• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

SuSE 15.4: Die Bildschirmsperre ist gestört und die Sitzung kann nicht wieder freigegeben werden.

Zerberus

Member
Hi Leute,
seit einer guten Woche habe ich einen neuen Computer mit SuSE Leap 15.4 bespielt und erhalte seitdem regelmäßig, ein bis mehrmals täglich einen schwarzen Bildschirm mit
"Die Bildschirmsperre ist gestört und die Sitzung kann nicht wieder freigegeben werden. Zum Freigeben, wechseln Sie auf eine Konsole (z.B. Strg+Alt+F2), melden sich an und führen Sie den Befehl:
loginctl unlock-session 3
aus. Melden Sie sich dann mit Strg+D aus der virtuellen Sitzung ab, und wechseln Sie dann wieder zur laufenden Sitzung (Strg+Alt+F7)."
Diese Meldung sehe ich erst seit SuSe 15.4. Vorher hatte ich nie sowas. Jetzt aber am laufenden Band.
Ich habe den ersten Desktop in der Installation gewählt. Glaube das hieß KDE mit Plasma.
In der Regel habe ich Thunderbird als Anwendung offen. Sonst eigentlich nichts.
Thunderbird ist auch eine Quelle des Kummers. Jedesmal wenn ich ihn verlassen habe, muss ich ihn neu einrichten :-(
Hat jemand ne Ahnung was dafür verantwortlich sein könnte?
Ach ja: ist ein AMD Ryzen 5600G Prozessor mit eingebauten Grafik im Chip.
CIAO Zerberus
 

susejunky

Moderator
Teammitglied
Hallo Zerberus,

... Thunderbird ist auch eine Quelle des Kummers. Jedesmal wenn ich ihn verlassen habe, muss ich ihn neu einrichten :-(
Hat jemand ne Ahnung was dafür verantwortlich sein könnte?

Deine Chancen Unterstützung bei diesem Problem zu erhalten sind wahrscheinlich deutlich größer, wenn Du dafür einen gesonderten Beitrag mit aussagekräftiger Überschrift erstellst.

Viele Grüße

susejunky
 
OP
Z

Zerberus

Member
Hi Sauerland,

auf mtab sehe ich:

Code:
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
devtmpfs /dev devtmpfs rw,nosuid,size=4096k,nr_inodes=1048576,mode=755,inode64 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,inode64 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,nodev,size=3142524k,nr_inodes=819200,mode=755,inode64 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,size=4096k,nr_inodes=1024,mode=755,inode64 0 0
cgroup2 /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
efivarfs /sys/firmware/efi/efivars efivarfs rw,nosuid,nodev,noexec,relatime 0 0
none /sys/fs/bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/rdma cgroup rw,nosuid,nodev,noexec,relatime,rdma 0 0
cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0
cgroup /sys/fs/cgroup/misc cgroup rw,nosuid,nodev,noexec,relatime,misc 0 0
/dev/sda3 / btrfs rw,relatime,space_cache,subvolid=256,subvol=/@ 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14153 0 0
mqueue /dev/mqueue mqueue rw,nosuid,nodev,noexec,relatime 0 0
tracefs /sys/kernel/tracing tracefs rw,nosuid,nodev,noexec,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,nosuid,nodev,noexec,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime,pagesize=2M 0 0
fusectl /sys/fs/fuse/connections fusectl rw,nosuid,nodev,noexec,relatime 0 0
configfs /sys/kernel/config configfs rw,nosuid,nodev,noexec,relatime 0 0
nfsd /proc/fs/nfsd nfsd rw,relatime 0 0
/dev/sda3 /boot/grub2/i386-pc btrfs rw,relatime,space_cache,subvolid=265,subvol=/@/boot/grub2/i386-pc 0 0
/dev/sda3 /boot/grub2/x86_64-efi btrfs rw,relatime,space_cache,subvolid=264,subvol=/@/boot/grub2/x86_64-efi 0 0
/dev/sda3 /opt btrfs rw,relatime,space_cache,subvolid=263,subvol=/@/opt 0 0
/dev/sda3 /root btrfs rw,relatime,space_cache,subvolid=262,subvol=/@/root 0 0
/dev/sda3 /srv btrfs rw,relatime,space_cache,subvolid=261,subvol=/@/srv 0 0
/dev/sda3 /tmp btrfs rw,relatime,space_cache,subvolid=260,subvol=/@/tmp 0 0
/dev/sda3 /usr/local btrfs rw,relatime,space_cache,subvolid=259,subvol=/@/usr/local 0 0
/dev/sda3 /var btrfs rw,relatime,space_cache,subvolid=258,subvol=/@/var 0 0
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/sda4 /home xfs rw,relatime,attr2,inode64,logbufs=8,logbsize=32k,noquota 0 0
/dev/sda5 /data xfs rw,relatime,attr2,inode64,logbufs=8,logbsize=32k,noquota 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
tmpfs /run/user/500 tmpfs rw,nosuid,nodev,relatime,size=1571260k,nr_inodes=392815,mode=700,uid=500,gid=100,inode64 0 0
gvfsd-fuse /run/user/500/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=500,group_id=100 0 0
portal /run/user/500/doc fuse.portal rw,nosuid,nodev,relatime,user_id=500,group_id=100 0 0
tracefs /sys/kernel/debug/tracing tracefs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /run/user/0 tmpfs rw,nosuid,nodev,relatime,size=1571260k,nr_inodes=392815,mode=700,inode64 0 0

Danke fürs gucken
CIAO Zerberus
 

spoensche

Moderator
Teammitglied
Poste mal die Ausgabe von:
Code:
grep -i screensaver .xsession-errors

und

Code:
sudo journalctl --no-pager | grep -Ei "login|screen"
 
OP
Z

Zerberus

Member
Hi Sauerland und spoensche,

hier ein paar Ausgaben:

Code:
Dateisystem    Typ  Gr��e Benutzt Verf. Verw% Eingeh�ngt auf
/dev/sda4      xfs   400G     20G  381G    5% /home

grep -i screensaver .xsession-errors
Da kam gar nichts zurück. Oder sollte das in einem speziellen Verzeichnis sein? Ich habe es im gerade aktiven, im HomeDir und im HomeDir von root versucht.

sudo journalctl --no-pager | grep -Ei "login|screen"
Da kamen 1.8 MByte zurück. Kannst Du das noch etwas spezifischer eingrenzen, was Dich interessiert? Ein kleiner Auszug (die letzten 100 Zeilen):
Code:
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr:         Disable outputs: false
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr:         Change outputs: false
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr:         Enable outputs: true
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr:                  (84)
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: QMap((79, XRandRCrtc(0x55d7ca558e10))(80, XRandRCrtc(0x55d7ca558d60))(81, XRandRCrtc(0x55d7ca554f50))(82, XRandRCrtc(0x55d7ca555020)))
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Testing CRTC 79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: RRSetCrtcConfig (enable output)
                                                                 Mode: KScreen::Mode(Id: "87" , Size: QSize(2560, 1440) @ 74.5989 ) Preferred: "87"
                                                                 Rotation: KScreen::Output::None
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandRCrtc  79  m_timestamp update  250950140  =>  250953727
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr:         Result:  0  timestamp:  250953727
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandROutput 84 update
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Connected output 84 to CRTC 79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: RRSetOutputPrimary
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandR::setConfig done!
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper: RRNotify_CrtcChange
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Timestamp:  250952388
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         CRTC:  79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Mode:  87
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Rotation:  "Rotate_0"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Geometry:  0 0 2560 1440
...
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper: RRNotify_OutputChange
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Timestamp:  250952388
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Output:  84
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         CRTC:  79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Mode:  87
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Rotation:  "Rotate_0"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Connection:  "Connected"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Subpixel Order:  0
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper: RRNotify_OutputChange
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Timestamp:  250953727
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Output:  84
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         CRTC:  79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Mode:  87
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Rotation:  "Rotate_0"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Connection:  "Connected"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Subpixel Order:  0
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper: RRScreenChangeNotify
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Timestamp:  250953727
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Config_timestamp:  250953016
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Window: 39845893
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Root: 1733
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Rotation:  "Rotate_0"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Size ID: 0
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Size:  2560 1440
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         SizeMM:  677 381
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper: RRNotify_OutputChange
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Timestamp:  250953727
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Output:  84
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         CRTC:  79
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Mode:  87
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Rotation:  "Rotate_0"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Connection:  "Connected"
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xcb.helper:         Subpixel Order:  0
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandRCrtc  79  m_configTimestamp update 250950140  =>  250952388
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandROutput 84 update
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Output 84 : connected = true , enabled = true
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandROutput 84 update
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Output 84 : connected = true , enabled = true
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandROutput 84 update
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Output 84 : connected = true , enabled = true
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: XRandROutput 84 update
Dez 17 19:02:24 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Output 84 : connected = true , enabled = true
Dez 17 19:02:25 server3 kscreen_backend_launcher[2089]: kscreen.xrandr: Emitting configChanged()
Dez 17 19:12:09 server3 kscreenlocker_greet[27454]: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
Dez 17 19:12:09 server3 kscreenlocker_greet[27454]: This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
                                                    Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
Dez 17 19:12:09 server3 kscreenlocker_greet[27455]: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
Dez 17 19:12:09 server3 kscreenlocker_greet[27455]: This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
                                                    Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
Dez 17 19:12:09 server3 kscreenlocker_greet[27456]: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
Dez 17 19:12:09 server3 kscreenlocker_greet[27456]: This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
                                                    Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
Dez 17 19:12:09 server3 kscreenlocker_greet[27457]: qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
Dez 17 19:12:09 server3 kscreenlocker_greet[27457]: This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
                                                    Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
                                        Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.

CIAO Zerberus
 

spoensche

Moderator
Teammitglied
Den Meldungen nach liegt es wohl an Qt. Da die kscreenlocker davon betroffen ist, kann dies die Ursache für dein Problem sein.
 
OP
Z

Zerberus

Member
Ich habe das jetzt über Wochen beobachtet und meinen Rechner nur ganz selten benutzt. Läuft aber 24h durch, weil es halt mein Server ist. Tritt ziemlich ohne äußeren Anlaß auf. Kann noch am selben Tag sein, an dem er neu gestartet wurde oder aber erst nach 2-5 Tagen. Wenn es auftritt, ist die Fähigkeit zwei Programme nebeneinander auszuführen betroffen. Eines geht meistens aber nicht immer. Nach einem Reboot sieht es dann wieder normal aus.
Könnte eine Neuinstallation von Qt Erfolgsaussichten haben?
Inzwischen überlege ich mir ernsthaft es mal mit Ubuntu zu versuchen.
 

tomm.fa

Administrator
Teammitglied
Zeige mal bitte die Ausgabe von:
Code:
env | grep -E "XDG_SESSION_TYPE|DESKTOP_SESSION"
und so nebenbei
Code:
zypper lr -d
Wird VNC verwendet?
 
Zuletzt bearbeitet:
OP
Z

Zerberus

Member
Hi tomm.fa,
musste ein bißchen warten, weil ich annahm, daß das Problem wieder auftaucht. Ich habe die Angaben gemacht, als das Problem aktiv war:

env | grep -E "XDG_SESSION_TYPE|DESKTOP_SESSION"
gab als Antwort:
DESKTOP_SESSION=/usr/share/xsessions/plasma5
XDG_SESSION_TYPE=x11

und
Code:
#  | Alias                       | Name                                                                                        | Enabled   | GPG Check       | Refresh        | Priority  | Type   | URI                                                                         | Serv->
---+-----------------------------+---------------------------------------------------------------------------------------------+-----------+-----------------+----------------+-----------+--------+-----------------------------------------------------------------------------+-------
1 | openSUSE-Leap-15.4-1        | openSUSE-Leap-15.4-1                                                                        | Nein      | ----            | ----           |   99      | rpm-md | hd:/?device=/dev/disk/by-id/usb-Intenso_Ultra_Line_17092400051196-0:0-part2 | 
2 | repo-backports-debug-update | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/update/leap/15.4/backports_debug/              | 
3 | repo-backports-update       | Update repository of openSUSE Backports                                                     | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/15.4/backports/                    | 
4 | repo-debug                  | Debug Repository                                                                            | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/15.4/repo/oss/         | 
5 | repo-debug-non-oss          | Debug Repository (Non-OSS)                                                                  | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/distribution/leap/15.4/repo/non-oss/     | 
6 | repo-debug-update           | Update Repository (Debug)                                                                   | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/15.4/oss/                    | 
7 | repo-debug-update-non-oss   | Update Repository (Debug, Non-OSS)                                                          | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/15.4/non-oss/                | 
8 | repo-non-oss                | Non-OSS Repository                                                                          | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/distribution/leap/15.4/repo/non-oss/           | 
9 | repo-oss                    | Main Repository                                                                             | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/distribution/leap/15.4/repo/oss/               | 
10 | repo-sle-debug-update       | Update repository with debuginfo for updates from SUSE Linux Enterprise 15                  | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/debug/update/leap/15.4/sle/                    | 
11 | repo-sle-update             | Update repository with updates from SUSE Linux Enterprise 15                                | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/15.4/sle/                          | 
12 | repo-source                 | Source Repository                                                                           | Nein      | ----            | ----           |   99      | NONE   | http://download.opensuse.org/source/distribution/leap/15.4/repo/oss/        | 
13 | repo-update                 | Main Update Repository                                                                      | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/15.4/oss/                          | 
14 | repo-update-non-oss         | Update Repository (Non-Oss)                                                                 | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://download.opensuse.org/update/leap/15.4/non-oss/                      |

und nein es wird kein VNC verwendet. Ich schreibe das direkt auf diesem System.

CIAO Zerberus
 
OP
Z

Zerberus

Member
Hi Spoensche,

Deinen Wunsch konnte ich nicht erfüllen. Dieses Programm gibt es nicht, aber dafür ein
/usr/lib64/libexec/kscreenlocker_greet

Wenn ich das als "/usr/lib64/libexec/kscreenlocker_greet --testing" ausführe (als root) erhalte ich einen Einlogbildschirm als root. allerdings habe ich blöderweise als ich das gemacht habe angenommen, es würde Text rauskommen und es mit
"/usr/lib64/libexec/kscreenlocker_greet --testing > textdatei.txt" ausgeführt. Danach habe ich das System rebooted. Jetzt stelle ich fest, daß die Textdatei leer war. Nochmal ausgeführt ohne Umleitung und ich sehe einen Einlogbildschirm.
Soll ich Dir ein Bild davon machen?

CIAO Zerberus
 
OP
Z

Zerberus

Member
Hi spoensche,

das Problem trat wieder auf. Jetzt als normaler User "/usr/lib64/libexec/kscreenlocker_greet --testing" eingetippt und es kommt kein neuer Loginbildschirm sondern:
Code:
Maximum number of clients reachedMaximum number of clients reachedqt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
Wenn ich das als root mache passiert das gleiche.
Das ist merkwürdig, denn das letzte Mal hat ein Loginscreen aufgemacht.
Im log /var/log/messages ist einer dieser Aufrufe enthalten. Ich habe es aber mehrmals gemacht. Der erste Aufruf ist enthalten. Ist aber nur das gleiche zu sehen, wie auf der Konsole auch erschien.

CIAO Zerberus
 
Oben