Hallo zusammen,
habe gestern kde3.2 installiert und anschließend noch gleich des neue K3B 0.11.9 dazu. Nun kann ich aber keine CD´s mehr kopieren! Einzelne Files von Festplatte auf CD brennen funktioniert noch, aber wenn ich eine Daten-CD kopieren will bekomme ich immer folgende Meldung:
System
-----------------------
K3b Version: 0.11.9
KDE Version: 3.2.1
QT Version: 3.3.1
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.79-resmgr-patch '@(#)scsi-linux-sg.c 1.79 04/01/14 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a25-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Waiting for data on stdin...
Using libscg version 'schily-0.8'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-248F '
Revision : 'R601'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 29 MB
Total size: 33 MB (03:20.81) = 15061 sectors
Lout start: 34 MB (03:22/61) = 15061 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 344784
Forcespeed is OFF.
Starting to write CD/DVD at speed 48.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
/usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 200s
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 15.020s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=374 -dao -eject -waiti -xa1 -tsize=30965416 -
Und wenn ich eine VCD kopieren will, dann sagt mir K3B dass es keine CD´s mit mehreren Datenspuren kopiert. Hat jemand die selben Probs und weiß eventuell Abhilfe?
Schonmal vielen Dank im Voraus!
habe gestern kde3.2 installiert und anschließend noch gleich des neue K3B 0.11.9 dazu. Nun kann ich aber keine CD´s mehr kopieren! Einzelne Files von Festplatte auf CD brennen funktioniert noch, aber wenn ich eine Daten-CD kopieren will bekomme ich immer folgende Meldung:
System
-----------------------
K3b Version: 0.11.9
KDE Version: 3.2.1
QT Version: 3.3.1
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.79-resmgr-patch '@(#)scsi-linux-sg.c 1.79 04/01/14 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a25-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Waiting for data on stdin...
Using libscg version 'schily-0.8'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-248F '
Revision : 'R601'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 29 MB
Total size: 33 MB (03:20.81) = 15061 sectors
Lout start: 34 MB (03:22/61) = 15061 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 344784
Forcespeed is OFF.
Starting to write CD/DVD at speed 48.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
/usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 200s
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 15.020s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=374 -dao -eject -waiti -xa1 -tsize=30965416 -
Und wenn ich eine VCD kopieren will, dann sagt mir K3B dass es keine CD´s mit mehreren Datenspuren kopiert. Hat jemand die selben Probs und weiß eventuell Abhilfe?
Schonmal vielen Dank im Voraus!