieht normal aus und ich hab noch ein bißchen Gelb, alles andere ist nicht zu sehen. Auch keine schwarze Schrift.

also der Log sieht ganz normal aus. Was auffällt, ist die Tatsache,
dass die option mov in der falschen Sektion sitzt. Deine plustek.conf
Datei sollte eigentlich nur eine aktive
[usb]
Sektion besitzen. In Deinem Fall wird die zweite nicht verwendet und
somit kommt mov 1 auch nicht zur Wirkung. Aber egal. Dein Scanner
sollte mit den Standard-Einstellungen funktioniern. Ich muss das
bei mir mal checken. Du könntest mal das Programm vuescan von
Ed Hamrick ausprobieren, ob der Scanner damit läuft:
www.hamrick.com
Ich denke, wenn Ed Hamricks vuescan deinen Scanner zum Laufen bringt,
dann sollte das Plustek Backend dies auch können...

Grüsse,
Gerhard
 

spunti

Hacker
Ja, das "option mov 1" verwende ich nicht. Wenn ich das verwende, kann ich nicht scannen, weil keine Devices gefunden werden. (Auch nicht, wenn ich nur einen [USB]-Bereich habe.)

Hab auch aus meinem Modell noch 1001 gemacht anstatt 1000 und dann mov 1 gesetzt, wie es in der man-page steht. geht nicht.

das programm von dem anderen Kollegen, werde ich mal noch ausprobieren...

danke
spunti
 

spunti

Hacker
Bei "vuescan" krieg ich jetzt tatsächlich alle Farben! Ich kann es kaum glauben, der scheint die Farbkalibrierung irgend wie anders zu organisieren. Dafür ist das Bild sehr unscharf. Hab jetzt auch schon mal alle Änderungsmöglichkeiten ausprobiert und man kann da noch ein bißchen was machen, aber ob es wirklich brauchbar ist, kann ich noch nicht sagen. Ich hab in Gimp festgestellt, daß die Kanäle Rot/Grün/Blau jeweils leicht verschoben sind. Da kommt die Unschärfe her. D.h.: Notfalls könnte man die Kanäle wohl in Gimp übereinanderschieben - vielleicht per Makro.

Ein anderes Problem, sind senkrechte farbige Streifen - wenige Pixel breit in Magenta, Cyan oder Gelb. Ich nehme an, daß die von der Hardware kommen, weil die in etwa immer an derselben Stelle sind. Mein Windows-Treiber ist da wahrscheinlich so gut, daß der solche Streifen von sich aus rausfiltert und daß ich die deshalb dort nicht sehen.
Wie dem auch sei, da hab ich noch keine brauchbare Lösung und da wird es wohl schwerer mit Gimp da noch was zu machen - obwohl es theoretisch kein großes Problem sein sollte.

Jetzt werde ich erst mal sehen, ob ich da noch genauer weiterprobiere oder doch noch einen anderen Scanner kaufe.

spunti
 
spunti schrieb:
Bei "vuescan" krieg ich jetzt tatsächlich alle Farben! Ich kann es kaum glauben, der scheint die Farbkalibrierung irgend wie anders zu organisieren. Dafür ist das Bild sehr unscharf. Hab jetzt auch schon mal alle Änderungsmöglichkeiten ausprobiert und man kann da noch ein bißchen was machen, aber ob es wirklich brauchbar ist, kann ich noch nicht sagen. Ich hab in Gimp festgestellt, daß die Kanäle Rot/Grün/Blau jeweils leicht verschoben sind. Da kommt die Unschärfe her. D.h.: Notfalls könnte man die Kanäle wohl in Gimp übereinanderschieben - vielleicht per Makro.

Ein anderes Problem, sind senkrechte farbige Streifen - wenige Pixel breit in Magenta, Cyan oder Gelb. Ich nehme an, daß die von der Hardware kommen, weil die in etwa immer an derselben Stelle sind. Mein Windows-Treiber ist da wahrscheinlich so gut, daß der solche Streifen von sich aus rausfiltert und daß ich die deshalb dort nicht sehen.

So da haben wir den Salat. Es dürfte an der Kalibrierung liegen.
vuescan kriegt zwar Farben raus, jedoch verwaschen und mit
farbigen Streifen - dies heisst nix anderes, als das die Kalibrierung
auch hier nicht passt. Ebenso der Versatz von RGB. Da stimmt die
Grundeinstellung nicht :(

Das blöde ist, dass man da per Ferndiagnose nix machen kann.
Sorry,
Gerhard
 
Oben