[solved] Suse 10.0, E-Plus UMTS PCMCIA Card II, Modem hangup

[rob40]

Hallo,

ich versuche unter Suse 10.0 / Kernel 2.6.13-15-smp die
'E-Plus UMTS PCMCIA Card II' gemäß Tut. unter
http://www.meproxsoft.de/download.html
zu nutzen, habe aber dasselbe Prob wie in
http://www.linux-club.de/viewtopic.php?t=55341&highlight=umts / ganz unten
und
http://www.linux-club.de/viewtopic.php?t=55625&highlight=eplus+pppd++hangup+sighup
beschrieben.

/var/log/messages
...
Mar 29 15:06:00 lp kernel: usb 6-1: Option 3G data card converter now attached to ttyUSB3
Mar 29 15:06:00 lp kernel: usbcore: registered new driver option
Mar 29 15:06:00 lp kernel: drivers/usb/serial/option.c: Option Card (PC-Card to) USB to Serial Driver: v0.4
Mar 29 15:06:42 lp modify_resolvconf: Service smpppd-ifcfg modified /etc/resolv.conf. See info block in this file
Mar 29 15:06:43 lp pppd[6274]: Plugin passwordfd.so loaded.
Mar 29 15:06:43 lp kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 29 15:06:43 lp kernel: PPP generic driver version 2.4.2
Mar 29 15:06:43 lp pppd[6274]: pppd 2.4.3 started by root, uid 0
Mar 29 15:06:43 lp pppd[6274]: Renamed interface ppp0 to modem0
Mar 29 15:06:43 lp pppd[6274]: Using interface modem0
Mar 29 15:06:43 lp pppd[6274]: replacing old default route to eth0 [192.168.0.56]
Mar 29 15:06:43 lp pppd[6274]: local  IP address 192.168.99.1
Mar 29 15:06:43 lp pppd[6274]: remote IP address 192.168.99.99
Mar 29 15:06:46 lp pppd[6274]: Starting link
Mar 29 15:06:49 lp wvdial[6301]: WvDial: Internet dialer version 1.54.0
Mar 29 15:06:49 lp wvdial[6301]: Initializing modem.
Mar 29 15:06:49 lp wvdial[6301]: Sending: ATZ
Mar 29 15:06:49 lp wvdial[6301]: ATZ
Mar 29 15:06:49 lp wvdial[6301]: OK
Mar 29 15:06:49 lp wvdial[6301]: Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Mar 29 15:06:49 lp wvdial[6301]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Mar 29 15:06:49 lp wvdial[6301]: OK
Mar 29 15:06:49 lp wvdial[6301]: Sending: ATM1
Mar 29 15:06:49 lp wvdial[6301]: ATM1
Mar 29 15:06:49 lp wvdial[6301]: OK
Mar 29 15:06:49 lp wvdial[6301]: Modem initialized.
Mar 29 15:06:49 lp wvdial[6301]: Sending: ATDT*99#
Mar 29 15:06:49 lp wvdial[6301]: Waiting for carrier.
Mar 29 15:06:49 lp wvdial[6301]: ATDT*99#
Mar 29 15:06:49 lp wvdial[6301]: CONNECT 384000
Mar 29 15:06:49 lp wvdial[6301]: Carrier detected.  Waiting for prompt.
Mar 29 15:07:19 lp wvdial[6301]: Don't know what to do!  Starting pppd and hoping for the best.
Mar 29 15:07:19 lp pppd[6274]: Serial connection established.
Mar 29 15:07:19 lp pppd[6274]: Connect: modem0 <--> /dev/ttyUSB0
Mar 29 15:07:20 lp pppd[6274]: CHAP authentication succeeded
Mar 29 15:07:20 lp kernel: PPP BSD Compression module registered
Mar 29 15:07:20 lp kernel: PPP Deflate Compression module registered
Mar 29 15:07:20 lp pppd[6274]: Hangup (SIGHUP)
Mar 29 15:07:20 lp pppd[6274]: Modem hangup
Mar 29 15:07:20 lp pppd[6274]: Connection terminated.

Auch mit

Einwahlnummer: *99***1#

kein Erfolg.

/dev/ttyUSB*
/dev/ttyUSB0  /dev/ttyUSB1  /dev/ttyUSB2  /dev/ttyUSB3

09: USB 00.0: 0700 Serial controller
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_af0_6300__Serial_Numbe_if0_serial_usb_0
  Unique ID: ZmS7.GHNMJ74MN7E
  Parent ID: 7eqy.8l8daCd3iHA
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.1/0000:07:00.1/usb6/6-1/6-1:1.0
  SysFS BusID: 6-1:1.0
  Hardware Class: unknown
  Model: "Option N.V Fusion UMTS Quad-GPRS"
  Hotplug: USB
  Vendor: usb 0x0af0 "Option N.V."
  Device: usb 0x6300 "Fusion UMTS Quad-GPRS"
  Serial ID: "?Serial Numbe"
  Driver: "option"
  Device File: /dev/ttyUSB0
  Device Number: char 188:0
  Speed: 12 Mbps
  Module Alias: "usb:v0AF0p6300d0000dc00dsc00dp00icFFiscFFipFF"
  Driver Info #0:
    Driver Status: option is active
    Driver Activation Cmd: "modprobe option"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #8 (Hub)

Habe diverse AT Commands versucht - und komme auch mit dem Initbefehl aus
http://www.linux-club.de/viewtopic.php?t=51528&highlight=umts
nicht weiter.

/etc/sysconfig/network/ifcfg-modem0
BOOTPROTO='none'
DIALCOMMAND='ATDT'
DIALPREFIX=''
DIALPREFIXREGEX=''
INIT1='ATZ'
INIT2='AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0'
#       INIT3='+at cgatt=0'      nada
INIT3=''
#       INIT3='+cgdcont=1,"ip","internet.eplus.de"'
INIT8='ATM1'
INIT9=''
MODEM_DEVICE='/dev/ttyUSB0'
NAME='AT Modem'
PPPD_OPTIONS=''
PROVIDER='provider1'
SPEED='4000000'
STARTMODE='auto'
#       STARTMODE='manual'
UNIQUE='CBAB.KM1shMXflFC'
USERCONTROL='yes'

Weiß jemand Rat ?
Wär Klasse.

 

[rob40]

Lösung:

cat /etc/sysconfig/network/ifcfg-modem0

BOOTPROTO='none'
DIALCOMMAND='ATDT'
DIALPREFIX=''
DIALPREFIXREGEX=''
INIT1='at_opsys=1'
INIT3='AT+CGDCONT=1,"IP","internet.eplus.de"'
MODEM_DEVICE='/dev/ttyUSB0'
NAME='AT Modem'
PPPD_OPTIONS=''
PROVIDER='provider1'
SPEED='4000000'
STARTMODE='auto'
UNIQUE='CBAB.KM1shMXflFC'
USERCONTROL='yes'