Seit Stunden durchforste ich die nicht wenigen Beiträge zu Scannern und gehe jetzt mal davon aus, dass nichts für mich zu finden ist.
Ich bin gerade von suse 9.3. auf suse 10.2 umgestiegen und jetzt lässt sich der Scanner vom EPSON cx-5400 nicht mehr installieren. YAST benennt das Gerät, aber erklärt den Treiber für "Nicht konfiguriert". Wenn ich den Treiber einrichte, bekomme ich:
Ich habe alles mögliche versucht, auch die Treiber von Avasys und epkowa, es bleibt das gleiche. Mache ich was falsch, oder spinnt hier die Software? Bei 9.3 hatte ich das Problem nicht.
Nun zu den Daten:
sane-version: 1.0.18
scanimage -L ergibt:
sane-find-scanner ergibt
Schon mal danke fürs Lesen. Vielleicht hat ja eine/r ne Idee.
Ich bin gerade von suse 9.3. auf suse 10.2 umgestiegen und jetzt lässt sich der Scanner vom EPSON cx-5400 nicht mehr installieren. YAST benennt das Gerät, aber erklärt den Treiber für "Nicht konfiguriert". Wenn ich den Treiber einrichte, bekomme ich:
epson Kein Scanner von diesem Treiber erkannt
Ich habe alles mögliche versucht, auch die Treiber von Avasys und epkowa, es bleibt das gleiche. Mache ich was falsch, oder spinnt hier die Software? Bei 9.3 hatte ich das Problem nicht.
Nun zu den Daten:
sane-version: 1.0.18
scanimage -L ergibt:
Code:
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `epson'
[dll] add_backend: adding backend `epkowa'
[dll] sane_get_devices
[dll] load: searching backend `epkowa' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1'
[dll] init: initializing backend `epkowa'
[dll] init: backend `epkowa' is version 1.0.205
[dll] load: searching backend `epson' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[dll] init: backend `epson' is version 1.0.246
[dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epkowa's exit function
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: finished
sane-find-scanner ergibt
Code:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x0808 [USB MFP]) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Schon mal danke fürs Lesen. Vielleicht hat ja eine/r ne Idee.