Hallo zusammen,
ich habe momentan mit meinem automatischen rsnapshot-Backup das Problem, dass der Sicherungsdatenräger immer voll läuft. Eigentlich sollte das nicht passieren es handelt sich um eine 3TB Platte, es müssen aber "nur" 1,5TB gesichert werden. Mir ist bewusst das durch inkrementelle Änderungen das Datenvolumen durchaus ansteigen kann aber "Pi * Daumen" würde ich sagen in diesem Fall sollte der Platz ausreichen. Wichtig ist das die Konfiguration von rsnapshot 3 Rotationen, daily, weekly, und monthly vorsieht. Ich kann mir mehrere Ursachen für das Problem vorstellen bin mir aber nicht ganz sicher welche davon zutreffen kann:
Weiß jemand ob eine meiner Vermutungen zutrifft und rsnapshot sich tatsächlich so verhält, wenn ja gibt es eine Möglichkeit das Verhalten zu ändern?
Das OS ist OpenSuse 13.1.
Die rsnapshot-Version: 1.3.1
Die rsync-Version: 3.1.0 protocol version 31
Der Vollständigkeit halber noch die config für rsnapshot:
ich habe momentan mit meinem automatischen rsnapshot-Backup das Problem, dass der Sicherungsdatenräger immer voll läuft. Eigentlich sollte das nicht passieren es handelt sich um eine 3TB Platte, es müssen aber "nur" 1,5TB gesichert werden. Mir ist bewusst das durch inkrementelle Änderungen das Datenvolumen durchaus ansteigen kann aber "Pi * Daumen" würde ich sagen in diesem Fall sollte der Platz ausreichen. Wichtig ist das die Konfiguration von rsnapshot 3 Rotationen, daily, weekly, und monthly vorsieht. Ich kann mir mehrere Ursachen für das Problem vorstellen bin mir aber nicht ganz sicher welche davon zutreffen kann:
- die Rotationen daily, weekly und monthly sichern jeweils den kompletten Datenbestand, d.h. es gibt z.B. keinen symlink von einer Datei im monthly backup, auch wenn exakt die selbe datei bereits im weekly vorhanden ist.
- falls identische dateien in der Verzeichnisstruktur verschoben werden, z.B.:
Gestern:
/home/user/grossedatei.dat
Heute:
/home/user/grossedatei.dat -> /home/user/newdir/grossedatei.dat
kopiert rsnapshot die Datei trotzdem erneut, statt einfach einen symlink unter dem neuen Pfad zu setzen.
Weiß jemand ob eine meiner Vermutungen zutrifft und rsnapshot sich tatsächlich so verhält, wenn ja gibt es eine Möglichkeit das Verhalten zu ändern?
Das OS ist OpenSuse 13.1.
Die rsnapshot-Version: 1.3.1
Die rsync-Version: 3.1.0 protocol version 31
Der Vollständigkeit halber noch die config für rsnapshot:
Code:
#################################################
# rsnapshot.conf - rsnapshot configuration file #
#################################################
# #
# PLEASE BE AWARE OF THE FOLLOWING RULES: #
# #
# This file requires tabs between elements #
# #
# Directories require a trailing slash: #
# right: /home/ #
# wrong: /home #
# #
#################################################
#######################
# CONFIG FILE VERSION #
#######################
config_version 1.2
###########################
# SNAPSHOT ROOT DIRECTORY #
###########################
# All snapshots will be stored under this root directory.
#
snapshot_root /mnt/backup_home/
# If no_create_root is enabled, rsnapshot will not automatically create the
# snapshot_root directory. This is particularly useful if you are backing
# up to removable media, such as a FireWire or USB drive.
#
no_create_root 1
#################################
# EXTERNAL PROGRAM DEPENDENCIES #
#################################
# LINUX USERS: Be sure to uncomment "cmd_cp". This gives you extra features.
# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.
#
# See the README file or the man page for more details.
#
cmd_cp /usr/bin/cp
# uncomment this to use the rm program instead of the built-in perl routine.
#
cmd_rm /usr/bin/rm
# rsync must be enabled for anything to work. This is the only command that
# must be enabled.
#
cmd_rsync /usr/bin/rsync
# Uncomment this to enable remote ssh backups over rsync.
#
cmd_ssh /usr/bin/ssh
# Comment this out to disable syslog support.
#
cmd_logger /usr/bin/logger
# Uncomment this to specify the path to "du" for disk usage checks.
# If you have an older version of "du", you may also want to check the
# "du_args" parameter below.
#
cmd_du /usr/bin/du
# Uncomment this to specify the path to rsnapshot-diff.
#
cmd_rsnapshot_diff /usr/bin/rsnapshot-diff
# Specify the path to a script (and any optional arguments) to run right
# before rsnapshot syncs files
#
#cmd_preexec /path/to/preexec/script
# Specify the path to a script (and any optional arguments) to run right
# after rsnapshot syncs files
#
#cmd_postexec /path/to/postexec/script
#########################################
# BACKUP INTERVALS #
# Must be unique and in ascending order #
# i.e. hourly, daily, weekly, etc. #
#########################################
#retain hourly 1
retain daily 7
retain weekly 5
retain monthly 24
############################################
# GLOBAL OPTIONS #
# All are optional, with sensible defaults #
############################################
# Verbose level, 1 through 5.
# 1 Quiet Print fatal errors only
# 2 Default Print errors and warnings only
# 3 Verbose Show equivalent shell commands being executed
# 4 Extra Verbose Show extra verbose information
# 5 Debug mode Everything
#
#verbose 2
verbose 4
# Same as "verbose" above, but controls the amount of data sent to the
# logfile, if one is being used. The default is 3.
#
#loglevel 3
loglevel 4
# If you enable this, data will be written to the file you specify. The
# amount of data written is controlled by the "loglevel" parameter.
#
logfile /var/log/rsnapshot.home
# If enabled, rsnapshot will write a lockfile to prevent two instances
# from running simultaneously (and messing up the snapshot_root).
# If you enable this, make sure the lockfile directory is not world
# writable. Otherwise anyone can prevent the program from running.
#
lockfile /var/run/rsnapshot.home.pid
# Default rsync args. All rsync commands have at least these options set.
#
#rsync_short_args -a
rsync_short_args -ac
#rsync_long_args --delete --numeric-ids --relative --delete-excluded
# ssh has no args passed by default, but you can specify some here.
#
#ssh_args -p 22
# Default arguments for the "du" program (for disk space reporting).
# The GNU version of "du" is preferred. See the man page for more details.
# If your version of "du" doesn't support the -h flag, try -k flag instead.
#
du_args -csh
# If this is enabled, rsync won't span filesystem partitions within a
# backup point. This essentially passes the -x option to rsync.
# The default is 0 (off).
#
#one_fs 0
# The include and exclude parameters, if enabled, simply get passed directly
# to rsync. If you have multiple include/exclude patterns, put each one on a
# separate line. Please look up the --include and --exclude options in the
# rsync man page for more details on how to specify file name patterns.
#
#include ???
#include ???
#exclude ???
#exclude ???
exclude Recycled/
exclude Trash/
exclude lost+found/
exclude .gvfs/
exclude video/
exclude user/vms/
exclude user/backup/reactor/
exclude user2/backup/
exclude backup/
# The include_file and exclude_file parameters, if enabled, simply get
# passed directly to rsync. Please look up the --include-from and
# --exclude-from options in the rsync man page for more details.
#
#include_file /path/to/include/file
#exclude_file /path/to/exclude/file
# If your version of rsync supports --link-dest, consider enable this.
# This is the best way to support special files (FIFOs, etc) cross-platform.
# The default is 0 (off).
#
link_dest 1
# When sync_first is enabled, it changes the default behaviour of rsnapshot.
# Normally, when rsnapshot is called with its lowest interval
# (i.e.: "rsnapshot hourly"), it will sync files AND rotate the lowest
# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,
# and all interval calls simply rotate files. See the man page for more
# details. The default is 0 (off).
#
#sync_first 0
# If enabled, rsnapshot will move the oldest directory for each interval
# to [interval_name].delete, then it will remove the lockfile and delete
# that directory just before it exits. The default is 0 (off).
#
use_lazy_deletes 0
# Number of rsync re-tries. If you experience any network problems or
# network card issues that tend to cause ssh to crap-out with
# "Corrupted MAC on input" errors, for example, set this to a non-zero
# value to have the rsync operation re-tried
#
#rsync_numtries 0
###############################
### BACKUP POINTS / SCRIPTS ###
###############################
# LOCALHOST
backup /home/ host.domain.local/
#backup /etc/ localhost/
#backup /usr/local/ localhost/
#backup /var/log/rsnapshot localhost/
#backup /etc/passwd localhost/
#backup /home/foo/My Documents/ localhost/
#backup /foo/bar/ localhost/ one_fs=1, rsync_short_args=-urltvpog
#backup_script /usr/local/bin/backup_pgsql.sh localhost/postgres/
# EXAMPLE.COM
#backup_script /bin/date "+ backup of example.com started at %c" unused1
#backup root@example.com:/home/ example.com/ +rsync_long_args=--bwlimit=16,exclude=core
#backup root@example.com:/etc/ example.com/ exclude=mtab,exclude=core
#backup_script ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql" unused2
#backup root@example.com:/var/db/dump/ example.com/
#backup_script /bin/date "+ backup of example.com ended at %c" unused9
# CVS.SOURCEFORGE.NET
#backup_script /usr/local/bin/backup_rsnapshot_cvsroot.sh rsnapshot.cvs.sourceforge.net/
# RSYNC.SAMBA.ORG
#backup rsync://rsync.samba.org/rsyncftp/ rsync.samba.org/rsyncftp/