Tumbleweed + 2 Monitore

[susejunky]

Hallo wschmock,

... mit 15.2 funktioniert der 2. Monitor. ist am HDMI-Anschluss.
Ergebnisse:

k4l:/ # hwinfo --monitor

k4l:/ # xrandr --listmonitors
Can't open display 

k4l:/ # xrandr --listproviders
Can't open display

diese Ergebnisse verstehe ich nicht.

Ich hätte erwartet, dass zumindest ein Monitor hier angezeigt wird?!

Bitte schließe beide Monitore an, starte openSUSE Leap 15.2 (nach Deinen Angaben werden damit beide Monitore erkannt) und führe nochmals

hwinfo --monitor

xrandr --listmonitors

und

xrandr --listproviders

aus und zeige die Ergebnisse.

Viele Grüße

susejunky

 

[wschmock]

hallo, hier das Ergebnis von 15.2:

k4l:/ # hwinfo --monitor
23: None 00.0: 10002 LCD Monitor                                
  [Created at monitor.125]
  Unique ID: rdCR.K4oNTG7uZp5
  Parent ID: VCu0.zFadiA64Sf4
  Hardware Class: monitor
  Model: "HITACHI W240D DVI"
  Vendor: HIT "HITACHI"
  Device: eisa 0x7d03 "W240D DVI"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1600x1200@60Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1920x1200@60Hz
  Size: 520x320 mm
  Year of Manufacture: 2007
  Week of Manufacture: 30
  Detailed Timings #0:
     Resolution: 1920x1200
     Horizontal: 1920 1968 2000 2080 (+48 +80 +160) -hsync
       Vertical: 1200 1203 1209 1235 (+3 +9 +35) +vsync
    Frequencies: 154.00 MHz, 74.04 kHz, 59.95 Hz
  Year of Manufacture: 2007
  Week of Manufacture: 30
  Detailed Timings #1:
     Resolution: 1600x1200
     Horizontal: 1600 1664 1856 2160 (+64 +256 +560) +hsync
       Vertical: 1200 1201 1204 1250 (+1 +4 +50) +vsync
    Frequencies: 162.00 MHz, 75.00 kHz, 60.00 Hz
  Driver Info #0:
    Max. Resolution: 1920x1200
    Vert. Sync Range: 59-76 Hz
    Hor. Sync Range: 30-83 kHz
    Bandwidth: 154 MHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (VGA compatible controller)

24: None 01.0: 10002 LCD Monitor
  [Created at monitor.125]
  Unique ID: wkFv.0FqAi13D+M7
  Parent ID: VCu0.zFadiA64Sf4
  Hardware Class: monitor
  Model: "MD20433"
  Vendor: MED 
  Device: eisa 0x36b3 "MD20433"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@67Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@56Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 832x624@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1600x1200@60Hz
  Resolution: 1280x960@60Hz
  Resolution: 1360x768@60Hz
  Resolution: 1920x1080@60Hz
  Size: 521x293 mm
  Year of Manufacture: 2014
  Week of Manufacture: 0
  Detailed Timings #0:
     Resolution: 1920x1080
     Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync
       Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync
    Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz
  Year of Manufacture: 2014
  Week of Manufacture: 0
  Detailed Timings #1:
     Resolution: 1360x768
     Horizontal: 1360 1424 1536 1792 (+64 +176 +432) +hsync
       Vertical:  768  771  777  795 (+3 +9 +27) +vsync
    Frequencies: 85.50 MHz, 47.71 kHz, 60.02 Hz
  Driver Info #0:
    Max. Resolution: 1920x1080
    Vert. Sync Range: 55-76 Hz
    Hor. Sync Range: 29-81 kHz
    Bandwidth: 148 MHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (VGA compatible controller)
k4l:/ # xrandr --listmonitors
Can't open display 
k4l:/ # xrandr --listproviders
Can't open display 
k4l:/ #

 

[susejunky]

Hallo wschmock,

... hier das Ergebnis von 15.2:

k4l:/ # xrandr --listmonitors
Can't open display 
k4l:/ # xrandr --listproviders
Can't open display 
k4l:/ #

führe die beiden xrandr-Befehle bitte NICHT in einer virtuellen Konsole (z.B. STRG+ALT+F1) sondern in einer grafischen Konsole (z.B. KDE-Menü -> System -> Konsole) aus und zeige dann die Ergebnisse (für openSUSE Tumbleweed).

Viele Grüße

susejunky