System friert ein

Gandalf333 · 26 Juni 2008

AMD Athlon(tm) XP 2200+
nVidia Corporation
Modell: GeForce4 MX 440 with AGP8X

openSUSE 11.0 (i586)
KDE: 3.5.9 "release 49.1"

Firefox 3.0

Bei mir friert schon einige Wochen plötzlich das System ein und ich kann nichts mehr machen ausser den PC aus- und wieder einschalten.
Am Anfang habe ich gedacht, daß es mit Firefox zusammen hängen würde, aber beim Konqueror passiert es genauso. Ich kann nicht einmal mehr die Maus bedienen.

Code:

uname -a
Linux linux-69xu 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 athlon i386 GNU/Linux

Code:

lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
00:0b.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97] [1274:1371] (rev 06)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] [10de:0181] (rev a2)

Code:

lsusb
Bus 004 Device 002: ID 0400:1000 National Semiconductor Corp. Mustek BearPaw 1200 Scanner
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 003 Device 002: ID 06a2:0033 Topro Technology, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code:

/var/log/boot.msg
bash: /var/log/boot.msg: Keine Berechtigung

Code:

tail -f /var/log/messages
Jun 26 18:36:21 linux-69xu smartd[3167]: Device: /dev/sda, SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 172 to 142
Jun 26 18:36:21 linux-69xu smartd[3167]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 172 to 142
Jun 26 18:36:21 linux-69xu smartd[3167]: Device: /dev/sda, SMART Usage Attribute: 200 Multi_Zone_Error_Rate changed from 253 to 100
Jun 26 18:53:39 linux-69xu su: FAILED SU (to root) frank on /dev/pts/1
Jun 26 18:53:51 linux-69xu su: (to root) frank on /dev/pts/1
Jun 26 18:55:53 linux-69xu su: (to root) frank on /dev/pts/2
Jun 26 19:05:50 linux-69xu syslog-ng[1569]: STATS: dropped 0
Jun 26 19:06:21 linux-69xu smartd[3167]: Device: /dev/sda, SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 142 to 130
Jun 26 19:06:21 linux-69xu smartd[3167]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 142 to 130
Jun 26 19:08:00 linux-69xu kernel: nscd[2997]: segfault at ffebc10c ip b80af7dc sp afeedfd0 error 4 in nscd[b809f000+1c000]

Code:

hwinfo --gfx
10: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_10de_181
  Unique ID: VCu0.3XTA_pAJCJF
  Parent ID: vSkL.S16qDHSKEeD
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "ASUSTeK V9180 Magic"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0181 "GeForce4 MX 440 with AGP8X"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x806f "V9180 Magic"
  Revision: 0xa2
  Memory Range: 0xdc000000-0xdcffffff (rw,non-prefetchable)
  Memory Range: 0xd8000000-0xdbffffff (rw,prefetchable)
  IRQ: 11 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000181sv00001043sd0000806Fbc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Driver Info #1:
    XFree86 v4 Server Module: nvidia
    3D Support: yes
    Color Depths: 16
    Extensions:
    Options:
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

Primary display adapter: #10

lOtz1009 · 26 Juni 2008

Hast du eventuell ein Hitzeproblem? Ich hatte jetzt bei den Temperaturen ähnliches, aber nachdem ich einen neuen Prozessorlüfter eingebaut habe läuft alles.

dietger · 27 Juni 2008

Hast Du evtl. Beagle installiert und am laufen ?

Dietger

whois · 27 Juni 2008

Hi

Zeig uns nochmal die /var/log/boot.msg bitte als root und deine Prozesstabelle.

Code:

ps aux

cu

Gandalf333 · 27 Juni 2008

Code:

 ps aux
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0    772   300 ?        Ss   13:50   0:01 init [5]
root         2  0.0  0.0      0     0 ?        S<   13:50   0:00 [kthreadd]
root         3  0.0  0.0      0     0 ?        S<   13:50   0:00 [migration/0]
root         4  0.0  0.0      0     0 ?        S<   13:50   0:00 [ksoftirqd/0]
root         5  0.0  0.0      0     0 ?        S<   13:50   0:00 [events/0]
root         6  0.0  0.0      0     0 ?        S<   13:50   0:00 [khelper]
root         7  0.0  0.0      0     0 ?        S<   13:50   0:00 [kblockd/0]
root         8  0.0  0.0      0     0 ?        S<   13:50   0:00 [kacpid]
root         9  0.0  0.0      0     0 ?        S<   13:50   0:00 [kacpi_notify]
root        10  0.0  0.0      0     0 ?        S<   13:50   0:00 [cqueue]
root        11  0.0  0.0      0     0 ?        S<   13:50   0:00 [kseriod]
root        12  0.0  0.0      0     0 ?        S<   13:50   0:00 [kondemand/0]
root        13  0.0  0.0      0     0 ?        S    13:50   0:00 [pdflush]
root        14  0.0  0.0      0     0 ?        S    13:50   0:00 [pdflush]
root        15  0.0  0.0      0     0 ?        S<   13:50   0:00 [kswapd0]
root        16  0.0  0.0      0     0 ?        S<   13:50   0:00 [aio/0]
root        17  0.0  0.0      0     0 ?        S<   13:50   0:00 [kpsmoused]
root        59  0.0  0.0      0     0 ?        S<   13:50   0:00 [ata/0]
root        60  0.0  0.0      0     0 ?        S<   13:50   0:00 [ata_aux]
root        62  0.0  0.0      0     0 ?        S<   13:50   0:00 [scsi_eh_0]
root        63  0.0  0.0      0     0 ?        S<   13:50   0:00 [scsi_eh_1]
root       182  0.0  0.0      0     0 ?        S<   13:50   0:00 [ksuspend_usbd]
root       185  0.0  0.0      0     0 ?        S<   13:50   0:00 [khubd]
root       473  0.0  0.0      0     0 ?        S<   13:51   0:00 [kjournald]
root       548  0.0  0.0   2516  1188 ?        S<s  13:51   0:00 /sbin/udevd --d
root       733  0.0  0.0      0     0 ?        S<   13:51   0:00 [kgameportd]
root      1174  0.0  0.0      0     0 ?        S<   13:51   0:00 [kauditd]
root      1187  0.0  0.0      0     0 ?        S<   13:51   0:00 [kstriped]
root      1218  0.0  0.0      0     0 ?        S<   13:51   0:00 [kjournald]
root      1559  0.0  0.0   1916   672 ?        Ss   13:51   0:00 /sbin/resmgrd
root      1572  0.0  0.0   1664   552 ?        Ss   13:51   0:00 /sbin/acpid
root      1576  0.0  0.0   2200   688 ?        Ss   13:51   0:00 /sbin/syslog-ng
root      1580  0.0  0.0   1800   540 ?        Ss   13:51   0:00 /sbin/klogd -c
101       1583  0.0  0.0   2408   916 ?        Ss   13:51   0:00 /bin/dbus-daemo
root      1601  0.0  0.1   7752  2384 ?        Ssl  13:51   0:00 /usr/sbin/conso
104       1759  0.0  0.2   6344  4396 ?        Ss   13:51   0:00 /usr/sbin/hald
root      1760  0.0  0.0   3220  1120 ?        S    13:51   0:00 hald-runner
104       1812  0.0  0.0   2204   976 ?        S    13:51   0:00 hald-addon-acpi
root      1813  0.0  0.0   3332  1076 ?        S    13:51   0:00 hald-addon-inpu
root      2152  0.0  0.0   3336  1088 ?        S    13:51   0:00 hald-addon-stor
root      2501  0.0  0.0   1840   716 ?        S    13:51   0:00 /sbin/dhcpcd -H
bin       2964  0.0  0.0   1696   452 ?        Ss   13:51   0:00 /sbin/portmap
root      2992  0.0  0.0  10248   696 ?        S<sl 13:51   0:00 /sbin/auditd -s
root      2994  0.0  0.0  10004   688 ?        S<sl 13:51   0:00 /sbin/audispd
root      3000  0.0  0.0   3556   944 ?        S    13:51   0:00 /opt/kde3/bin/k
avahi     3012  0.0  0.0   2872  1520 ?        Ss   13:51   0:00 avahi-daemon: r
root      3055  0.0  0.1   7548  2452 ?        Ss   13:51   0:00 /usr/sbin/cupsd
root      3056  2.2  1.0  26964 21764 tty7     Ss+  13:51   0:32 /usr/bin/Xorg -
root      3076  0.0  0.0   4628  1696 ?        S    13:51   0:00 -:0
root      3108  0.0  0.0   6552  1756 ?        Ss   13:51   0:00 /usr/lib/postfi
postfix   3116  0.0  0.0   6352  1696 ?        S    13:51   0:00 pickup -l -t fi
postfix   3119  0.0  0.0   6396  1732 ?        S    13:51   0:00 qmgr -l -t fifo
root      3132  0.0  0.0   1824   528 ?        Ss   13:51   0:00 /usr/sbin/avahi
root      3145  0.0  0.0   2060   584 ?        Ss   13:51   0:00 /usr/sbin/cron
root      3161  0.0  0.0   4600  1752 ?        S    13:51   0:00 /usr/sbin/power
root      3203  0.0  0.0   3144   540 ?        S    13:51   0:00 /usr/sbin/smart
root      3207  0.0  0.0   5440  1088 ?        Ss   13:51   0:01 /usr/sbin/smppp
root      3238  0.0  0.0   6328  1072 ?        Ss   13:51   0:00 /usr/sbin/sshd
root      3314  0.0  0.0   2152   656 tty1     Ss+  13:51   0:00 /sbin/mingetty
root      3316  0.0  0.0   2152   632 tty2     Ss+  13:51   0:00 /sbin/mingetty
root      3318  0.0  0.0   2152   632 tty3     Ss+  13:51   0:00 /sbin/mingetty
root      3320  0.0  0.0   2152   628 tty4     Ss+  13:51   0:00 /sbin/mingetty
root      3327  0.0  0.0   2152   632 tty5     Ss+  13:51   0:00 /sbin/mingetty
root      3329  0.0  0.0   2152   632 tty6     Ss+  13:51   0:00 /sbin/mingetty
frank     3366  0.0  0.0   4260  1484 ?        Ss   13:51   0:00 /bin/sh /opt/kd
frank     3436  0.0  0.0   3804   484 ?        Ss   13:51   0:00 /usr/bin/gpg-ag
root      3477  0.0  0.0   1516   144 ?        S    13:51   0:00 start_kdeinit -
frank     3478  0.0  0.2  25540  6044 ?        Ss   13:51   0:00 kdeinit Running
frank     3481  0.0  0.1  24796  2756 ?        S    13:51   0:00 dcopserver [kde
frank     3483  0.0  0.2  28320  6200 ?        S    13:51   0:00 klauncher [kdei
frank     3485  0.0  0.5  32576 12236 ?        S    13:51   0:01 kded [kdeinit]
frank     3490  0.0  0.0   1652   368 ?        S    13:51   0:00 kwrapper ksmser
frank     3492  0.0  0.3  27808  8060 ?        S    13:51   0:00 ksmserver [kdei
frank     3493  0.0  0.6  26192 13764 ?        S    13:51   0:01 kwin -session 1
frank     3495  0.1  0.7  32640 14520 ?        S    13:51   0:01 kdesktop [kdein
frank     3497  0.1  0.7  38884 15692 ?        S    13:51   0:01 kicker [kdeinit
frank     3498  0.0  0.2  26356  4676 ?        S    13:51   0:00 kio_file [kdein
frank     3506  0.0  0.6  33296 13224 ?        S    13:52   0:00 kerry -session
frank     3507  0.0  0.1  14780  2704 ?        S    13:52   0:00 turboprint-moni
frank     3516  0.0  0.4  45768  9672 ?        S    13:52   0:00 knotify [kdeini
frank     3518  0.0  0.9  38908 18780 ?        S    13:52   0:00 konqueror [kdei
frank     3522  1.0  1.2  74160 26820 ?        SNl  13:52   0:15 beagled /usr/li
frank     3528  0.1  0.5  31196 10592 ?        S    13:52   0:02 kinternet [kdei
frank     3531  0.0  0.6  32108 13148 ?        S    13:52   0:00 kmix [kdeinit]
frank     3533  0.0  0.5  30744 10532 ?        S    13:52   0:00 kpowersave [kde
frank     3536  0.0  0.4  28812  9224 ?        S    13:52   0:00 klipper [kdeini
frank     3538  0.0  0.6  59672 13844 ?        Sl   13:52   0:00 opensuseupdater
frank     3544  0.0  0.0   3320   748 ?        S    13:52   0:00 dbus-launch --a
frank     3549  0.0  0.0   2492   620 ?        Ss   13:52   0:00 /bin/dbus-daemo
root      3611  0.0  0.0   3376   648 ?        Ss   13:52   0:00 /usr/sbin/smppp
root      3612  0.0  0.0   3048  1196 ?        Ss   13:52   0:00 /usr/sbin/pppd
frank     5028  0.1  0.8  59512 17156 ?        SNl  14:02   0:01 beagled-helper
frank     5058  0.0  0.0   3996  1380 ?        S    14:10   0:00 /bin/sh /usr/bi
frank     5063 19.6  6.0 270308 126308 ?       Sl   14:10   1:14 /usr/lib/firefo
frank     5065  0.0  0.1   5392  2400 ?        S    14:10   0:00 /usr/lib/GConf/
frank     5066  0.0  0.0   3996  1436 ?        S    14:10   0:00 /bin/sh /usr/bi
frank     5068  9.1  2.8 184728 58200 ?        Sl   14:10   0:34 /usr/lib/thunde
frank     5104 13.9  3.0 482008 63020 ?        Sl   14:10   0:50 /usr/lib/jvm/ja
frank     5522  2.1  0.7  34256 14708 ?        S    14:16   0:00 konsole [kdeini
frank     5523  0.1  0.1   4996  2404 pts/1    Ss   14:16   0:00 /bin/bash
root      5532  0.0  0.0   3796  1488 pts/1    S    14:16   0:00 su
root      5535  0.4  0.1   4748  2360 pts/1    S    14:16   0:00 bash
root      5546  0.0  0.0   2580   992 pts/1    R+   14:16   0:00 ps aux

Auch als root und trotzdem kommt die Fehlermeldung: Keine Berechtigung.

Code:

/var/log/boot.msg
bash: /var/log/boot.msg: Keine Berechtigung

Gandalf333 · 2 Juli 2008

/var/log/boot.msg

Code:

Inspecting /boot/System.map-2.6.25.5-1.1-pae
Loaded 28173 symbols from /boot/System.map-2.6.25.5-1.1-pae.
Symbols match kernel version 2.6.25.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.25.5-1.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
<4> BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
<4> BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>1150MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>Scan SMP from c0000000 for 1024 bytes.
<6>Scan SMP from c009fc00 for 1024 bytes.
<6>Scan SMP from c00f0000 for 65536 bytes.
<6>found SMP MP-table at [c00f5ec0] 000f5ec0
<7>Entering add_active_range(0, 0, 524016) 0 entries of 256 used
<4>Zone PFN ranges:
<4>  DMA             0 ->     4096
<4>  Normal       4096 ->   229376
<4>  HighMem    229376 ->   524016
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0:        0 ->   524016
<7>On node 0 totalpages: 524016
<7>  DMA zone: 32 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 4064 pages, LIFO batch:0
<7>  Normal zone: 1760 pages used for memmap
<7>  Normal zone: 223520 pages, LIFO batch:31
<7>  HighMem zone: 2301 pages used for memmap
<7>  HighMem zone: 292339 pages, LIFO batch:31
<7>  Movable zone: 0 pages used for memmap
<6>DMI 2.2 present.
<6>Using APIC driver default
<4>ACPI: RSDP 000F78B0, 0014 (r0 KT600 )
<4>ACPI: RSDT 7FEF3000, 002C (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<4>ACPI: FACP 7FEF3040, 0074 (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<4>ACPI: DSDT 7FEF30C0, 4908 (r1 KT600  AWRDACPI     1000 MSFT  100000E)
<4>ACPI: FACS 7FEF0000, 0040
<4>ACPI: APIC 7FEF7A00, 005A (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 6:8 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 80000000 (gap: 7ff00000:7ed00000)
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519923
<5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 resume=/dev/sda5 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 1827.881 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2067716k/2096064k available (1953k kernel code, 27096k reserved, 1676k data, 264k init, 1178560k highmem)
<6>virtual kernel memory layout:
<4>    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
<4>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
<4>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<4>      .init : 0xc0493000 - 0xc04d5000   ( 264 kB)
<4>      .data : 0xc02e845a - 0xc048b784   (1676 kB)
<4>      .text : 0xc0100000 - 0xc02e845a   (1953 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<4>Calibrating delay using timer specific routine.. 3659.48 BogoMIPS (lpj=7318970)
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized <NULL>
<6>AppArmor: Registered secondary security module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 18k freed
<6>ACPI: Core revision 20070126
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 608 Objects with 57 Devices 167 Methods 27 Regions
<4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<4>CPU0: AMD Athlon(tm) XP 2200+ stepping 00
<6>Total of 1 processors activated (3659.48 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<7>CPU0 attaching sched-domain:
<7> domain 0: span 00000000,00000000,00000000,00000001
<7>  groups: 00000000,00000000,00000000,00000001
<6>net_namespace: 548 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
<6>PCI: Using configuration type 1
<6>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 1 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:....................................................................
<4>Initialized 21/27 Regions 18/18 Fields 17/17 Buffers 12/21 Packages (617 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 61 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
<6>pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
<6>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
<6>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
<6>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
<6>ACPI: Power Resource [PFAN] (on)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>AppArmor: AppArmor Filesystem Enabled 
<4>ACPI: RTC can wake from S4
<6>system 00:00: iomem range 0xce400-0xcffff has been reserved
<6>system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
<6>system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:00: iomem range 0x7fef0000-0x7fefffff could not be reserved
<6>system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
<6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:00: iomem range 0x100000-0x7feeffff could not be reserved
<6>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
<6>system 00:02: ioport range 0x4000-0x407f has been reserved
<6>system 00:02: ioport range 0x5000-0x500f has been reserved
<6>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:03: ioport range 0x294-0x297 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: disabled.
<6>  MEM window: 0xdc000000-0xddffffff
<6>  PREFETCH window: 0x00000000d8000000-0x00000000dbffffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5347k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1215023134.656:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: VIA PCI bridge detected. Disabling DAC.
<7>pci 0000:01:00.0: Boot video device
<6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:dfa0
<6>vesafb: pmi: set display start = c00cdfe5, set palette = c00ce06a
<6>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 208945 bytes
<6>bootsplash: ...found (1280x1024, 220863 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<7>Switched to high resolution mode on CPU 0
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 264k freed
<6>Write protecting the kernel read-only data: 1432k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
<6>ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>ACPI: ACPI0007:00 is registered as cooling_device0
<6>ACPI: LNXTHERM:01 is registered as thermal_zone0
<6>ACPI: Thermal Zone [THRM] (59 C)
<6>No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_via 0000:00:11.1: version 0.3.3
<4>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
<4>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
<6>scsi0 : pata_via
<6>scsi1 : pata_via
<6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
<4>Marking TSC unstable due to: TSC halts in idle.
<6>ata1.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100
<6>ata1.00: 488397168 sectors, multi 16: LBA48 
<6>ata1.00: configured for UDMA/100
<6>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
<6>ata2.00: configured for UDMA/33
<5>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2514N  VF10 PQ: 0 ANSI: 5
<5>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
<6>ACPI: PNP0C0B:00 is registered as cooling_device1
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<4>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
<4>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<4>Driver 'sd' needs updating - please use bus_type methods
<6>hub 1-0:1.0: 2 ports detected
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<4> sda1 sda2 <<6>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>ehci_hcd 0000:00:10.3: EHCI Host Controller
<6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:10.3: irq 21, io mem 0xde000000
<4> sda5<6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<4> sda6<6>usb usb2: configuration #1 chosen from 1 choice
<4> sda7<6>hub 2-0:1.0: USB hub found
<4> sda8 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>hub 2-0:1.0: 6 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:10.3
<6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<3>hub 2-0:1.0: unable to enumerate USB device on port 3
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:10.1
<6>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<3>hub 2-0:1.0: unable to enumerate USB device on port 4
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.2
<3>hub 2-0:1.0: unable to enumerate USB device on port 5
<6>PM: Starting manual resume from disk
<6>usb 3-1: new low speed USB device using uhci_hcd and address 2
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>usb 3-1: New USB device found, idVendor=06a2, idProduct=0033
<6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 3-1: Product: USB Mouse
<6>usb 3-1: Manufacturer: Topro
<6>usb 3-2: new full speed USB device using uhci_hcd and address 3
<6>usb 3-2: configuration #1 chosen from 1 choice
<6>usb 3-2: New USB device found, idVendor=046d, idProduct=08da
<6>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usbcore: registered new interface driver hiddev
<6>usb 4-1: new full speed USB device using uhci_hcd and address 2
<6>usb 4-1: configuration #1 chosen from 1 choice
<6>usb 4-1: New USB device found, idVendor=0400, idProduct=1000
<6>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 4-1: Product: Merlin Scanner
<6>usb 4-1: Manufacturer: National Semiconductor
<6>input: Topro USB Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input2
<6>input,hidraw0: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:00:10.1-1
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Linux video capture interface: v2.00
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>Linux agpgart interface v0.103
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
<6>ACPI: Power Button (CM) [PWRB]
<6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>ACPI: Sleep Button (CM) [SLPB]
<6>agpgart: Detected VIA KT400/KT400A/KT600 chipset
<6>agpgart: AGP aperture is 128M @ 0xd0000000
<6>drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01
<6>usbcore: registered new interface driver QCM
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG 
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
<6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
<4>Driver 'sr' needs updating - please use bus_type methods
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
<4>via-rhine: Broken BIOS detected, avoid_D3 enabled.
<6>NET: Registered protocol family 23
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/Vimicro/zc3xx.h: [zc3xx_config:669] Find Sensor HV7131R(c)
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
<6>usbcore: registered new interface driver snd-usb-audio
<6>usbcore: registered new interface driver gspca
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: gspca driver 01.00.20 registered
<6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<6>parport_pc 00:0a: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
<4>ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
<4>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:11.5 to 64
<6>ppdev: user-space parallel port driver
<4>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
<4>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23
<6>eth0: VIA Rhine II at 0x1e800, 00:50:8d:57:b7:01, IRQ 23.
<6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
<6>Adding 2104444k swap on /dev/sda5.  Priority:-1 extents:1 across:2104444k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda8, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
<5>type=1505 audit(1215015958.299:2): operation="profile_load" name="/bin/ping" name2="default" pid=1331
<5>type=1505 audit(1215015958.499:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1341
<5>type=1505 audit(1215015958.683:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1342
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Jul  2 18:25:35 2008

Creating device nodes with udev
Trying manual resume from /dev/sda5
Invoking userspace resume from /dev/sda5
resume: libgcrypt version: 1.4.0
Trying manual resume from /dev/sda5
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 to appear:  ok
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 353952 (uid=1000, gid=100, mode=0100600, size=28700)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 353893 (uid=0, gid=0, mode=0100600, size=217016)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: clean, 136957/1313280 files, 2932760/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6

Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jul  2 20:25:46 2008

done
Starting udevd: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda6 is already mounted on /

Setting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part8: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part8: clean, 133906/14827520 files, 24641427/29653974 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda8 on /home type ext3 (rw,acl,user_xattr)
doneMounting securityfs on /sys/kernel/security done
<notice>killproc: kill(561,29)
Loading AppArmor profiles done
Fuse filesystem already availabledone
Mounting fuse control filesystemdone
Creating /var/log/boot.msg
doneCleaning up using /sbin/modify_resolvconf:
restored /etc/resolv.conf from /etc/resolv.conf.saved.by.pppd.dsl0
done
Activating remaining swap-devices in /etc/fstab...
doneSetting up hostname 'linux-69xu'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(561,3)

INIT: 
Boot logging started on /dev/tty1(/dev/console) at Wed Jul  2 18:26:01 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>Entering runlevel: 5


startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting D-Bus daemondone
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
Starting resource managerdone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
acpid: starting up


Starting acpid done
acpid: 0 rules loaded


<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneStarting Firewall Initialization (phase 1 of 2) done
Starting java.binfmt_misc done
Checking/updating CPU microcode unused
Initializing random number generatordone
TurboPrint daemon started
TP-Daemon Version 2.00-beta7
Debug Level set to 0
done
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    eth0      (DHCP) . . . . . . . . . . . . . . . no IP address yet... backgrounding. 
waiting
Waiting for mandatory devices:  eth0 __NSC__
3 2 1 0 
    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    eth0      dhcpcd is still waiting for data
waiting
    eth0      interface could not be set up until now
failed    dsl0      
    dsl0      Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde3 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
Starting Avahi daemon.done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
Starting Firewall Initialization (phase 2 of 2) <notice>checkproc: /opt/kde3/bin/kdm 3107
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: microcode.ctl
<notice>killproc: kill(1632,3)

Gandalf333 · 3 Juli 2008

Kann mir jemand weiterhelfen?

Gandalf333 · 20 Dez. 2008

Code:

/var/log/boot.msg
Inspecting /boot/System.map-2.6.25.18-0.2-pae
Loaded 28188 symbols from /boot/System.map-2.6.25.18-0.2-pae.
Symbols match kernel version 2.6.25.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.25.18-0.2-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-10-21 16:30:26 +0200
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
<4> BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
<4> BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>1150MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>Scan SMP from c0000000 for 1024 bytes.
<6>Scan SMP from c009fc00 for 1024 bytes.
<6>Scan SMP from c00f0000 for 65536 bytes.
<6>found SMP MP-table at [c00f5ec0] 000f5ec0
<7>Entering add_active_range(0, 0, 524016) 0 entries of 256 used
<4>Zone PFN ranges:
<4>  DMA             0 ->     4096
<4>  Normal       4096 ->   229376
<4>  HighMem    229376 ->   524016
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0:        0 ->   524016
<7>On node 0 totalpages: 524016
<7>  DMA zone: 32 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 4064 pages, LIFO batch:0
<7>  Normal zone: 1760 pages used for memmap
<7>  Normal zone: 223520 pages, LIFO batch:31
<7>  HighMem zone: 2301 pages used for memmap
<7>  HighMem zone: 292339 pages, LIFO batch:31
<7>  Movable zone: 0 pages used for memmap
<6>DMI 2.2 present.
<6>Using APIC driver default
<4>ACPI: RSDP 000F78B0, 0014 (r0 KT600 )
<4>ACPI: RSDT 7FEF3000, 002C (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<4>ACPI: FACP 7FEF3040, 0074 (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<4>ACPI: DSDT 7FEF30C0, 4908 (r1 KT600  AWRDACPI     1000 MSFT  100000E)
<4>ACPI: FACS 7FEF0000, 0040
<4>ACPI: APIC 7FEF7A00, 005A (r1 KT600  AWRDACPI 42302E31 AWRD        0)
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 6:8 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 80000000 (gap: 7ff00000:7ed00000)
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519923
<5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 resume=/dev/sda5 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 1827.881 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2067708k/2096064k available (1954k kernel code, 27108k reserved, 1679k data, 264k init, 1178560k highmem)
<6>virtual kernel memory layout:
<4>    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
<4>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
<4>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<4>      .init : 0xc0495000 - 0xc04d7000   ( 264 kB)
<4>      .data : 0xc02e8aea - 0xc048c784   (1679 kB)
<4>      .text : 0xc0100000 - 0xc02e8aea   (1954 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<4>Calibrating delay using timer specific routine.. 3659.48 BogoMIPS (lpj=7318963)
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized <NULL>
<6>AppArmor: Registered secondary security module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 18k freed
<6>ACPI: Core revision 20070126
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 608 Objects with 57 Devices 167 Methods 27 Regions
<4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<4>CPU0: AMD Athlon(tm) XP 2200+ stepping 00
<6>Total of 1 processors activated (3659.48 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<7>CPU0 attaching sched-domain:
<7> domain 0: span 00000000,00000000,00000000,00000001
<7>  groups: 00000000,00000000,00000000,00000001
<6>net_namespace: 548 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
<6>PCI: Using configuration type 1
<6>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 1 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:....................................................................
<4>Initialized 21/27 Regions 18/18 Fields 17/17 Buffers 12/21 Packages (617 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 61 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
<6>pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
<6>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
<6>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
<6>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
<6>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
<6>ACPI: Power Resource [PFAN] (on)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>AppArmor: AppArmor Filesystem Enabled 
<4>ACPI: RTC can wake from S4
<6>system 00:00: iomem range 0xce400-0xcffff has been reserved
<6>system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
<6>system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:00: iomem range 0x7fef0000-0x7fefffff could not be reserved
<6>system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
<6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:00: iomem range 0x100000-0x7feeffff could not be reserved
<6>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
<6>system 00:02: ioport range 0x4000-0x407f has been reserved
<6>system 00:02: ioport range 0x5000-0x500f has been reserved
<6>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:03: ioport range 0x294-0x297 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: disabled.
<6>  MEM window: 0xdc000000-0xddffffff
<6>  PREFETCH window: 0x00000000d8000000-0x00000000dbffffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5349k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1229801597.648:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: VIA PCI bridge detected. Disabling DAC.
<7>pci 0000:01:00.0: Boot video device
<6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:dfa0
<6>vesafb: pmi: set display start = c00cdfe5, set palette = c00ce06a
<6>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 208945 bytes
<6>bootsplash: ...found (1280x1024, 220863 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<7>Switched to high resolution mode on CPU 0
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 264k freed
<6>Write protecting the kernel read-only data: 1436k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
<6>ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>ACPI: ACPI0007:00 is registered as cooling_device0
<6>ACPI: LNXTHERM:01 is registered as thermal_zone0
<6>ACPI: Thermal Zone [THRM] (58 C)
<6>No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_via 0000:00:11.1: version 0.3.3
<4>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
<4>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
<6>scsi0 : pata_via
<6>scsi1 : pata_via
<6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
<4>Marking TSC unstable due to: TSC halts in idle.
<6>ata1.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100
<6>ata1.00: 488397168 sectors, multi 16: LBA48 
<6>ata1.00: configured for UDMA/100
<6>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
<6>ata2.00: configured for UDMA/33
<5>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2514N  VF10 PQ: 0 ANSI: 5
<5>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
<6>ACPI: PNP0C0B:00 is registered as cooling_device1
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<4>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
<4>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<6>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>usb usb1: configuration #1 chosen from 1 choice
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>hub 1-0:1.0: USB hub found
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>hub 1-0:1.0: 2 ports detected
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<6>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>ehci_hcd 0000:00:10.3: EHCI Host Controller
<6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:10.3: irq 21, io mem 0xde000000
<6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 6 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.25.18-0.2-pae ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:10.3
<6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:10.1
<6>usb 2-2: new high speed USB device using ehci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb 2-2: New USB device found, idVendor=04a9, idProduct=1729
<6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 2-2: Product: MX700 series
<6>usb 2-2: Manufacturer: Canon
<6>usb 2-2: SerialNumber: 11B39C
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.2
<3>hub 2-0:1.0: unable to enumerate USB device on port 3
<6>PM: Starting manual resume from disk
<3>hub 2-0:1.0: unable to enumerate USB device on port 6
<6>usb 3-1: new full speed USB device using uhci_hcd and address 2
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>usb 3-1: New USB device found, idVendor=046d, idProduct=08da
<6>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 4-2: new low speed USB device using uhci_hcd and address 2
<6>usb 4-2: configuration #1 chosen from 1 choice
<6>usb 4-2: New USB device found, idVendor=046d, idProduct=c018
<6>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 4-2: Product: USB Optical Mouse
<6>usb 4-2: Manufacturer: Logitech
<6>usbcore: registered new interface driver hiddev
<6>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input2
<6>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.2-2
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Linux agpgart interface v0.103
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>Linux video capture interface: v2.00
<6>agpgart: Detected VIA KT400/KT400A/KT600 chipset
<6>agpgart: AGP aperture is 128M @ 0xd0000000
<6>usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1729
<6>usblp1: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x04A9 pid 0x1729
<6>usbcore: registered new interface driver usblp
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>Initializing USB Mass Storage driver...
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>scsi2 : SCSI emulation for USB Mass Storage devices
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
<6>ACPI: Power Button (CM) [PWRB]
<6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>ACPI: Sleep Button (CM) [SLPB]
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG 
<4>nvidia: module license 'NVIDIA' taints kernel.
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
<6>NET: Registered protocol family 23
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<5>scsi 2:0:0:0: Direct-Access     Canon    MX700 series     1080 PQ: 0 ANSI: 2
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
<5>sd 2:0:0:0: Attached scsi generic sg2 type 0
<7>usb-storage: device scan complete
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/Vimicro/zc3xx.h: [zc3xx_config:669] Find Sensor HV7131R(c)
<6>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
<4>via-rhine: Broken BIOS detected, avoid_D3 enabled.
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
<6>usbcore: registered new interface driver gspca
<4>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
<4>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23
<6>/usr/src/packages/BUILD/gspcav1-20071224/obj/pae/gspca_core.c: gspca driver 01.00.20 registered
<6>eth0: VIA Rhine II at 0x1e400, 00:50:8d:57:b7:01, IRQ 23.
<6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
<6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
<7>quickcam [32.306494]: ----------LOADING QUICKCAM MODULE------------
<7>quickcam [32.306502]: struct quickcam size: 4764
<6>usbcore: registered new interface driver quickcam
<6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<6>parport_pc 00:0a: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
<6>usbcore: registered new interface driver snd-usb-audio
<6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<4>NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.07  Wed Jul  2 12:17:43 PDT 2008
<6>ppdev: user-space parallel port driver
<6>Adding 2104444k swap on /dev/sda5.  Priority:-1 extents:1 across:2104444k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda8, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
<5>type=1505 audit(1229798021.977:2): operation="profile_load" name="/bin/ping" name2="default" pid=1339
<5>type=1505 audit(1229798022.085:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1347
<5>type=1505 audit(1229798022.185:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1350
<5>type=1505 audit(1229798022.269:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1357
<5>type=1505 audit(1229798022.357:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1364
<5>type=1505 audit(1229798022.441:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1372
<5>type=1505 audit(1229798022.529:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1382
<5>type=1505 audit(1229798022.613:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1392
<5>type=1505 audit(1229798022.721:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1397
<5>type=1505 audit(1229798022.797:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1405
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sat Dec 20 19:33:18 2008

Creating device nodes with udev
Trying manual resume from /dev/sda5
Invoking userspace resume from /dev/sda5
resume: libgcrypt version: 1.4.0
Trying manual resume from /dev/sda5
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 to appear:  ok
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181213 (uid=1000, gid=100, mode=0100600, size=2105)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181207 (uid=1000, gid=100, mode=0100600, size=100628)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181205 (uid=1000, gid=100, mode=0100600, size=40408)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181200 (uid=1000, gid=100, mode=0100600, size=2091)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181220 (uid=1000, gid=100, mode=0100600, size=2117)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 428013 (uid=1000, gid=100, mode=0100600, size=20500)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181228 (uid=1000, gid=100, mode=0100600, size=30913)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 428010 (uid=1000, gid=100, mode=0100600, size=149504)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181222 (uid=1000, gid=100, mode=0100600, size=12419)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181227 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181226 (uid=1000, gid=100, mode=0100600, size=35126)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181199 (uid=1000, gid=100, mode=0100600, size=120533)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181210 (uid=1000, gid=100, mode=0100600, size=35896)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181218 (uid=1000, gid=100, mode=0100600, size=24695)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181211 (uid=1000, gid=100, mode=0100600, size=27736)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181225 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181224 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181223 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181219 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181217 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181215 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181214 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181208 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181204 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181203 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181197 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 181195 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: Clearing orphaned inode 427971 (uid=0, gid=0, mode=0100600, size=217016)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6: clean, 163784/1313280 files, 1210568/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sat Dec 20 20:33:29 2008

done
Starting udevd: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda6 is already mounted on /

Setting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part8: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part8: clean, 261695/14827520 files, 15999330/29653974 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda8 on /home type ext3 (rw,acl,user_xattr)
$LogFile indicates unclean shutdown (0, 1)
Failed to mount '/dev/sda1': Die Operation wird nicht unterstützt
Mount is denied because NTFS is marked to be in use. Choose one action:

Choice 1: If you have Windows then disconnect the external devices by
          clicking on the 'Safely Remove Hardware' icon in the Windows
          taskbar then shutdown Windows cleanly.

Choice 2: If you don't have Windows then you can use the 'force' option for
          your own responsibility. For example type on the command line:

            mount -t ntfs-3g /dev/sda1 /windows/C -o force

    Or add the option to the relevant row in the /etc/fstab file:

            /dev/sda1 /windows/C ntfs-3g force 0 0
failedFuse filesystem already availabledone
Mounting fuse control filesystemdone
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Cleaning up using /sbin/modify_resolvconf:
restored /etc/resolv.conf from /etc/resolv.conf.saved.by.pppd.dsl0
done
Creating /var/log/boot.msg
<notice>killproc: kill(570,29)
doneConfiguring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneActivating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'linux-648q'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(570,3)

INIT: 
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 20 19:33:44 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>Entering runlevel: 5


startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up


<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting acpid done
acpid: 1 rule loaded


Starting D-Bus daemondone
<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
Starting ConsoleKitdone
Starting Firewall Initialization (phase 1 of 2) done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneStarting java.binfmt_misc done
Checking/updating CPU microcode unused
Initializing random number generatordone
TurboPrint daemon started
TP-Daemon Version 2.06-1
Debug Level set to 0
done
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    eth0      (DHCP) . . . . . . . . . . . . . . . no IP address yet... backgrounding. 
waiting
Waiting for mandatory devices:  eth0 __NSC__
4 3 1 0 
    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    eth0      dhcpcd is still waiting for data
waiting
    eth0      interface could not be set up until now
failed    dsl0      
    dsl0      Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting SSH daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde3 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
Starting Avahi daemon.done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Starting Privoxy<notice>checkproc: /opt/kde3/bin/kdm 3084
done
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
Starting spamd <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d -c -L -r /var/run/spamd.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2514NS08BJ1ELA05492-part6 _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
failed
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network spamd
Skipped services in runlevel 5: microcode.ctl
<notice>killproc: kill(1651,3)

System friert ein

Moderator