Brumgabrasch
Newbie
Das Notebook meines Bruders (Dell Latitude D505) hat ein Diskettenlaufwerk, das man entweder über usb oder anstelle des DVD-Laufwerkes betreiben kann). Nach der Installation von Suse, wobei das Diskettenlaufwerk über USB angeschlossen war, wird jedoch das Laufwerk nirgends unter Geräte angezeigt. Suseplugger zeigt es jedoch unter Diskette an. Wenn man jedoch im suseplugger auf einrichten klickt, startet das Partitionierungsmodul von yast, dass das Diskettenlaufwerk auch nicht anzeigt.
Ich bin noch ein relativer anfänger mit Linux, deshalb brauche ich unbedingt eure hilfe!
Ich denke dass Problem liegt darin, dass es das Laufwerk nicht automatisch mountet.
Wie kann ich die Ursache für mein Problem finden und dieses Beheben.
P.S. dmesg ergibt folgendes:
ich denke die enscheidende Information daraus ist folgendes:
sda:<3>ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
ldm_validate_privheads(): Cannot find PRIVHEAD 1.
unable to read partition table
Ich bin noch ein relativer anfänger mit Linux, deshalb brauche ich unbedingt eure hilfe!
Ich denke dass Problem liegt darin, dass es das Laufwerk nicht automatisch mountet.
Wie kann ich die Ursache für mein Problem finden und dieses Beheben.
P.S. dmesg ergibt folgendes:
Code:
usb 2-1: new full speed USB device using address 2
usb 2-1: Product: USB Floppy Drive
usb 2-1: Manufacturer: Sony
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 2880 512-byte hdwr sectors (1 MB)
sda: Write Protect is off
sda: Mode Sense: 00 46 94 00
sda: assuming drive cache: write through
sda:<3>ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
ldm_validate_privheads(): Cannot find PRIVHEAD 1.
unable to read partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg4 at scsi0, channel 0, id 0, lun 4, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg5 at scsi0, channel 0, id 0, lun 5, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg6 at scsi0, channel 0, id 0, lun 6, type 31
scsi: unknown device type 31
Vendor: SONY Model: USB-FDU Rev: 5.01
Type: Unknown ANSI SCSI revision: 02
Attached scsi generic sg7 at scsi0, channel 0, id 0, lun 7, type 31
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ich denke die enscheidende Information daraus ist folgendes:
sda:<3>ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
ldm_validate_privheads(): Cannot find PRIVHEAD 1.
unable to read partition table