the_Blues
Newbie
Hallo Susianer,
seit einigen Jahren nutze ich Debian und war ganz weg von SuSE. Nun wollte ich mal testen und habe mir die 10.04 installiert. Unter VBox in Ubuntu tat es wunderbar. Aber "stand alone" zickt die Grafik.
Boot:
BOOT_IMAGE=/boot/vmlinuz-2.6.37.1-1.2-default root=/dev/disk/by-id/ata-SAMSUNG_MP0603H_S03ZJ10Y121997-part4 resume=/dev/disk/by-id/ata-SAMSUNG_MP0603H_S03ZJ10Y121997-part5 splash=silent i915.modeset=1 showopts vga=0x317
Info:
14: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: _Znp.UTZNQaKURl1
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel 855 GM"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3582 "855 GM"
SubVendor: pci 0x152d "QUANTA Computer Inc"
SubDevice: pci 0x0727
Revision: 0x02
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xe8000000-0xefffffff (ro,non-prefetchable)
Memory Range: 0xe0000000-0xe007ffff (rw,non-prefetchable)
I/O Ports: 0x1800-0x1807 (rw)
IRQ: 6 (28371 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00008086d00003582sv0000152Dsd00000727bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
5: PCI 02.1: 0380 Display controller
[Created at pci.318]
Unique ID: ruGf.UV_FrrVRB_6
SysFS ID: /devices/pci0000:00/0000:00:02.1
SysFS BusID: 0000:00:02.1
Hardware Class: graphics card
Model: "Intel 855 GM"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3582 "855 GM"
SubVendor: pci 0x152d "QUANTA Computer Inc"
SubDevice: pci 0x0727
Revision: 0x02
Memory Range: 0xf0000000-0xf7ffffff (ro,non-prefetchable)
Memory Range: 0xe0080000-0xe00fffff (rw,non-prefetchable)
Module Alias: "pci:v00008086d00003582sv0000152Dsd00000727bc03sc80i00"
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
Der Bildschirmhintergrund sieht aus, wie in Streifen geschnitten und die Fenster flackern, oder sind gar nicht zu sehen.
Irgendwelche Ideen?
thx
seit einigen Jahren nutze ich Debian und war ganz weg von SuSE. Nun wollte ich mal testen und habe mir die 10.04 installiert. Unter VBox in Ubuntu tat es wunderbar. Aber "stand alone" zickt die Grafik.
Boot:
BOOT_IMAGE=/boot/vmlinuz-2.6.37.1-1.2-default root=/dev/disk/by-id/ata-SAMSUNG_MP0603H_S03ZJ10Y121997-part4 resume=/dev/disk/by-id/ata-SAMSUNG_MP0603H_S03ZJ10Y121997-part5 splash=silent i915.modeset=1 showopts vga=0x317
Info:
14: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: _Znp.UTZNQaKURl1
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel 855 GM"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3582 "855 GM"
SubVendor: pci 0x152d "QUANTA Computer Inc"
SubDevice: pci 0x0727
Revision: 0x02
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xe8000000-0xefffffff (ro,non-prefetchable)
Memory Range: 0xe0000000-0xe007ffff (rw,non-prefetchable)
I/O Ports: 0x1800-0x1807 (rw)
IRQ: 6 (28371 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00008086d00003582sv0000152Dsd00000727bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
5: PCI 02.1: 0380 Display controller
[Created at pci.318]
Unique ID: ruGf.UV_FrrVRB_6
SysFS ID: /devices/pci0000:00/0000:00:02.1
SysFS BusID: 0000:00:02.1
Hardware Class: graphics card
Model: "Intel 855 GM"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3582 "855 GM"
SubVendor: pci 0x152d "QUANTA Computer Inc"
SubDevice: pci 0x0727
Revision: 0x02
Memory Range: 0xf0000000-0xf7ffffff (ro,non-prefetchable)
Memory Range: 0xe0080000-0xe00fffff (rw,non-prefetchable)
Module Alias: "pci:v00008086d00003582sv0000152Dsd00000727bc03sc80i00"
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
Der Bildschirmhintergrund sieht aus, wie in Streifen geschnitten und die Fenster flackern, oder sind gar nicht zu sehen.
Irgendwelche Ideen?
thx