Hallo,
ich habe seit einem Upgrade von OpenSuSE 11.4 auf OpenSuSE 12.2 das Problem, dass mein Rechner nicht mehr hochfährt.
Ich habe so ziemlich alles probiert, was bisher als Lösung für das Problem vorgeschlagen wurde, u.a. Downgrade auf OpenSuSE 12.1, Boot-Partition vom RAID losgelöst, grub/grub2/lilo, Root-Disk mit UUID, by-id und Devicenamen.
Es macht alles keinen Unterschied, der Fehler bleibt überall derselbe. Während des Boot-Vorganges sehe ich:
"Waiting for device /dev/NAME-MEINES-ROOT-DEVICES to appear... .... could not find device"
Aktuell habe ich grub2 installiert.
Ich freue mich über jeden Hinweis!
Danke,
Fabio.
PS: Neuinstallation ist leider keine Lösung...
Ausgaben:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
fdisk -l
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000f34a8
Device Boot Start End Blocks Id System
/dev/sdc1 1 295 2368512 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdc3 * 296 182401 1462766445 fd Linux raid autodetect
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005fb16
Device Boot Start End Blocks Id System
/dev/sdb1 1 295 2368512 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb3 * 296 182401 1462766445 fd Linux raid autodetect
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0008ad86
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 256000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 32 295 2112512 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3 296 182401 1462766445 83 Linux
Disk /dev/md2: 2995.7 GB, 2995745456128 bytes
2 heads, 4 sectors/track, 731383168 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk identifier: 0x00000000
Disk /dev/md2 doesn't contain a valid partition table
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
parted -l
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Model: ATA ST31500341AS (scsi)
Disk /dev/sda: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 263MB 262MB primary ext2 boot
2 263MB 2426MB 2163MB primary linux-swap(v1)
3 2426MB 1500GB 1498GB primary ext4
Model: ATA ST31500341AS (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 2426MB 2425MB primary ext4
3 2426MB 1500GB 1498GB primary boot, raid
Model: ATA ST31500341AS (scsi)
Disk /dev/sdc: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 2426MB 2425MB primary ext4
3 2426MB 1500GB 1498GB primary boot, raid
Model: Linux Software RAID Array (md)
Disk /dev/md2: 2996GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 2996GB 2996GB ext3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
/etc/fstab
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/disk/by-id/scsi-35000c5002070c703-part1 /boot ext2 acl,user_xattr 1 2
/dev/disk/by-id/scsi-35000c5002070c703-part2 swap swap defaults 0 0
/dev/disk/by-id/scsi-35000c5002070dabd-part1 /tmp ext4 acl,user_xattr 1 2
/dev/disk/by-id/scsi-35000c5002070c703-part3 / ext4 acl,user_xattr 1 2
/dev/md2 /storage ext3 defaults 0 0
/dev/disk/by-id/scsi-35000c500206ee685-part1 /srv ext4 acl,user_xattr 1 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
lspci
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7500 LE] (rev a1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)
ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
...
ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05)
...
ich habe seit einem Upgrade von OpenSuSE 11.4 auf OpenSuSE 12.2 das Problem, dass mein Rechner nicht mehr hochfährt.
Ich habe so ziemlich alles probiert, was bisher als Lösung für das Problem vorgeschlagen wurde, u.a. Downgrade auf OpenSuSE 12.1, Boot-Partition vom RAID losgelöst, grub/grub2/lilo, Root-Disk mit UUID, by-id und Devicenamen.
Es macht alles keinen Unterschied, der Fehler bleibt überall derselbe. Während des Boot-Vorganges sehe ich:
"Waiting for device /dev/NAME-MEINES-ROOT-DEVICES to appear... .... could not find device"
Aktuell habe ich grub2 installiert.
Ich freue mich über jeden Hinweis!
Danke,
Fabio.
PS: Neuinstallation ist leider keine Lösung...
Ausgaben:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
fdisk -l
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000f34a8
Device Boot Start End Blocks Id System
/dev/sdc1 1 295 2368512 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdc3 * 296 182401 1462766445 fd Linux raid autodetect
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005fb16
Device Boot Start End Blocks Id System
/dev/sdb1 1 295 2368512 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb3 * 296 182401 1462766445 fd Linux raid autodetect
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0008ad86
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 256000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 32 295 2112512 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3 296 182401 1462766445 83 Linux
Disk /dev/md2: 2995.7 GB, 2995745456128 bytes
2 heads, 4 sectors/track, 731383168 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk identifier: 0x00000000
Disk /dev/md2 doesn't contain a valid partition table
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
parted -l
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Model: ATA ST31500341AS (scsi)
Disk /dev/sda: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 263MB 262MB primary ext2 boot
2 263MB 2426MB 2163MB primary linux-swap(v1)
3 2426MB 1500GB 1498GB primary ext4
Model: ATA ST31500341AS (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 2426MB 2425MB primary ext4
3 2426MB 1500GB 1498GB primary boot, raid
Model: ATA ST31500341AS (scsi)
Disk /dev/sdc: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 2426MB 2425MB primary ext4
3 2426MB 1500GB 1498GB primary boot, raid
Model: Linux Software RAID Array (md)
Disk /dev/md2: 2996GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 2996GB 2996GB ext3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
/etc/fstab
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/disk/by-id/scsi-35000c5002070c703-part1 /boot ext2 acl,user_xattr 1 2
/dev/disk/by-id/scsi-35000c5002070c703-part2 swap swap defaults 0 0
/dev/disk/by-id/scsi-35000c5002070dabd-part1 /tmp ext4 acl,user_xattr 1 2
/dev/disk/by-id/scsi-35000c5002070c703-part3 / ext4 acl,user_xattr 1 2
/dev/md2 /storage ext3 defaults 0 0
/dev/disk/by-id/scsi-35000c500206ee685-part1 /srv ext4 acl,user_xattr 1 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
lspci
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7500 LE] (rev a1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)
ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
...
ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05)
...