• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

w-Lan treiber für Realtek RTL8178b

hallo Community,

bei meinem toshiba Satellite Laptop (genaue bezeichnung kann bei Bedarf nachgereicht werden) funktioniert das W-Lan Modul unter Opensuse 11.4 nicht.

ich habe das W-Lan Modul unter Win 7 ausgelesen, es handelt sich um ein: Realtek RTL8178b.

Funktioniert diese W-Lan modul unter Linux?
Wenn ja, welchen Treiber muss für Opensuse 11.4 installieren. (Gibt es den in den Opensuse repos?)

Vielen dank im Voraus.
 
Genaueres kann man sagen, wenn du nähere Informationen lieferst:
http://www.linux-club.de/viewtopic.php?f=19&t=93338
Sollte aber eigentlich mit rtl8187 funktionieren.
 
Diese Infos..

37: USB 00.0: 0282 WLAN controller
Model: "Realtek WLAN controller"
Vendor: usb 0x0bda "Realtek Semiconductor Corp."
Device: usb 0x8197
Driver: "rtl8187"
Driver Modules: "rtl8187"
Device File: wlan0
Link detected: no
Driver Status: rtl8187 is active
Driver Activation Cmd: "modprobe rtl8187"
 

tomm.fa

.Linux Club Aushilfsadministrator
Teammitglied
Eigentlich müsste die Ausgabe vom Script ein klein wenig länger sein. Wo ist der Rest geblieben?
 
Wie man sieht ist der vermutete Treiber aktiv.
Wenn du jetzt den Rest vom Fest noch lieferst kann man ggf. was genaueres dazu sagen.
 
Hallo,

ich muss das Thema leider wieder aufgreifen.. Bin immer noch nicht weiter gekommen, das Skript funktioniert bzw. finde ich rgendwie nicht mehr..

Vorallem einen "zd1211" W-Lan Stick (USB) Anschluss bekomme ich ebenfalls nicht zum laufen... (Hat früher mal bei Linux 9 oder so problemlos funktioniert)

Wie bekomme ich den Informationen über mein W-Lan Modul?

(Oder vielleicht sogar nur über mein Laptop)
 

tomm.fa

.Linux Club Aushilfsadministrator
Teammitglied
http://www.linux-tips-and-tricks.de/quickstart
http://www.linux-tips-and-tricks.de/overview
 
So hab jetzt zumindest Informationen zu Laptop über "Hardware Lister" rausbekommen:

Code:
description: Notebook
    product: Satellite L500 (012345678912345678912345678)
    vendor: TOSHIBA
    version: PSLS0E-01D01JGR
    serial: X9286220K
    width: 64 bits
    capabilities: smbios-2.5 dmi-2.5 vsyscall32
    configuration: boot=oem-specific chassis=notebook family=ABCDEFGHIJKLMNOPQRSTUVWXYZ sku=012345678912345678912345678 uuid=9716D


Und Info's zum W-Lan Modul (??):

Code:
usb:0 DISABLED
                   description: Wireless interface
                   product: RTL8187B Wireless Adapter
                   vendor: Manufacturer_Realtek
                   physical id: 2
                   bus info: usb@1:2
                   logical name: wlan0
                   version: 2.00
                   serial: 00e04c000001
                   capabilities: usb-2.00 ethernet physical wireless
                   configuration: broadcast=yes driver=rtl8187 driverversion=3.7.10-1.16-desktop firmware=N/A link=no maxpower=500

Und hier Infos zum USB-WLan Stick:

Code:
*-usb:0 DISABLED
                   description: Wireless interface
                   product: USB2.0 WLAN
                   vendor: ZyDAS
                   physical id: 2
                   bus info: usb@2:2
                   logical name: wlan1
                   version: 48.10
                   serial: 00:11:f6:7f:4f:c3
                   capabilities: usb-2.00 ethernet physical wireless
                   configuration: broadcast=yes driver=zd1211rw driverversion=3.7.10-1.16-desktop firmware=N/A link=no maxpower=500mA multicast=yes speed=480Mbit/s wireless=IEEE 802.11bg

Leider helfen mir die Infos nicht wirklich weiter.

Weder über networkmanager noch über die Traditionelle Methode mit YAST (iup oder os) bekomme ich die Dinger zum Laufen.

Kann wer helfen?
 
In diesem Beitrag wurde schon mehrmals auf framp´s Script hingewiesen und noch nicht einmal die Textdatei gepostet.

Wenn Du Probleme mit dem Script hast, sag die einfach, sowas wie hier hilft weder Dir noch Helfern:
Code:
Bin immer noch nicht weiter gekommen, das Skript funktioniert bzw. finde ich rgendwie nicht mehr..

PS:
tomm.fa schrieb:
http://www.linux-tips-and-tricks.de/quickstart
http://www.linux-tips-and-tricks.de/overview
 
das gibt collectNWData nun aus..
wich weis ja noch nicht mal welche Netzwerktopologie ich auswählen soll bzw. welche SSID?

(Sollte je eigentlich auch egal sein, erstmal müssen die W-Lan-Geräte funktionieren. Dann kann ich nach verfürbaren Netzzwerken suchen...

Code:
collectNWData.sh V0.6.13a (Rev: 1.370, Build: 2013/09/06 20:58:18 UTC)

--- Soll das Ergebnisfile in einem internationalen Forum gepostet werden (j/[n])?n 
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (1) Kabellose Verbindung (WLAN)
--- (2) Kabelgebundene Verbindung
--- Bitte mit 1-2 anworten:1

--- Welche Netzwerktopologie liegt vor?
--- (1) WLAN access point <---> LinuxClient
--- (2) WLAN HW router <---> LinuxClient
--- (3) WLAN access point <---> LinuxRouter <---> LinuxClient
--- (4) WLAN HW router <---> LinuxRouter <---> LinuxClient
--- Bitte mit 1-4 anworten:1

--- Bitte die WLAN SSID zu der verbunden werden soll eingeben (Wird in der Ausgabedatei maskiert):

--- Bitte die WLAN SSID zu der verbunden werden soll eingeben (Wird in der Ausgabedatei maskiert):**

--- NWCollect sammelt Netzwerkkonfigurationsinformationen in Datei collectNWData.txt ...
                                               
--- NWEliza untersucht das System nach häufigen Netzwerkkonfigurationsfehlern ...

!!! CND0120E: Die Netzwerkkarte wlan1 hat keine IP Adresse
!!! CND0120E: Die Netzwerkkarte wlan0 hat keine IP Adresse
!!! CND0290E: Keine Netzwerkkonfiguration für Interface wlan1 gefunden
!!! CND0490E: Kein Accesspoint mit der benutzen SSID auf dem Interface wlan1 gefunden
!!! CND0490E: Kein Accesspoint mit der benutzen SSID auf dem Interface wlan0 gefunden
!!! CND0380E: Es wurden keine WLANs am Interface wlan1 gefunden. Die Hardware und/oder Treiber ist nicht richtig konfiguriert
!!! CND0380E: Es wurden keine WLANs am Interface wlan0 gefunden. Die Hardware und/oder Treiber ist nicht richtig konfiguriert
!!! CND0320E: WLAN ist mit dem Hardware oder Software Switch ausgeschaltet
!!! CND0460I: Analyse von WLAN_firmware_problems nur möglich wenn das Script als root aufegrufen wird                                                                                                
!!! CND0230I: IPV6 ist eingeschaltet                                                                                                                                                                 
!!! CND0310W: Klassische Netzwerkkonfiguration mit ifup wurde entdeckt. Die Konfiguration mit networkmanager ist einfacher                                                                           
!!! CND0450W: WLAN Schlüsselmaskierung ist nicht vollständig auf dieser Distribution getestet. Bitte das Ausgabefile collectNWData.txt nach sichtbaren WLAN Schlüsseln absuchen und manuell maskieren
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailliertere Hinweise                                                                                                                       
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden können.                                                                                                  
                                                                                                                                                                                                     
--- Wenn eigene Lösungsversuche erfolglos waren dann den Inhalt der Datei collectNWData.txt im Netz ablegen                                                                                          
--- (Links siehe http://www.linux-tips-and-tricks.de/CND_UPL)                                                                                                                                        
--- und dann der nopaste Link im bevorzugten Linux Forum posten.
 
Ok ich glaube jetzt kommen wir der Sache näher...

anbei die CollectNWData.txt:

Code:
==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/lsb-release
/etc/os-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
NAME=openSUSE
VERSION="12.3 (Dartmouth)"
VERSION_ID="12.3"
PRETTY_NAME="openSUSE 12.3 (Dartmouth) (x86_64)"
ID=opensuse
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:opensuse:12.3"
openSUSE 12.3 (x86_64)
VERSION = 12.3
CODENAME = Dartmouth
===== uname -a ===================================================================================================
Linux linux-xxj6.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
NAME='RTL8101E/RTL8102E PCI Express Fast Ethernet controller'
STARTMODE='auto'
USERCONTROL='no'
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
NAME='Realtek WLAN controller'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK=@@@@@@
--- /etc/sysconfig/network/ifcfg-wlanusb
BOOTPROTO='dhcp'
NAME='USB2.0 WLAN'
STARTMODE='hotplug'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='no'
WIRELESS_WPA_PSK=@@@@@@
===== ping tests =================================================================================================
Ping of 173.194.35.176 OK
Ping of www.google.com OK
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.42.129
===== cat /etc/hosts =============================================================================================
127.0.0.1	localhost
===== (route -n && route -A inet6 -n) | egrep "(eth|ath|ra|wlan|dsl|ppp)" ========================================
===== ifconfig (filtered for eth|wlan|ra|ath|dsl|ppp) ============================================================
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
===== lspci ======================================================================================================
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:ff00]
	Kernel driver in use: r8169
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 002: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter
Bus 001 Device 003: ID 064e:d104 Suyin Corp. 
Bus 002 Device 002: ID 1582:6003 Fiberline WL-430U 802.11bg
Bus 002 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 004: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 005: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 002 Device 007: ID 12d1:1039 Huawei Technologies Co., Ltd. Ideos (tethering mode)
===== hwinfo (filtered) ==========================================================================================
28: PCI e00.0: 0200 Ethernet controller
  Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  SubVendor: pci 0x1179 "Toshiba America Info Systems"
  SubDevice: pci 0xff00 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: no
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
32: USB 00.0: 0291 USB Host-to-Host link
  Model: "Android"
  Vendor: usb 0x12d1 "Android"
  Device: usb 0x1039 "Android"
  Driver: "rndis_host"
  Driver Modules: "rndis_host"
  Device File: usb0
  Link detected: yes
    Driver Status: rndis_host is active
    Driver Activation Cmd: "modprobe rndis_host"
40: USB 00.0: 0282 WLAN controller
  Model: "Realtek WLAN controller"
  Vendor: usb 0x0bda "Realtek Semiconductor Corp."
  Device: usb 0x8197 
  Driver: "rtl8187"
  Driver Modules: "rtl8187"
  Device File: wlan0
  Link detected: no
    Driver Status: rtl8187 is active
    Driver Activation Cmd: "modprobe rtl8187"
45: USB 00.0: 0282 WLAN controller
  Model: "ZyDAS USB2.0 WLAN"
  Vendor: usb 0x1582 "ZyDAS"
  Device: usb 0x6003 "USB2.0 WLAN"
  Driver: "zd1211rw"
  Driver Modules: "zd1211rw"
  Device File: wlan1
  Link detected: no
    Driver Status: zd1211rw is active
    Driver Activation Cmd: "modprobe zd1211rw"
===== lsmod (filtered) ===========================================================================================
| ac              | af_packet       | arc4            | cdc_ether       | cfg80211         |
| coretemp        | drm             | drm_kms_helper  | eeprom_93cx6    | i2c_algo_bit     |
| i2c_i801        | i915            | ip_tables       | lpc_ich         | mac80211         |
| mfd_core        | microcode       | mperf           | r8169           | rfkill           |
| rndis_host      | rtl8187         | scsi_dh         | scsi_dh_alua    | scsi_dh_emc      |
| scsi_dh_hp_sw   | scsi_dh_rdac    | sg              | sparse_keymap   | sr_mod           |
| usbnet          | usb_storage     | wmi             | zd1211rw        |
===== iwconfig ===================================================================================================
eth0      no wireless extensions.
wlan1     IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
wlan0     IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
===== ls /lib/firmware/*.{fw,ucode,bin} ==========================================================================
| agere_ap_fw.bin         | agere_sta_fw.bin        | ar5523.bin              | ar7010.fw                |
| ar7010_1_1.fw           | ar9170-1.fw             | ar9170-2.fw             | ar9271.fw                |
| ath3k-1.fw              | bnx2x-e1-4.8.53.0.fw    | bnx2x-e1-5.2.13.0.fw    | bnx2x-e1-5.2.7.0.fw      |
| bnx2x-e1h-4.8.53.0.fw   | bnx2x-e1h-5.2.13.0.fw   | bnx2x-e1h-5.2.7.0.fw    | carl9170-1.fw            |
| dvb-fe-xc5000-1.6.114.fw| dvb-usb-dib0700-1.20.fw | dvb-usb-terratec-h5-drxk.fw| f2255usb.bin             |
| htc_7010.fw             | htc_9271.fw             | intelliport2.bin        | iwlwifi-100-5.ucode      |
| iwlwifi-1000-3.ucode    | iwlwifi-1000-5.ucode    | iwlwifi-105-6.ucode     | iwlwifi-135-6.ucode      |
| iwlwifi-2000-6.ucode    | iwlwifi-2030-6.ucode    | iwlwifi-3160-7.ucode    | iwlwifi-3945-2.ucode     |
| iwlwifi-4965-1.ucode    | iwlwifi-4965-2.ucode    | iwlwifi-5000-1.ucode    | iwlwifi-5000-2.ucode     |
| iwlwifi-5000-5.ucode    | iwlwifi-5150-2.ucode    | iwlwifi-6000-4.ucode    | iwlwifi-6000g2a-5.ucode  |
| iwlwifi-6000g2a-6.ucode | iwlwifi-6000g2b-5.ucode | iwlwifi-6000g2b-6.ucode | iwlwifi-6050-4.ucode     |
| iwlwifi-6050-5.ucode    | iwlwifi-7260-7.ucode    | lbtf_usb.bin            | lgs8g75.fw               |
| mt7650.bin              | mts_mt9234mu.fw         | mts_mt9234zba.fw        | phanfw.bin               |
| ql2100_fw.bin           | ql2200_fw.bin           | ql2300_fw.bin           | ql2322_fw.bin            |
| ql2400_fw.bin           | ql2500_fw.bin           | rp2.fw                  | rt2561.bin               |
| rt2561s.bin             | rt2661.bin              | rt2860.bin              | rt2870.bin               |
| rt3070.bin              | rt3071.bin              | rt3090.bin              | rt3290.bin               |
| rt73.bin                | s2250.fw                | s2250_loader.fw         | tlg2300_firmware.bin     |
| tr_smctr.bin            | usbdux_firmware.bin     | usbduxfast_firmware.bin | usbduxsigma_firmware.bin |
| v4l-cx231xx-avcore-01.fw| v4l-cx23418-apu.fw      | v4l-cx23418-cpu.fw      | v4l-cx23418-dig.fw       |
| v4l-cx23885-avcore-01.fw| v4l-cx25840.fw          | vntwusb.fw              |
===== iwlist scanning (filtered) =================================================================================
No WLANs found
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:NO networkmanager:YES nm-applet:NO
===== ===== egrep -i "^[^#].*(persistent|networkmanager)" /etc/sysconfig/network/config ==========================
FORCE_PERSISTENT_NAMES=""
===== rfkill list wifi ===========================================================================================
0: phy1: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes
===== Actual date for bias of following greps ====================================================================
21:45:45 2013-11-30
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
/var/log/messages:2013-11-29T22:56:09.442318+01:00 linux-xxj6 kernel: [   10.931692] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T08:38:46.963856+01:00 linux-xxj6 kernel: [   11.322981] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T11:04:44.538606+01:00 linux-xxj6 kernel: [   11.919782] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T15:49:56.032877+01:00 linux-xxj6 kernel: [   11.861336] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T19:58:38.385819+01:00 linux-xxj6 kernel: [   11.308136] Registered led device: rtl8187-phy0::radio
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
[   11.308136] Registered led device: rtl8187-phy0::radio
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==========
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|blacklist' ===============
==================================================================================================================
*** NWElizaStates V0.6.13a
IF:eth0 IM:2 IF:wlan1 IM:1 IF:wlan0 IM:1 DI:3 AP:0 FALON:1 NIC:1 cNiC:2:1 NIC:1 cNiC:3:1 NI:2 cNI:2 NIW:wlan0-1 CM:0 IP6:1 KM:0 WLW:0 RTDT:SuSE GUI:0 UID:0
[/code]
 

Jägerschlürfer

Moderator
Teammitglied
da Script hast du aber ausgeführt, als du verbunden warst mit Kabel, oder? Kannst du das Script nochmals ausführen, wenn du nicht mit dem Kabel verbunden bist?

Da bei dir noch eine weitere WLan Karte gesteckt ist, würde ich diese erst einmal entfernen um nicht zu viel irritierende Angaben zu bekommen,.... Sprich eins nach dem anderen,...

Eine WLAN Karte scheint wohl auch noch hardwaremäßig ausgeschalten zu sein,....
 

tomm.fa

.Linux Club Aushilfsadministrator
Teammitglied
Jägerschlürfer schrieb:
da Script hast du aber ausgeführt, als du verbunden warst mit Kabel, oder?
Denke eher über Händie, oder so.

Jägerschlürfer schrieb:
Da bei dir noch eine weitere WLan Karte gesteckt ist, würde ich diese erst einmal entfernen um nicht zu viel irritierende Angaben zu bekommen,.... Sprich eins nach dem anderen,...
Zwei über USB angeschlossene Geräte:
Bus 001 Device 002: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter

Bus 002 Device 002: ID 1582:6003 Fiberline WL-430U 802.11bg

Für das zweite Gerät muss wohl noch das Paket zd1211-firmware installiert werden.
 
Hallo,

korrekt bisher war mein Handy meine WLan-Verbindung (funktioniert genial einfach Handy mit dem Kabel über USB anschließen; Tethering anhaken und los gehts)

Hab ich nun aber ausgeschalten und das Skript erneut ausgeführ.
Den ZD1211-WLan-Stick habe ich hier abgezogen gehabt.

(Ist das integrierte WLan-Modul Hard-. bzw. Softwaremäßig deaktiviert ?! (Mit der Tastenkombination kann ich es aber nicht aktivieren. Die LED leuchtet auch nicht)

Wie gesagt hier das Skript, nur mit dem integrierten W-Lan-Modul:

Code:
collectNWData.sh V0.6.13a (Rev: 1.370, Build: 2013/09/06 20:58:18 UTC)

--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (1) Kabellose Verbindung (WLAN)

--- Welche Netzwerktopologie liegt vor?
--- (1) WLAN access point <---> LinuxClient

--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1

--- NWEliza untersucht das System nach häufigen Netzwerkkonfigurationsfehlern ...

!!! CND0120E: Die Netzwerkkarte wlan0 hat keine IP Adresse
!!! CND0490E: Kein Accesspoint mit der benutzen SSID auf dem Interface wlan0 gefunden
!!! CND0380E: Es wurden keine WLANs am Interface wlan0 gefunden. Die Hardware und/oder Treiber ist nicht richtig konfiguriert
!!! CND0320E: WLAN ist mit dem Hardware oder Software Switch ausgeschaltet
!!! CND0460I: Analyse von WLAN_firmware_problems nur möglich wenn das Script als root aufegrufen wird
!!! CND0230I: IPV6 ist eingeschaltet
!!! CND0310W: Klassische Netzwerkkonfiguration mit ifup wurde entdeckt. Die Konfiguration mit networkmanager ist einfacher
!!! CND0450W: WLAN Schlüsselmaskierung ist nicht vollständig auf dieser Distribution getestet. Bitte das Ausgabefile collectNWData.txt nach sichtbaren WLAN Schlüsseln absuchen und manuell maskieren
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailliertere Hinweise 
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden können.

--- Wenn eigene Lösungsversuche erfolglos waren dann den Inhalt der Datei collectNWData.txt im Netz ablegen
--- (Links siehe http://www.linux-tips-and-tricks.de/CND_UPL) 
--- und dann der nopaste Link im bevorzugten Linux Forum posten.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/lsb-release
/etc/os-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
NAME=openSUSE
VERSION="12.3 (Dartmouth)"
VERSION_ID="12.3"
PRETTY_NAME="openSUSE 12.3 (Dartmouth) (x86_64)"
ID=opensuse
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:opensuse:12.3"
openSUSE 12.3 (x86_64)
VERSION = 12.3
CODENAME = Dartmouth
===== uname -a ===================================================================================================
Linux linux-xxj6.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
NAME='RTL8101E/RTL8102E PCI Express Fast Ethernet controller'
STARTMODE='auto'
USERCONTROL='no'
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
NAME='Realtek WLAN controller'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK=@@@@@@
--- /etc/sysconfig/network/ifcfg-wlanusb
BOOTPROTO='dhcp'
NAME='USB2.0 WLAN'
STARTMODE='hotplug'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='no'
WIRELESS_WPA_PSK=@@@@@@
===== ping tests =================================================================================================
Ping of 173.194.35.180 failed
ping: unknown host www.google.com
Ping of www.google.com failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
===== cat /etc/hosts =============================================================================================
127.0.0.1	localhost
===== (route -n && route -A inet6 -n) | egrep "(eth|ath|ra|wlan|dsl|ppp)" ========================================
===== ifconfig (filtered for eth|wlan|ra|ath|dsl|ppp) ============================================================
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
===== lspci ======================================================================================================
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:ff00]
	Kernel driver in use: r8169
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 002: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter
Bus 001 Device 003: ID 064e:d104 Suyin Corp. 
Bus 002 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 004: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
===== hwinfo (filtered) ==========================================================================================
28: PCI e00.0: 0200 Ethernet controller
  Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  SubVendor: pci 0x1179 "Toshiba America Info Systems"
  SubDevice: pci 0xff00 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: no
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
38: USB 00.0: 0282 WLAN controller
  Model: "Realtek WLAN controller"
  Vendor: usb 0x0bda "Realtek Semiconductor Corp."
  Device: usb 0x8197 
  Driver: "rtl8187"
  Driver Modules: "rtl8187"
  Device File: wlan0
  Link detected: no
    Driver Status: rtl8187 is active
    Driver Activation Cmd: "modprobe rtl8187"
===== lsmod (filtered) ===========================================================================================
| ac              | af_packet       | arc4            | cdc_ether       | cfg80211         |
| coretemp        | drm             | drm_kms_helper  | eeprom_93cx6    | i2c_algo_bit     |
| i2c_i801        | i915            | ip_tables       | lpc_ich         | mac80211         |
| mfd_core        | microcode       | mperf           | r8169           | rfkill           |
| rndis_host      | rtl8187         | scsi_dh         | scsi_dh_alua    | scsi_dh_emc      |
| scsi_dh_hp_sw   | scsi_dh_rdac    | sg              | sparse_keymap   | sr_mod           |
| usbnet          | usb_storage     | wmi             | zd1211rw        |
===== iwconfig ===================================================================================================
eth0      no wireless extensions.
wlan0     IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
===== ls /lib/firmware/*.{fw,ucode,bin} ==========================================================================
| agere_ap_fw.bin         | agere_sta_fw.bin        | ar5523.bin              | ar7010.fw                |
| ar7010_1_1.fw           | ar9170-1.fw             | ar9170-2.fw             | ar9271.fw                |
| ath3k-1.fw              | bnx2x-e1-4.8.53.0.fw    | bnx2x-e1-5.2.13.0.fw    | bnx2x-e1-5.2.7.0.fw      |
| bnx2x-e1h-4.8.53.0.fw   | bnx2x-e1h-5.2.13.0.fw   | bnx2x-e1h-5.2.7.0.fw    | carl9170-1.fw            |
| dvb-fe-xc5000-1.6.114.fw| dvb-usb-dib0700-1.20.fw | dvb-usb-terratec-h5-drxk.fw| f2255usb.bin             |
| htc_7010.fw             | htc_9271.fw             | intelliport2.bin        | iwlwifi-100-5.ucode      |
| iwlwifi-1000-3.ucode    | iwlwifi-1000-5.ucode    | iwlwifi-105-6.ucode     | iwlwifi-135-6.ucode      |
| iwlwifi-2000-6.ucode    | iwlwifi-2030-6.ucode    | iwlwifi-3160-7.ucode    | iwlwifi-3945-2.ucode     |
| iwlwifi-4965-1.ucode    | iwlwifi-4965-2.ucode    | iwlwifi-5000-1.ucode    | iwlwifi-5000-2.ucode     |
| iwlwifi-5000-5.ucode    | iwlwifi-5150-2.ucode    | iwlwifi-6000-4.ucode    | iwlwifi-6000g2a-5.ucode  |
| iwlwifi-6000g2a-6.ucode | iwlwifi-6000g2b-5.ucode | iwlwifi-6000g2b-6.ucode | iwlwifi-6050-4.ucode     |
| iwlwifi-6050-5.ucode    | iwlwifi-7260-7.ucode    | lbtf_usb.bin            | lgs8g75.fw               |
| mt7650.bin              | mts_mt9234mu.fw         | mts_mt9234zba.fw        | phanfw.bin               |
| ql2100_fw.bin           | ql2200_fw.bin           | ql2300_fw.bin           | ql2322_fw.bin            |
| ql2400_fw.bin           | ql2500_fw.bin           | rp2.fw                  | rt2561.bin               |
| rt2561s.bin             | rt2661.bin              | rt2860.bin              | rt2870.bin               |
| rt3070.bin              | rt3071.bin              | rt3090.bin              | rt3290.bin               |
| rt73.bin                | s2250.fw                | s2250_loader.fw         | tlg2300_firmware.bin     |
| tr_smctr.bin            | usbdux_firmware.bin     | usbduxfast_firmware.bin | usbduxsigma_firmware.bin |
| v4l-cx231xx-avcore-01.fw| v4l-cx23418-apu.fw      | v4l-cx23418-cpu.fw      | v4l-cx23418-dig.fw       |
| v4l-cx23885-avcore-01.fw| v4l-cx25840.fw          | vntwusb.fw              |
===== iwlist scanning (filtered) =================================================================================
No WLANs found
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:NO networkmanager:YES nm-applet:NO
===== ===== egrep -i "^[^#].*(persistent|networkmanager)" /etc/sysconfig/network/config ==========================
FORCE_PERSISTENT_NAMES=""
===== rfkill list wifi ===========================================================================================
0: phy0: Wireless LAN
	Soft blocked: yes
	Hard blocked: yes
===== Actual date for bias of following greps ====================================================================
15:50:16 2013-12-01
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
/var/log/messages:2013-11-30T11:04:44.538606+01:00 linux-xxj6 kernel: [   11.919782] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T15:49:56.032877+01:00 linux-xxj6 kernel: [   11.861336] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T19:58:38.385819+01:00 linux-xxj6 kernel: [   11.308136] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-12-01T09:06:57.405996+01:00 linux-xxj6 kernel: [   11.605237] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-12-01T15:20:46.429916+01:00 linux-xxj6 kernel: [   11.311634] Registered led device: rtl8187-phy0::radio
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
[   11.311634] Registered led device: rtl8187-phy0::radio
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==========
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|blacklist' ===============
==================================================================================================================
*** NWElizaStates V0.6.13a
IF:eth0 IM:2 IF:wlan0 IM:1 DI:2 AP:0 FALON:1 NIC:1 cNiC:2:1 NI:2 cNI:2 NIW:wlan0-1 CM:0 IP6:1 KM:0 WLW:0 RTDT:SuSE GUI:0 UID:0
[/code]
 
Und hier noch einmal das Skript mit integriertem WLan-Modul UND dem ZD1211 WLan-USB-Sticks

Vorher habe ich die Firmware noch einmal neu aktualisiert (die Version war jedoch offensichtlich älter als die vorher installierte)

Code:
collectNWData.sh V0.6.13a (Rev: 1.370, Build: 2013/09/06 20:58:18 UTC)

--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (1) Kabellose Verbindung (WLAN)

--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient

--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1

--- NWEliza untersucht das System nach häufigen Netzwerkkonfigurationsfehlern ...

!!! CND0120E: Die Netzwerkkarte wlan1 hat keine IP Adresse
!!! CND0120E: Die Netzwerkkarte wlan0 hat keine IP Adresse
!!! CND0290E: Keine Netzwerkkonfiguration für Interface wlan1 gefunden
!!! CND0490E: Kein Accesspoint mit der benutzen SSID auf dem Interface wlan1 gefunden
!!! CND0490E: Kein Accesspoint mit der benutzen SSID auf dem Interface wlan0 gefunden
!!! CND0380E: Es wurden keine WLANs am Interface wlan1 gefunden. Die Hardware und/oder Treiber ist nicht richtig konfiguriert
!!! CND0380E: Es wurden keine WLANs am Interface wlan0 gefunden. Die Hardware und/oder Treiber ist nicht richtig konfiguriert
!!! CND0320E: WLAN ist mit dem Hardware oder Software Switch ausgeschaltet
!!! CND0460I: Analyse von WLAN_firmware_problems nur möglich wenn das Script als root aufegrufen wird
!!! CND0230I: IPV6 ist eingeschaltet
!!! CND0310W: Klassische Netzwerkkonfiguration mit ifup wurde entdeckt. Die Konfiguration mit networkmanager ist einfacher
!!! CND0450W: WLAN Schlüsselmaskierung ist nicht vollständig auf dieser Distribution getestet. Bitte das Ausgabefile collectNWData.txt nach sichtbaren WLAN Schlüsseln absuchen und manuell maskieren
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailliertere Hinweise 
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden können.

--- Wenn eigene Lösungsversuche erfolglos waren dann den Inhalt der Datei collectNWData.txt im Netz ablegen
--- (Links siehe http://www.linux-tips-and-tricks.de/CND_UPL) 
--- und dann der nopaste Link im bevorzugten Linux Forum posten.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/lsb-release
/etc/os-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
NAME=openSUSE
VERSION="12.3 (Dartmouth)"
VERSION_ID="12.3"
PRETTY_NAME="openSUSE 12.3 (Dartmouth) (x86_64)"
ID=opensuse
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:opensuse:12.3"
openSUSE 12.3 (x86_64)
VERSION = 12.3
CODENAME = Dartmouth
===== uname -a ===================================================================================================
Linux linux-xxj6.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
NAME='RTL8101E/RTL8102E PCI Express Fast Ethernet controller'
STARTMODE='auto'
USERCONTROL='no'
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
NAME='Realtek WLAN controller'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK=@@@@@@
--- /etc/sysconfig/network/ifcfg-wlanusb
BOOTPROTO='dhcp'
NAME='USB2.0 WLAN'
STARTMODE='hotplug'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='no'
WIRELESS_WPA_PSK=@@@@@@
===== ping tests =================================================================================================
Ping of 173.194.35.180 failed
ping: unknown host www.google.com
Ping of www.google.com failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
===== cat /etc/hosts =============================================================================================
127.0.0.1	localhost
===== (route -n && route -A inet6 -n) | egrep "(eth|ath|ra|wlan|dsl|ppp)" ========================================
===== ifconfig (filtered for eth|wlan|ra|ath|dsl|ppp) ============================================================
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
===== lspci ======================================================================================================
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:ff00]
	Kernel driver in use: r8169
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 002: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter
Bus 001 Device 003: ID 064e:d104 Suyin Corp. 
Bus 002 Device 008: ID 1582:6003 Fiberline WL-430U 802.11bg
Bus 002 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 004: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
===== hwinfo (filtered) ==========================================================================================
28: PCI e00.0: 0200 Ethernet controller
  Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  SubVendor: pci 0x1179 "Toshiba America Info Systems"
  SubDevice: pci 0xff00 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: no
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
38: USB 00.0: 0282 WLAN controller
  Model: "Realtek WLAN controller"
  Vendor: usb 0x0bda "Realtek Semiconductor Corp."
  Device: usb 0x8197 
  Driver: "rtl8187"
  Driver Modules: "rtl8187"
  Device File: wlan0
  Link detected: no
    Driver Status: rtl8187 is active
    Driver Activation Cmd: "modprobe rtl8187"
43: USB 00.0: 0282 WLAN controller
  Model: "ZyDAS USB2.0 WLAN"
  Vendor: usb 0x1582 "ZyDAS"
  Device: usb 0x6003 "USB2.0 WLAN"
  Driver: "zd1211rw"
  Driver Modules: "zd1211rw"
  Device File: wlan1
  Link detected: no
    Driver Status: zd1211rw is active
    Driver Activation Cmd: "modprobe zd1211rw"
===== lsmod (filtered) ===========================================================================================
| ac              | af_packet       | arc4            | cdc_ether       | cfg80211         |
| coretemp        | drm             | drm_kms_helper  | eeprom_93cx6    | i2c_algo_bit     |
| i2c_i801        | i915            | ip_tables       | lpc_ich         | mac80211         |
| mfd_core        | microcode       | mperf           | r8169           | rfkill           |
| rndis_host      | rtl8187         | scsi_dh         | scsi_dh_alua    | scsi_dh_emc      |
| scsi_dh_hp_sw   | scsi_dh_rdac    | sg              | sparse_keymap   | sr_mod           |
| usbnet          | usb_storage     | wmi             | zd1211rw        |
===== iwconfig ===================================================================================================
eth0      no wireless extensions.
wlan1     IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
wlan0     IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
===== ls /lib/firmware/*.{fw,ucode,bin} ==========================================================================
| agere_ap_fw.bin         | agere_sta_fw.bin        | ar5523.bin              | ar7010.fw                |
| ar7010_1_1.fw           | ar9170-1.fw             | ar9170-2.fw             | ar9271.fw                |
| ath3k-1.fw              | bnx2x-e1-4.8.53.0.fw    | bnx2x-e1-5.2.13.0.fw    | bnx2x-e1-5.2.7.0.fw      |
| bnx2x-e1h-4.8.53.0.fw   | bnx2x-e1h-5.2.13.0.fw   | bnx2x-e1h-5.2.7.0.fw    | carl9170-1.fw            |
| dvb-fe-xc5000-1.6.114.fw| dvb-usb-dib0700-1.20.fw | dvb-usb-terratec-h5-drxk.fw| f2255usb.bin             |
| htc_7010.fw             | htc_9271.fw             | intelliport2.bin        | iwlwifi-100-5.ucode      |
| iwlwifi-1000-3.ucode    | iwlwifi-1000-5.ucode    | iwlwifi-105-6.ucode     | iwlwifi-135-6.ucode      |
| iwlwifi-2000-6.ucode    | iwlwifi-2030-6.ucode    | iwlwifi-3160-7.ucode    | iwlwifi-3945-2.ucode     |
| iwlwifi-4965-1.ucode    | iwlwifi-4965-2.ucode    | iwlwifi-5000-1.ucode    | iwlwifi-5000-2.ucode     |
| iwlwifi-5000-5.ucode    | iwlwifi-5150-2.ucode    | iwlwifi-6000-4.ucode    | iwlwifi-6000g2a-5.ucode  |
| iwlwifi-6000g2a-6.ucode | iwlwifi-6000g2b-5.ucode | iwlwifi-6000g2b-6.ucode | iwlwifi-6050-4.ucode     |
| iwlwifi-6050-5.ucode    | iwlwifi-7260-7.ucode    | lbtf_usb.bin            | lgs8g75.fw               |
| mt7650.bin              | mts_mt9234mu.fw         | mts_mt9234zba.fw        | phanfw.bin               |
| ql2100_fw.bin           | ql2200_fw.bin           | ql2300_fw.bin           | ql2322_fw.bin            |
| ql2400_fw.bin           | ql2500_fw.bin           | rp2.fw                  | rt2561.bin               |
| rt2561s.bin             | rt2661.bin              | rt2860.bin              | rt2870.bin               |
| rt3070.bin              | rt3071.bin              | rt3090.bin              | rt3290.bin               |
| rt73.bin                | s2250.fw                | s2250_loader.fw         | tlg2300_firmware.bin     |
| tr_smctr.bin            | usbdux_firmware.bin     | usbduxfast_firmware.bin | usbduxsigma_firmware.bin |
| v4l-cx231xx-avcore-01.fw| v4l-cx23418-apu.fw      | v4l-cx23418-cpu.fw      | v4l-cx23418-dig.fw       |
| v4l-cx23885-avcore-01.fw| v4l-cx25840.fw          | vntwusb.fw              |
===== iwlist scanning (filtered) =================================================================================
No WLANs found
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:NO networkmanager:YES nm-applet:NO
===== ===== egrep -i "^[^#].*(persistent|networkmanager)" /etc/sysconfig/network/config ==========================
FORCE_PERSISTENT_NAMES=""
===== rfkill list wifi ===========================================================================================
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes
1: phy1: Wireless LAN
	Soft blocked: no
	Hard blocked: no
===== Actual date for bias of following greps ====================================================================
15:47:36 2013-12-01
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
/var/log/messages:2013-11-30T11:04:44.538606+01:00 linux-xxj6 kernel: [   11.919782] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T15:49:56.032877+01:00 linux-xxj6 kernel: [   11.861336] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-11-30T19:58:38.385819+01:00 linux-xxj6 kernel: [   11.308136] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-12-01T09:06:57.405996+01:00 linux-xxj6 kernel: [   11.605237] Registered led device: rtl8187-phy0::radio
/var/log/messages:2013-12-01T15:20:46.429916+01:00 linux-xxj6 kernel: [   11.311634] Registered led device: rtl8187-phy0::radio
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
[   11.311634] Registered led device: rtl8187-phy0::radio
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==========
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|blacklist' ===============
==================================================================================================================
*** NWElizaStates V0.6.13a
IF:eth0 IM:2 IF:wlan1 IM:1 IF:wlan0 IM:1 DI:3 AP:0 FALON:1 NIC:1 cNiC:2:1 NIC:1 cNiC:3:1 NI:2 cNI:2 NIW:wlan0-1 CM:0 IP6:1 KM:0 WLW:0 RTDT:SuSE GUI:0 UID:0
 

Jägerschlürfer

Moderator
Teammitglied
thio schrieb:
Code:
!!! CND0320E: WLAN ist mit dem Hardware oder Software Switch ausgeschaltet
Bitte mal prüfen, ob der interne WLan Adapter ausgeschalten ist
Code:
!!! CND0460I: Analyse von WLAN_firmware_problems nur möglich wenn das Script als root aufegrufen wird
Bitte das Skript als root ausführen

Und lass doch den USB WLAN Stick auch mal weg,..
 
Code: Alles auswählen
!!! CND0320E: WLAN ist mit dem Hardware oder Software Switch ausgeschaltet

Das W-Lan Modul lässt sich jedoch nicht an-/ aus/ um-schalten. Die Funktionstaste ändert offensichtlich nichts..

Code: Alles auswählen
!!! CND0460I: Analyse von WLAN_firmware_problems nur möglich wenn das Script als root aufgerufen wird

Bitte das Skript als root ausführen

Und das "collectNWData.sh" habe ich als root ausgeführt.
Kann ich den den teil "WLAN_firmware_problems" noch mal gesondert ausführen?

Und lass doch den USB WLAN Stick auch mal weg,..

Ich habe das Skript einmal mit und einmal ohne den WLan-USB-Stick ausgeführt
 
rfkill liefert folgendes:

Code:
sudo rfkill list all
0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: yes
1: phy1: Wireless LAN
        Soft blocked: no
        Hard blocked: no

0:phy0: Ist das integrierte WLan-Modul,
1:phy1: Ist der WLan-USB-Stick
 
Oben