• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Gelöst Tumbleweed, Bootprobleme

Phoenix7

Hacker
Hallo zusammen,

ich habe mehrere Systeme parallel installiert (u.a. 2* Tumbleweed) mein hauptsächliche genutzte Distribution. Beim Updaten dieser hat sich das Update jeweils beim Kernel aufgehängt. Dann musste ich das Update abbrechen (bei beiden Installationen). Beim reboot kommen folgende Fehlermeldungen:
1.
Code:
error: ../../grub-core/fs/btfs.c:2156:file '/e/boot/vmlinuz-6.1.4-1-default' not found.
error: ../../grub-core/loader/i386/efi/linux.c:168:you need to load the kernel first.

Press any key to continue...

bei der zweiten Installation das gleiche aber zusätzlich noch:
2.
Code:
Failed to boot both defaultand fallback entries.

Ich habe schon versucht selber herumzudoktoren. Normalerweise funktioniert ein Update über mit Hilfe des Tumbleweed-Installationmediums. Auch hier hängen sich die beiden Installationen auf. Ich hatte neulich auch im BIOS Boot-Einstellungen verändert. Kann das auch einen Einfluss darauf haben/gehabt haben?

Mein System:
Tumbleweed - immer aktuell gehalten
AMD Ryzen 7
Bootloader GRUB2
Auf einer SSD habe ich Windows installiert, das ich aber nur äußerst selten nutze

Für sachdienliche Hilfe wäre ich sehr dankbar!

Beste Grüße
 
Zuletzt bearbeitet:
OP
P

Phoenix7

Hacker
ja, das hatte ich schon versucht. Leider ohne Erfolg.

Beim update hatte er sich damals bei der Meldung:
Code:
Installieren: patterns-base-minimal_base-20200505-41.1.x86_64 ................................................................................................................................................................[fertig]
dracut: Executing: /usr/bin/dracut -f /boot/initrd-6.3.2-1-default 6.3.2-1-default
dracut: dracut module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: 35network-legacy: Could not find any command of 'dhclient wicked'!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: 35network-legacy: Could not find any command of 'dhclient wicked'!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: ostree ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including module: suse-initrd ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   sha256
dracut: Files:                    1388
dracut: Linked:                   2 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 99 files
dracut: Saved:                    352,16 KiB
dracut: Duration:                 0.195812 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut:  resume=UUID=624fe589-6b29-424b-9f13-6e8efbbe2e3a
dracut:  root=UUID=aa429fe1-46bc-4323-b0b4-7de169e3a872 rootfstype=ext4 rootflags=rw,relatime
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/boot/initrd-6.3.2-1-default' ***
dracut: *** Creating initramfs image file '/boot/initrd-6.3.2-1-default' done ***
Option --add-kernel not available for grub2.
aufgehängt.
 
OP
P

Phoenix7

Hacker
Ich konnte mit "Super Grub Disk2" in eines der Systeme booten. Beim updaten kommt nun folgende Fehlermeldung:

Code:
Überprüfung auf Dateikonflikte läuft: ....................................................................................................................................................................................................[fertig]
error: can't create transaction lock on /usr/lib/sysimage/rpm/.rpm.lock (Resource temporarily unavailable)
( 1/36) Installieren: kernel-firmware-amdgpu-20230427-35.1.noarch ........................................................................................................................................................................[Fehler]
Installation von kernel-firmware-amdgpu-20230427-35.1.noarch fehlgeschlagen:
Fehler: Subprocess failed. Error: RPM fehlgeschlagen: Kommando mit Status 1 beendet.

Weder wiederholen noch ignorieren bringt den Prozess weiter.

Dann habe ich ein:
Code:
# rm .rpm.lock
# rpmdb --rebuilddb

im entsprechendem Verzeichnis ausgeführt. Das Update läuft nun wieder an, hängt aber wieder an der gleichen Stelle:
Code:
Installieren: kernel-devel-6.3.3-1.1.g1237d35.noarch ...........................................................................................................................................................................[fertig]
dracut: Executing: /usr/bin/dracut -f /boot/initrd-6.3.3-1.g1237d35-default 6.3.3-1.g1237d35-default
dracut: dracut module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
dracut: dracut module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: haveged ***
dracut: *** Including module: ostree ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including module: suse-initrd ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   sha256
dracut: Files:                    1421
dracut: Linked:                   1 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 99 files
dracut: Saved:                    690 B
dracut: Duration:                 0.004888 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut: rd.driver.pre=btrfs
dracut:  resume=UUID=624fe589-6b29-424b-9f13-6e8efbbe2e3a
dracut:  root=UUID=aa318300-c46e-454d-b102-e27b1b837a8d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache,subvolid=256,subvol=/@,subvol=@
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/boot/initrd-6.3.3-1.g1237d35-default' ***
dracut: *** Creating initramfs image file '/boot/initrd-6.3.3-1.g1237d35-default' done ***
Option --add-kernel not available for grub2.
 
Zuletzt bearbeitet von einem Moderator:
OP
P

Phoenix7

Hacker
Code:
#lsblk -s
NAME       MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0        7:0    0  81,3M  1 loop /snap/gtk-common-themes/1534
                                     /snap/gtk-common-themes/1534
loop1        7:1    0  91,7M  1 loop /snap/gtk-common-themes/1535
                                     /snap/gtk-common-themes/1535
loop2        7:2    0   432K  1 loop /snap/ktube-media-downloader/10
                                     /snap/ktube-media-downloader/10
loop3        7:3    0 518,3M  1 loop /snap/nightmayr-kf5-qt-5-15-2-core20/26
                                     /snap/nightmayr-kf5-qt-5-15-2-core20/26
loop5        7:5    0  55,6M  1 loop /snap/core18/2745
                                     /snap/core18/2745
loop6        7:6    0  55,6M  1 loop /snap/core18/2721
                                     /snap/core18/2721
loop7        7:7    0     4K  1 loop /snap/bare/5
                                     /snap/bare/5
loop8        7:8    0  63,3M  1 loop /snap/core20/1879
                                     /snap/core20/1879
loop9        7:9    0  63,5M  1 loop /snap/core20/1891
                                     /snap/core20/1891
loop10       7:10   0 258,7M  1 loop /snap/qt551/41
                                     /snap/qt551/41
loop11       7:11   0 520,4M  1 loop /snap/nightmayr-kf5-qt-5-15-2-core20/30
                                     /snap/nightmayr-kf5-qt-5-15-2-core20/30
loop12       7:12   0 363,7M  1 loop /snap/retroarch/2005
                                     /snap/retroarch/2005
loop13       7:13   0 258,7M  1 loop /snap/qt551/42
                                     /snap/qt551/42
loop14       7:14   0 367,7M  1 loop /snap/retroarch/1839
                                     /snap/retroarch/1839
loop15       7:15   0  53,2M  1 loop /snap/snapd/19122
                                     /snap/snapd/19122
loop16       7:16   0  53,2M  1 loop /snap/snapd/18933
                                     /snap/snapd/18933
loop17       7:17   0  36,9M  1 loop /snap/yuzu/654
                                     /snap/yuzu/654
loop18       7:18   0  36,9M  1 loop /snap/yuzu/655
                                     /snap/yuzu/655
sda1         8:1    0 931,5G  0 part
└─sda        8:0    0 931,5G  0 disk
sdb1         8:17   0   5,5T  0 part
└─sdb        8:16   0  10,9T  0 disk
sdb2         8:18   0   5,5T  0 part
└─sdb        8:16   0  10,9T  0 disk
sdc1         8:33   0  80,1G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdc2         8:34   0  80,1G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdc3         8:35   0  80,1G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdc4         8:36   0 122,1G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdc5         8:37   0  80,1G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdc7         8:39   0    16G  0 part
└─sdc        8:32   0 931,5G  0 disk
sdd1         8:49   0   5,5T  0 part
└─sdd        8:48   0  10,9T  0 disk
sdd2         8:50   0   5,5T  0 part
└─sdd        8:48   0  10,9T  0 disk
sde1         8:65   0 127,6G  0 part
└─sde        8:64   0   9,1T  0 disk
sde3         8:67   0   3,5T  0 part /home
└─sde        8:64   0   9,1T  0 disk
sde4         8:68   0   5,5T  0 part
└─sde        8:64   0   9,1T  0 disk
sdf1         8:81   1   201M  0 part
└─sdf        8:80   1  58,6G  0 disk
sdf2         8:82   1   265M  0 part
└─sdf        8:80   1  58,6G  0 disk
sdg1         8:97   0   4,6M  0 part
└─sdg        8:96   0   3,6T  0 disk
sdg2         8:98   0   4,3G  0 part
└─sdg        8:96   0   3,6T  0 disk
sr0         11:0    1  1024M  0 rom 
nvme0n1p1  259:1    0   498M  0 part /boot/efi
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p2  259:2    0 261,3G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p3  259:3    0  89,4G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p4  259:4    0     4G  0 part [SWAP]
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p5  259:5    0 146,5G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p6  259:6    0   100G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p7  259:7    0    50G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p8  259:8    0 198,5G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p9  259:9    0  27,9G  0 part
└─nvme0n1  259:0    0 953,9G  0 disk
nvme0n1p10 259:10   0  75,7G  0 part /var
│                                    /usr/local
│                                    /tmp
│                                    /srv
│                                    /root
│                                    /opt
│                                    /boot/grub2/x86_64-efi
│                                    /snap
│                                    /
└─nvme0n1  259:0    0 953,9G  0 disk

Es gibt aber eine efi-Partition. Ich fürchte da hat sich etwas verheddert. Wie kann ich das wieder bereinigen?

Vielen Dank schon mal!
 
OP
P

Phoenix7

Hacker
Code:
 #ls -al /usr/lib/sysimage/rpm/
insgesamt 483880
drwxr-xr-x 1 root root        56 20. Mai 15:06 .
drwxr-xr-x 1 root root         6 20. Mai 15:06 ..
-rw-r--r-- 1 root root 143196160 20. Mai 15:06 Index.db
-rw-r--r-- 1 root root 352291248 20. Mai 15:06 Packages.db
-rw-r--r-- 1 root root         0 20. Mai 15:06 .rpm.lock
localhost:/home/... #
 
OP
P

Phoenix7

Hacker
Das Update Problem scheint gelöst zu sein. Ich habe eine Bereinigung durchgeführt:
Code:
zypper packages --unneeded | grep ^i|cut -d '|' -f3|xargs zypper rm --clean-deps --no-confirm

Jetzt würde ich gerne noch den Bootloader reparieren. Hilfe ist sehr willkommen.
 

Sauerland

Ultimate Guru
Dann installier dir doch den Kernel noch einmal.....

Oder einfach Yast---System----Bootloader aufrufen, dort die Zeit um 1 Sekunde verstellen und danach ok klicken.....

Code:
dracut -f
um die initrd neu zu generieren kann auch nicht schaden......
 
OP
P

Phoenix7

Hacker
Code:
dracut -f
ist durchgelaufen ohne Fehler.

Yast---System----Bootloader - lädt leider nicht (eingefroren). Das lässt mich ahnen, da liegt noch etwas im argen.
 
OP
P

Phoenix7

Hacker
leider auch etwas zu früh gefreut:

Code:
#sudo zypper purge-kernels
Installierte Pakete werden gelesen...

Säuberung von veralteten Kerneln wird vorbereitet...
Konfiguration: latest,latest-1,running
Kernel Release läuft: 6.2.12-1-default
Kernel arch läuft: x86_64

Paketabhängigkeiten werden aufgelöst...

Die folgenden 3 Pakete werden GELÖSCHT:
  kernel-default-6.3.1-4.1.g78ee477 kernel-default-devel-6.3.1-1.1 kernel-devel-6.3.1-1.1

3 zu entfernende Pakete.
Nach dem Vorgang werden 351,4 MiB freigegeben.
Fortfahren? [j/n/v/...? zeigt alle Optionen] (j): j
warning: file 6.3.1-4.g78ee477-default: remove failed: No such file or directory
Option --remove-kernel not available for grub2.

hängt wieder. :rolleyes:

Bei einer Neuinstallation der Kernel-Bestandteile hängt er dann bei "UEFI shim loader".
 
Zuletzt bearbeitet:
OP
P

Phoenix7

Hacker
läuft nun mittlerweile ohne Probleme durch. Allerdings kann ich den Bootloader über Yast immer noch nicht neu konfigurieren. Jezt hängt er nicht mehr beim starten, sondern beim schreiben.
 
OP
P

Phoenix7

Hacker
Ich habe es gelöst, in dem ich parallel ein Open Suse Leap 15.5 installiert habe und dabei den existierenden Bootloader gelöscht und mit der Installation neu aufgesetzt habe. Dann habe ich nano etc/fstab bei den jeweiligen Distributionen editiert.

Danke für Eure Unterstützung!
 
Oben