Webcam in Sony Vaio mit SuSE 12.1 [Gelöst]

Zuzia · 22 Dez. 2011

Hallo,
ich habe auf meinem Laptop Sony Vaio FE die SuSe 12.1 installiert (Desktop_64bit)
Nun versuche ich ohne Erfolg von der integrierten Webcam ein Bild zu kriegen...

Ich habe den Treiber "r5u870" installiert, und der läuft auch - trotzdem VLC, Skype und Cheese melden "kein Gerät"

Hier meine Ausgaben von lsusb:

Code:

Bus 001 Device 004: ID 05ca:1836 Ricoh Co., Ltd Visual Communication Camera VGP-VCC4 [R5U870]

und lsmod:

Code:

uvcvideo               76804  0 
videodev              102250  1 uvcvideo
 .....
v4l2_compat_ioctl32    17083  1 videodev

Der YaST in Hardware-Info sagt, dass der Treiber aktiv ist, Modprobe:Ja und unter Modules steht "modprobe uvcvideo" :???:

Für die Hilfe danke im Voraus Gruß Z.

Zuzia · 24 Dez. 2011

Hmmm...
Frohe Weihnachten!
Gruß Z.

tomm.fa · 24 Dez. 2011

Zuzia schrieb:
Hmmm...
Frohe Weihnachten!
Gruß Z.

Dafür gibt es dieses Thema: http://www.linux-club.de/viewtopic.php?f=68&t=115057

Zum Thema:
Wo steht denn das r5u870 geladen ist? Was ergibt denn die Ausgabe von:

Code:

/usr/sbin/hwinfo --usb

, die komplette Ausgabe von lsmod? Dann bitte auch noch welcher Kernel verwendet wird, welche Pakete wie und woher für r5u870 installiert wurden.

Zuzia · 26 Dez. 2011

Hallo,

von dem geladenem Treiber meldet YaSt in Hadrware-Info.

Auf meinem Sony läuft Linux 3.1.0-1.2-desktop x86_64 mit KDE 4.7.4 (4.7.4) "release 11"

/usr/sbin/hwinfo --usb

Code:

...
08: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: zFuK.B_1Hb9Qsm00
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0
  SysFS BusID: 1-8:1.0
  Hardware Class: unknown
  Model: "Ricoh Unclassified device"
  Hotplug: USB
  Vendor: usb 0x05ca "Ricoh Co., Ltd"
  Device: usb 0x1836 
  Revision: "1.00"
  Speed: 480 Mbps
  Module Alias: "usb:v05CAp1836d0100dcEFdsc02dp01ic0Eisc01ip00"
  Driver Info #0:
    Driver Status: uvcvideo is active
    Driver Activation Cmd: "modprobe uvcvideo"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #3 (Hub)

...

komplete lsmod - bitte:

Code:

Module                  Size  Used by
fuse                   87950  3 
ip6t_LOG               17095  5 
xt_tcpudp              12924  2 
xt_pkttype             12504  3 
ipt_LOG                13040  5 
xt_limit               12711  10 
rfcomm                 77995  8 
bnep                   19817  2 
af_packet              35338  4 
ip6t_REJECT            12974  3 
nf_conntrack_ipv6      14349  3 
nf_defrag_ipv6         18438  1 nf_conntrack_ipv6
ip6table_raw           12683  1 
xt_NOTRACK             12504  4 
ipt_REJECT             12576  3 
iptable_raw            12678  1 
iptable_filter         12810  1 
ip6table_mangle        12740  0 
nf_conntrack_netbios_ns    12665  0 
nf_conntrack_broadcast    12589  1 nf_conntrack_netbios_ns
nf_conntrack_ipv4      14783  3 
nf_defrag_ipv4         12729  1 nf_conntrack_ipv4
ip_tables              27717  2 iptable_raw,iptable_filter
xt_conntrack           12760  6 
nf_conntrack           96202  6 nf_conntrack_ipv6,xt_NOTRACK,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ipv4,xt_conntrack
ip6table_filter        12815  1 
ip6_tables             27864  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables               34102  16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,xt_conntrack,ip6table_filter,ip6_tables
microcode              35758  0 
cpufreq_conservative    13821  0 
cpufreq_userspace      13162  0 
cpufreq_powersave      12618  0 
acpi_cpufreq           18766  1 
mperf                  12667  1 acpi_cpufreq
dm_mod                 92333  0 
nvidia              12136858  43 
arc4                   12529  2 
snd_hda_codec_idt      74966  1 
iwl3945                87232  0 
snd_hda_intel          33441  2 
snd_hda_codec         118874  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13613  1 snd_hda_codec
snd_pcm               109594  2 snd_hda_intel,snd_hda_codec
snd_timer              34086  1 snd_pcm
snd                    86602  10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
firewire_ohci          44818  0 
tifm_7xx1              13411  0 
uvcvideo               76804  0 
iTCO_wdt               17863  0 
iwl_legacy             87133  1 iwl3945
videodev              102250  1 uvcvideo
tifm_core              15654  1 tifm_7xx1
firewire_core          71750  1 firewire_ohci
sr_mod                 22464  0 
sg                     36561  0 
ecb                    12863  1 
cdrom                  47994  1 sr_mod
btusb                  23904  2 
video                  19653  0 
button                 13949  0 
battery                18608  0 
ac                     13055  0 
e100                   41309  0 
v4l2_compat_ioctl32    17083  1 videodev
mac80211              332546  2 iwl3945,iwl_legacy
pcmcia                 70281  0 
sony_laptop            49362  0 
iTCO_vendor_support    13718  1 iTCO_wdt
soundcore              15091  1 snd
cfg80211              210325  3 iwl3945,iwl_legacy,mac80211
joydev                 17606  0 
crc_itu_t              12707  1 firewire_core
bluetooth             270903  23 rfcomm,bnep,btusb
snd_page_alloc         18572  2 snd_hda_intel,snd_pcm
rfkill                 25967  4 sony_laptop,cfg80211,bluetooth
yenta_socket           41554  0 
pcmcia_rsrc            18591  1 yenta_socket
pcmcia_core            27724  3 pcmcia,yenta_socket,pcmcia_rsrc
i2c_i801               18013  0 
pcspkr                 12702  0 
autofs4                43290  2 
thermal                22961  0 
processor              45192  3 acpi_cpufreq
thermal_sys            25017  3 video,thermal,processor
ata_generic            12937  0 
jadwiga@linux-p6tj:~>

Geladen sind: vlc vom Packman, Skype für Linux vom Skype-Download (32 bit, läuft aber mit 32bit libusb, und Glib), Chesse habe ich mit YaSt installiert -woher, k.A.

Gruß, Z

Rainer Juhser · 26 Dez. 2011

Zuzia schrieb:
Chesse habe ich mit YaSt installiert -woher, k.A.

Kann man herausfinden mit

Code:

zypper se cheese

oder noch exakter mit

Code:

zypper se -i cheese

tomm.fa · 26 Dez. 2011

tomm.fa schrieb:
welche Pakete wie und woher für r5u870 installiert wurden.

Welche Ausgabe ergibt denn:

Code:

modprobe -v r5u870

?

Zuzia · 26 Dez. 2011

Hallo,
also Cheese 3.2.1-2.1.2-x86_64 ist vom Anbieter openSUSE,

die beden Zypper_Befehle ergaben folgendes:

Code:

jadwiga@linux-p6tj:~> zypper se cheese
Repository 'Aktualisierungen für openSUSE 12.1 12.1-1.4' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'KDE 47' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - KDE:Extra' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - KDE:UpdatedApps' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - Mozilla' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'Packman Repository' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Daten des Repositorys laden ...
Installierte Pakete lesen ...

S | Name                      | Zusammenfassung                                        | Typ       
--+---------------------------+--------------------------------------------------------+-----------
i | cheese                    | Webcam Booth for GNOME                                 | Paket     
  | cheese-devel              | Webcam Booth for GNOME - Development Files             | Paket     
  | cheese-lang               | Languages for package cheese                           | Paket     
  | cheesetracker             | A portable Impulse Tracker clone                       | Paket     
  | cheesetracker             | A portable Impulse Tracker clone                       | Quellpaket
  | cheesetracker-debuginfo   | Debug information for package cheesetracker            | Paket     
  | cheesetracker-debugsource | Debug sources for package cheesetracker                | Paket     
i | libcheese-common          | Webcam Booth for GNOME - Common Data used by Libraries | Paket     
i | libcheese-gtk20           | Webcam Booth for GNOME - UI Library                    | Paket     
i | libcheese1                | Webcam Booth for GNOME - Library                       | Paket     
jadwiga@linux-p6tj:~> zypper se -i cheese
Repository 'Aktualisierungen für openSUSE 12.1 12.1-1.4' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'KDE 47' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - KDE:Extra' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - KDE:UpdatedApps' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'openSUSE BuildService - Mozilla' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Repository 'Packman Repository' ist veraltet. Sie können 'zypper refresh' als Root ausführen, um es zu aktualisieren.
Daten des Repositorys laden ...
Installierte Pakete lesen ...

S | Name             | Zusammenfassung                                        | Typ  
--+------------------+--------------------------------------------------------+------
i | cheese           | Webcam Booth for GNOME                                 | Paket
i | libcheese-common | Webcam Booth for GNOME - Common Data used by Libraries | Paket
i | libcheese-gtk20  | Webcam Booth for GNOME - UI Library                    | Paket
i | libcheese1       | Webcam Booth for GNOME - Library                       | Paket
jadwiga@linux-p6tj:~>

modprobe -v r5u870 ergab:

Code:

linux-p6tj:/home/jadwiga # modprobe -v r5u870
FATAL: Module r5u870 not found.
linux-p6tj:/home/jadwiga #

r5u870 habe ich als .rpm von hier:

Code:

h**p://rpm.pbone.net/index.php3/stat/4/idpl/11802481/dir//com/r5u870-firmware-0.11.2.r107-2.4.i586.rpm.html

Nach Downloaden mit YaST installiert - es lief ohne Probleme durch ist jetzt in Software als V. 0.11.2.r107-2.4-i586 vom Anbieter openSUSE Build Service.
Vermute die Inkompatybilytät mit meinem 64bit System - stimmt?

Gruß, Z.

josef-wien · 26 Dez. 2011

Zuzia schrieb:
Vermute die Inkompatybilytät mit meinem 64bit System - stimmt?

firmware-Dateien sind üblicherweise architekturunabhängig. Installiere einmal die aktuelle Version.

tomm.fa · 26 Dez. 2011

Zuzia schrieb:
r5u870 habe ich als .rpm von hier:

Code:

h**p://rpm.pbone.net/index.php3/stat/4/idpl/11802481/dir//com/r5u870-firmware-0.11.2.r107-2.4.i586.rpm.html

Das war das für openSUSE 11.0 und dann auch nur die Firmware, aber kein KMP.

RPM found in directory: /mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/enzokiel/openSUSE_11.0_Update/i586

Zuzia schrieb:
Nach Downloaden mit YaST installiert - es lief ohne Probleme durch ist jetzt in Software als V. 0.11.2.r107-2.4-i586 vom Anbieter openSUSE Build Service.

Von wem dort genau? Ich finde dort 6 Anbieter und nicht jeder bietet Pakete für openSUSE 12.1 an.

Zuzia schrieb:
Vermute die Inkompatybilytät mit meinem 64bit System - stimmt?

Könnte wohl sein.

Deinstalliere mal wieder alles was du zuvor in das System "geprügelt" hast und dann führe mal (als Root/su) ein:

Code:

zypper -p http://download.opensuse.org/repositories/home:/enzokiel/openSUSE_12.1_Update in r5u870-firmware r5u870-kmp-desktop

aus, dann sollten die passenden Pakete installiert sowie Module und Firmware vorhanden sein.

Zuzia · 27 Dez. 2011

HI,
habe den alten Treiber mit YaST deinstalliert, danach den aktuellen aufgespielt (danke josef-wien) - keine Änderung.
Danach nochmal alles runter, zypper_ Befehl von tomm.fa ausgeführt, r5u870 installiert.
Jetzt habe ich nach dem Befehl modprobe -v r5u870 folgendes:

Code:

jadwiga@linux-p6tj:~> su
Passwort: 
linux-p6tj:/home/jadwiga # modprobe -v r5u870
linux-p6tj:/home/jadwiga #

/usr/sbin/hwinfo --usb sagt:

Code:

08: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: zFuK.B_1Hb9Qsm00
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0
  SysFS BusID: 1-8:1.0
  Hardware Class: unknown
  Model: "Ricoh Unclassified device"
  Hotplug: USB
  Vendor: usb 0x05ca "Ricoh Co., Ltd"
  Device: usb 0x1836 
  Revision: "1.00"
  Driver: "r5u870"
  Driver Modules: "r5u870"
  Speed: 480 Mbps
  Module Alias: "usb:v05CAp1836d0100dcEFdsc02dp01ic0Eisc01ip00"
  Driver Info #0:
    Driver Status: r5u870 is active
    Driver Activation Cmd: "modprobe r5u870"
  Driver Info #1:
    Driver Status: uvcvideo is active
    Driver Activation Cmd: "modprobe uvcvideo"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #3 (Hub)

also das Gleiche wie vorher,

lsmod aber hat etwas mehr drinnen:

Code:

nvidia              12136858  43 
r5u870                 32177  0 
usbcam                 52141  1 r5u870
videobuf_dma_sg        19354  1 usbcam
videobuf_core          30486  2 usbcam,videobuf_dma_sg
uvcvideo               76804  0 
videodev              102250  2 usbcam,uvcvideo

Trotzdem habe ich weiter kein Bild von der Webcam - cheese meldet: "Kein Gerät gefunden":

Code:

jadwiga@linux-p6tj:~> cheese
(cheese:3002): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel

** (cheese:3002): WARNING **: cheese-window.vala:1259: Error: Kein Gerät gefunden

Das Gleiche macht Skype.

Ganz dumme Frage: muss man die Webcam vielleicht irgendwie einschalten/konfigurieren?

ps:
Gruß, Z.

tomm.fa · 27 Dez. 2011

Es sind zwei verschiedene Module für die Kamera geladen. uvcvideo mal deaktivieren und evtl. auf die Schwarze Liste (Blacklist) setzen.

Code:

modprobe -v -r uvcvideo

Zuzia · 27 Dez. 2011

Code:

linux-p6tj:/home/jadwiga # modprobe -v -r uvcvideo
rmmod /lib/modules/3.1.0-1.2-desktop/kernel/drivers/media/video/uvc/uvcvideo.ko
linux-p6tj:/home/jadwiga #

Weiter keine Änderung. Z.

Zuzia · 30 Dez. 2011

Hallo,
vielleicht zum Jahreswechsel noch eine Idee?
Gruß, Zuzia

tomm.fa · 6 Jan. 2012

Wie schaut es denn zur Zeit aus? lsmod, hwinfo? Zeige auch mal die Ausgabe von dmesg, am besten über http://nopaste.info/.

Zuzia · 6 Jan. 2012

Erstmal weiter duster...Aber ich verliere die Hoffnung nicht

Bitte gewünschte Ausgaben - hier, mit dem "nopaste" komme ich irgendwie nicht klar:

Code:

linux-p6tj:/home/jadwiga # lsmod
Module                  Size  Used by
fuse                   87950  3 
ip6t_LOG               17095  5 
xt_tcpudp              12924  2 
xt_pkttype             12504  3 
ipt_LOG                13040  5 
xt_limit               12711  10 
rfcomm                 77995  8 
af_packet              35338  4 
bnep                   19817  2 
ip6t_REJECT            12974  3 
nf_conntrack_ipv6      14349  3 
nf_defrag_ipv6         18438  1 nf_conntrack_ipv6
ip6table_raw           12683  1 
xt_NOTRACK             12504  4 
ipt_REJECT             12576  3 
iptable_raw            12678  1 
iptable_filter         12810  1 
ip6table_mangle        12740  0 
nf_conntrack_netbios_ns    12665  0 
nf_conntrack_broadcast    12589  1 nf_conntrack_netbios_ns
nf_conntrack_ipv4      14783  3 
nf_defrag_ipv4         12729  1 nf_conntrack_ipv4
ip_tables              27717  2 iptable_raw,iptable_filter
xt_conntrack           12760  6 
nf_conntrack           96202  6 nf_conntrack_ipv6,xt_NOTRACK,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ipv4,xt_conntrack
ip6table_filter        12815  1 
ip6_tables             27864  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables               34102  16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,xt_conntrack,ip6table_filter,ip6_tables
cpufreq_conservative    13821  0 
cpufreq_userspace      13162  0 
cpufreq_powersave      12618  0 
acpi_cpufreq           18766  1 
mperf                  12667  1 acpi_cpufreq
microcode              35758  0 
dm_mod                 92333  0 
nvidia              12136858  43 
pcmcia                 70281  0 
arc4                   12529  2 
r5u870                 32177  0 
usbcam                 52141  1 r5u870
videobuf_dma_sg        19354  1 usbcam
videobuf_core          30486  2 usbcam,videobuf_dma_sg
videodev              102250  1 usbcam
v4l2_compat_ioctl32    17083  1 videodev
snd_hda_codec_idt      74966  1 
ecb                    12863  1 
sg                     36561  0 
sr_mod                 22464  0 
cdrom                  47994  1 sr_mod
joydev                 17606  0 
tifm_7xx1              13411  0 
tifm_core              15654  1 tifm_7xx1
btusb                  23904  2 
bluetooth             270903  23 rfcomm,bnep,btusb
firewire_ohci          44818  0 
yenta_socket           41554  0 
pcmcia_rsrc            18591  1 yenta_socket
pcmcia_core            27724  3 pcmcia,yenta_socket,pcmcia_rsrc
firewire_core          71750  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
snd_hda_intel          33441  2 
snd_hda_codec         118874  2 snd_hda_codec_idt,snd_hda_intel
e100                   41309  0 
snd_hwdep              13613  1 snd_hda_codec
battery                18608  0 
i2c_i801               18013  0 
pcspkr                 12702  0 
iwl3945                87232  0 
sony_laptop            49362  0 
iTCO_wdt               17863  0 
iTCO_vendor_support    13718  1 iTCO_wdt
iwl_legacy             87133  1 iwl3945
mac80211              332546  2 iwl3945,iwl_legacy
ac                     13055  0 
video                  19653  0 
snd_pcm               109594  2 snd_hda_intel,snd_hda_codec
cfg80211              210325  3 iwl3945,iwl_legacy,mac80211
snd_timer              34086  1 snd_pcm
button                 13949  0 
snd                    86602  10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore              15091  1 snd
snd_page_alloc         18572  2 snd_hda_intel,snd_pcm
rfkill                 25967  4 bluetooth,sony_laptop,cfg80211
autofs4                43290  2 
thermal                22961  0 
processor              45192  3 acpi_cpufreq
thermal_sys            25017  3 video,thermal,processor
ata_generic            12937  0 
linux-p6tj:/home/jadwiga #

Code:

  Hardware Class: unknown
  Model: "DMA controller"
  I/O Ports: 0x00-0x1f (rw)
  I/O Ports: 0xc0-0xdf (rw)
  I/O Ports: 0x80-0x8f (rw)
  DMA: 4
  Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 0800 PIC (8259)
  [Created at misc.218]
  Unique ID: rdCR.8uRK7LxiIA2
  Hardware Class: unknown
  Model: "PIC"
  I/O Ports: 0x20-0x21 (rw)
  I/O Ports: 0xa0-0xa1 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0802 Timer (8254)
  [Created at misc.229]
  Unique ID: rdCR.AJKleuxpiP0
  Hardware Class: unknown
  Model: "Timer"
  IRQ: 0 (379524 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0900 Keyboard controller
  [Created at misc.250]
  Unique ID: rdCR.9N+EecqykME
  Hardware Class: unknown
  Model: "Keyboard controller"
  I/O Port: 0x60 (rw)
  I/O Port: 0x64 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

08: None 00.0: 10400 PS/2 Controller
  [Created at misc.303]
  Unique ID: rdCR.DziBbWO85o5
  Hardware Class: unknown
  Model: "PS/2 Controller"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

11: None 00.0: 10102 Main Memory
  [Created at memory.66]
  Unique ID: rdCR.CxwsZFjVASF
  Hardware Class: memory
  Model: "Main Memory"
  Memory Range: 0x00000000-0x7d50afff (rw)
  Memory Size: 2 GB
  Config Status: cfg=no, avail=yes, need=no, active=unknown

12: PCI 00.0: 0600 Host bridge
  [Created at pci.319]
  Unique ID: qLht.dG3a1QwXzy1
  SysFS ID: /devices/pci0000:00/0000:00:00.0
  SysFS BusID: 0000:00:00.0
  Hardware Class: bridge
  Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27a0 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x03
  Module Alias: "pci:v00008086d000027A0sv0000104Dsd000081EFbc06sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

13: PCI 01.0: 0604 PCI bridge (Normal decode)
  [Created at pci.319]
  Unique ID: vSkL.CXm9Z53TJqE
  SysFS ID: /devices/pci0000:00/0000:00:01.0
  SysFS BusID: 0000:00:01.0
  Hardware Class: bridge
  Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27a1 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x03
  Driver: "pcieport"
  IRQ: 40 (no events)
  Module Alias: "pci:v00008086d000027A1sv0000104Dsd000081EFbc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

14: PCI 1b.0: 0403 Audio device
  [Created at pci.319]
  Unique ID: u1Nb.VJmkeaW8bVD
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "snd_hda_intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xd2300000-0xd2303fff (rw,non-prefetchable)
  IRQ: 45 (173 events)
  Module Alias: "pci:v00008086d000027D8sv0000104Dsd000081EFbc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

15: PCI 1c.0: 0604 PCI bridge (Normal decode)
  [Created at pci.319]
  Unique ID: z8Q3.wAmHbvWqyMB
  SysFS ID: /devices/pci0000:00/0000:00:1c.0
  SysFS BusID: 0000:00:1c.0
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d0 "82801G (ICH7 Family) PCI Express Port 1"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "pcieport"
  IRQ: 41 (no events)
  Module Alias: "pci:v00008086d000027D0sv0000104Dsd000081EFbc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

16: PCI 1c.1: 0604 PCI bridge (Normal decode)
  [Created at pci.319]
  Unique ID: qTvu.y+enY2mE08C
  SysFS ID: /devices/pci0000:00/0000:00:1c.1
  SysFS BusID: 0000:00:1c.1
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d2 "82801G (ICH7 Family) PCI Express Port 2"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "pcieport"
  IRQ: 42 (no events)
  Module Alias: "pci:v00008086d000027D2sv0000104Dsd000081EFbc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 1c.2: 0604 PCI bridge (Normal decode)
  [Created at pci.319]
  Unique ID: hoOk._qXHWB+e3vC
  SysFS ID: /devices/pci0000:00/0000:00:1c.2
  SysFS BusID: 0000:00:1c.2
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d4 "82801G (ICH7 Family) PCI Express Port 3"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "pcieport"
  IRQ: 43 (no events)
  Module Alias: "pci:v00008086d000027D4sv0000104Dsd000081EFbc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 1c.3: 0604 PCI bridge (Normal decode)
  [Created at pci.319]
  Unique ID: Z7uZ.0gQnTKE37gD
  SysFS ID: /devices/pci0000:00/0000:00:1c.3
  SysFS BusID: 0000:00:1c.3
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 4"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d6 "82801G (ICH7 Family) PCI Express Port 4"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "pcieport"
  IRQ: 44 (no events)
  Module Alias: "pci:v00008086d000027D6sv0000104Dsd000081EFbc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

19: PCI 1d.0: 0c03 USB Controller (UHCI)
  [Created at pci.319]
  Unique ID: 1GTX.NZ544jRdhLA
  SysFS ID: /devices/pci0000:00/0000:00:1d.0
  SysFS BusID: 0000:00:1d.0
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c8 "82801G (ICH7 Family) USB UHCI Controller #1"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1800-0x181f (rw)
  IRQ: 23 (285 events)
  Module Alias: "pci:v00008086d000027C8sv0000104Dsd000081EFbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

20: PCI 1d.1: 0c03 USB Controller (UHCI)
  [Created at pci.319]
  Unique ID: vayM.uz1qYHZKDkA
  SysFS ID: /devices/pci0000:00/0000:00:1d.1
  SysFS BusID: 0000:00:1d.1
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c9 "82801G (ICH7 Family) USB UHCI Controller #2"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1820-0x183f (rw)
  IRQ: 17 (41 events)
  Module Alias: "pci:v00008086d000027C9sv0000104Dsd000081EFbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

21: PCI 1d.2: 0c03 USB Controller (UHCI)
  [Created at pci.319]
  Unique ID: mvRC.PO_Z1sg1l6B
  SysFS ID: /devices/pci0000:00/0000:00:1d.2
  SysFS BusID: 0000:00:1d.2
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27ca "82801G (ICH7 Family) USB UHCI Controller #3"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1840-0x185f (rw)
  IRQ: 18 (258 events)
  Module Alias: "pci:v00008086d000027CAsv0000104Dsd000081EFbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

22: PCI 1d.3: 0c03 USB Controller (UHCI)
  [Created at pci.319]
  Unique ID: eEx1.wowJWQokGVB
  SysFS ID: /devices/pci0000:00/0000:00:1d.3
  SysFS BusID: 0000:00:1d.3
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #4"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27cb "82801G (ICH7 Family) USB UHCI Controller #4"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1860-0x187f (rw)
  IRQ: 16 (38759 events)
  Module Alias: "pci:v00008086d000027CBsv0000104Dsd000081EFbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

23: PCI 1d.7: 0c03 USB Controller (EHCI)
  [Created at pci.319]
  Unique ID: 5YuN.xDTFH3PCKj0
  SysFS ID: /devices/pci0000:00/0000:00:1d.7
  SysFS BusID: 0000:00:1d.7
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB2 EHCI Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27cc "82801G (ICH7 Family) USB2 EHCI Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xd2304000-0xd23043ff (rw,non-prefetchable)
  IRQ: 23 (285 events)
  Module Alias: "pci:v00008086d000027CCsv0000104Dsd000081EFbc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is not active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

24: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
  [Created at pci.319]
  Unique ID: 6NW+.OgV+9q5j5J4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0
  SysFS BusID: 0000:00:1e.0
  Hardware Class: bridge
  Model: "Intel 82801 Mobile PCI Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2448 "82801 Mobile PCI Bridge"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0xe2
  Module Alias: "pci:v00008086d00002448sv0000104Dsd000081EFbc06sc04i01"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

25: PCI 1f.0: 0601 ISA bridge
  [Created at pci.319]
  Unique ID: BUZT.W0kwFzHSkBD
  SysFS ID: /devices/pci0000:00/0000:00:1f.0
  SysFS BusID: 0000:00:1f.0
  Hardware Class: bridge
  Model: "Intel 82801GBM (ICH7-M) LPC Interface Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27b9 "82801GBM (ICH7-M) LPC Interface Bridge"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Module Alias: "pci:v00008086d000027B9sv0000104Dsd000081EFbc06sc01i00"
  Driver Info #0:
    Driver Status: intel_rng is not active
    Driver Activation Cmd: "modprobe intel_rng"
  Driver Info #1:
    Driver Status: iTCO_wdt is active
    Driver Activation Cmd: "modprobe iTCO_wdt"
  Driver Info #2:
    Driver Status: leds_ss4200 is not active
    Driver Activation Cmd: "modprobe leds_ss4200"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

26: PCI 1f.1: 0101 IDE interface
  [Created at pci.319]
  Unique ID: 3p2J.BFqDgBkF5u7
  SysFS ID: /devices/pci0000:00/0000:00:1f.1
  SysFS BusID: 0000:00:1f.1
  Hardware Class: storage
  Model: "Intel 82801G (ICH7 Family) IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27df "82801G (ICH7 Family) IDE Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0x1880-0x188f (rw)
  IRQ: 18 (258 events)
  Module Alias: "pci:v00008086d000027DFsv0000104Dsd000081EFbc01sc01i8a"
  Driver Info #0:
    Driver Status: ata_generic is active
    Driver Activation Cmd: "modprobe ata_generic"
  Driver Info #1:
    Driver Status: pata_acpi is not active
    Driver Activation Cmd: "modprobe pata_acpi"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

27: PCI 1f.2: 0101 IDE interface
  [Created at pci.319]
  Unique ID: w7Y8.L+8r_DG+aY2
  SysFS ID: /devices/pci0000:00/0000:00:1f.2
  SysFS BusID: 0000:00:1f.2
  Hardware Class: storage
  Model: "Intel 82801GBM/GHM (ICH7 Family) SATA IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c4 "82801GBM/GHM (ICH7 Family) SATA IDE Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x18c8-0x18cf (rw)
  I/O Ports: 0x18ac-0x18af (rw)
  I/O Ports: 0x18c0-0x18c7 (rw)
  I/O Ports: 0x18a8-0x18ab (rw)
  I/O Ports: 0x18b0-0x18bf (rw)
  Memory Range: 0xd2304400-0xd23047ff (rw,non-prefetchable)
  IRQ: 19 (14255 events)
  Module Alias: "pci:v00008086d000027C4sv0000104Dsd000081EFbc01sc01i8f"
  Driver Info #0:
    Driver Status: ata_generic is active
    Driver Activation Cmd: "modprobe ata_generic"
  Driver Info #1:
    Driver Status: pata_acpi is not active
    Driver Activation Cmd: "modprobe pata_acpi"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

28: PCI 1f.3: 0c05 SMBus
  [Created at pci.319]
  Unique ID: nS1_.hRzzETwea3E
  SysFS ID: /devices/pci0000:00/0000:00:1f.3
  SysFS BusID: 0000:00:1f.3
  Hardware Class: unknown
  Model: "Intel 82801G (ICH7 Family) SMBus Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27da "82801G (ICH7 Family) SMBus Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "i801_smbus"
  Driver Modules: "i2c_i801"
  I/O Ports: 0x18e0-0x18ff (rw)
  IRQ: 19 (14255 events)
  Module Alias: "pci:v00008086d000027DAsv0000104Dsd000081EFbc0Csc05i00"
  Driver Info #0:
    Driver Status: i2c_i801 is active
    Driver Activation Cmd: "modprobe i2c_i801"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

29: PCI 100.0: 0300 VGA compatible controller (VGA)
  [Created at pci.319]
  Unique ID: VCu0.UB_vbRP_YAB
  Parent ID: vSkL.CXm9Z53TJqE
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce Go 7600"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0398 "GeForce Go 7600"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xd1000000-0xd1ffffff (rw,non-prefetchable)
  Memory Range: 0xb0000000-0xbfffffff (ro,non-prefetchable)
  Memory Range: 0xd0000000-0xd0ffffff (rw,non-prefetchable)
  I/O Ports: 0x2000-0x2fff (rw)
  IRQ: 16 (38759 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000398sv0000104Dsd000081EFbc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Driver Info #1:
    XFree86 v4 Server Module: nvidia
    3D Support: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)

30: PCI 600.0: 0282 WLAN controller
  [Created at pci.319]
  Unique ID: y9sn.BdHDkkpwO+2
  Parent ID: hoOk._qXHWB+e3vC
  SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:06:00.0
  SysFS BusID: 0000:06:00.0
  Hardware Class: network
  Model: "Intel PRO/Wireless 3945ABG [Golan] Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x4222 "PRO/Wireless 3945ABG [Golan] Network Connection"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1051 
  Revision: 0x02
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xcc000000-0xcc000fff (rw,non-prefetchable)
  IRQ: 46 (35502 events)
  HW Address: 00:19:d2:13:b5:d4
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 34 36 38 40 42 44 46 48 52 56 60 64 100 104 108 112 116 120 124
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d00004222sv00008086sd00001051bc02sc80i00"
  Driver Info #0:
    Driver Status: iwl3945 is active
    Driver Activation Cmd: "modprobe iwl3945"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (PCI bridge)

31: PCI a03.0: 0607 CardBus bridge
  [Created at pci.319]
  Unique ID: rDrj.xivG4Wo8tf4
  Parent ID: 6NW+.OgV+9q5j5J4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:0a:03.0
  SysFS BusID: 0000:0a:03.0
  Hardware Class: bridge
  Model: "Texas Instruments PCIxx12 Cardbus Controller"
  Vendor: pci 0x104c "Texas Instruments"
  Device: pci 0x8039 "PCIxx12 Cardbus Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Driver: "yenta_cardbus"
  Driver Modules: "yenta_socket"
  Memory Range: 0x84000000-0x84000fff (rw,non-prefetchable)
  IRQ: 16 (38759 events)
  Module Alias: "pci:v0000104Cd00008039sv0000104Dsd000081EFbc06sc07i00"
  Driver Info #0:
    Driver Status: yenta_socket is active
    Driver Activation Cmd: "modprobe yenta_socket"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #24 (PCI bridge)

32: PCI a03.1: 0c00 FireWire (IEEE 1394) (OHCI)
  [Created at pci.319]
  Unique ID: jYKZ.BZudSLNZ03B
  Parent ID: 6NW+.OgV+9q5j5J4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:0a:03.1
  SysFS BusID: 0000:0a:03.1
  Hardware Class: firewire controller
  Model: "Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller"
  Vendor: pci 0x104c "Texas Instruments"
  Device: pci 0x803a "PCIxx12 OHCI Compliant IEEE 1394 Host Controller"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Driver: "firewire_ohci"
  Driver Modules: "firewire_ohci"
  Memory Range: 0xd2006000-0xd20067ff (rw,non-prefetchable)
  Memory Range: 0xd2000000-0xd2003fff (rw,non-prefetchable)
  IRQ: 16 (38759 events)
  Module Alias: "pci:v0000104Cd0000803Asv0000104Dsd000081EFbc0Csc00i10"
  Driver Info #0:
    Driver Status: ohci1394 is not active
    Driver Activation Cmd: "modprobe ohci1394"
  Driver Info #1:
    Driver Status: firewire_ohci is active
    Driver Activation Cmd: "modprobe firewire_ohci"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #24 (PCI bridge)

33: PCI a03.2: 0180 Storage controller
  [Created at pci.319]
  Unique ID: atpO.HgM6ZcCuXrB
  Parent ID: 6NW+.OgV+9q5j5J4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:0a:03.2
  SysFS BusID: 0000:0a:03.2
  Hardware Class: storage
  Model: "Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)"
  Vendor: pci 0x104c "Texas Instruments"
  Device: pci 0x803b "5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Driver: "tifm_7xx1"
  Driver Modules: "tifm_7xx1"
  Memory Range: 0xd2004000-0xd2004fff (rw,non-prefetchable)
  IRQ: 17 (41 events)
  Module Alias: "pci:v0000104Cd0000803Bsv0000104Dsd000081EFbc01sc80i00"
  Driver Info #0:
    Driver Status: tifm_7xx1 is active
    Driver Activation Cmd: "modprobe tifm_7xx1"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #24 (PCI bridge)

34: PCI a08.0: 0200 Ethernet controller
  [Created at pci.319]
  Unique ID: rBUF.5suO_9ekl50
  Parent ID: 6NW+.OgV+9q5j5J4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:0a:08.0
  SysFS BusID: 0000:0a:08.0
  Hardware Class: network
  Model: "Intel PRO/100 VE Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x1092 "PRO/100 VE Network Connection"
  SubVendor: pci 0x104d "Sony Corporation"
  SubDevice: pci 0x81ef 
  Revision: 0x02
  Driver: "e100"
  Driver Modules: "e100"
  Device File: eth0
  Memory Range: 0xd2005000-0xd2005fff (rw,non-prefetchable)
  I/O Ports: 0x7000-0x7fff (rw)
  IRQ: 20 (328 events)
  HW Address: 00:13:a9:84:33:75
  Link detected: no
  Module Alias: "pci:v00008086d00001092sv0000104Dsd000081EFbc02sc00i00"
  Driver Info #0:
    Driver Status: e100 is active
    Driver Activation Cmd: "modprobe e100"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #24 (PCI bridge)

35: IDE 200.0: 10600 Disk
  [Created at block.245]
  Unique ID: 3OOL.HkjxkHQtYj8
  Parent ID: w7Y8.L+8r_DG+aY2
  SysFS ID: /class/block/sda
  SysFS BusID: 2:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0
  Hardware Class: disk
  Model: "FUJITSU MHV2200B"
  Vendor: "FUJITSU"
  Device: "MHV2200B"
  Revision: "0000"
  Serial ID: "NY06T6B266KU"
  Driver: "ata_piix", "sd"
  Driver Modules: "ata_piix"
  Device File: /dev/sda
  Device Files: /dev/sda, /dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU, /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY06T6B266KU, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0, /dev/disk/by-id/wwn-0x500000e040072360
  Device Number: block 8:0-8:15
  BIOS id: 0x80
  Geometry (Logical): CHS 24321/255/63
  Size: 390721968 sectors a 512 bytes
  Capacity: 186 GB (200049647616 bytes)
  Geometry (BIOS EDD): CHS 387621/16/63
  Size (BIOS EDD): 390721968 sectors
  Geometry (BIOS Legacy): CHS 1023/255/63
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #27 (IDE interface)

36: None 00.0: 11300 Partition
  [Created at block.414]
  Unique ID: bdUI.SE1wIdpsiiC
  Parent ID: 3OOL.HkjxkHQtYj8
  SysFS ID: /class/block/sda/sda1
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda1
  Device Files: /dev/sda1, /dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part1, /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY06T6B266KU-part1, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1, /dev/disk/by-uuid/fcc8db8f-fab6-49de-a81f-a91d990761e2, /dev/disk/by-id/wwn-0x500000e040072360-part1
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #35 (Disk)

37: None 00.0: 11300 Partition
  [Created at block.414]
  Unique ID: 2pkM.SE1wIdpsiiC
  Parent ID: 3OOL.HkjxkHQtYj8
  SysFS ID: /class/block/sda/sda2
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda2
  Device Files: /dev/sda2, /dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part2, /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY06T6B266KU-part2, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2, /dev/disk/by-uuid/36025d6d-d9e8-49f9-a49d-7b54806c79d9, /dev/disk/by-id/wwn-0x500000e040072360-part2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #35 (Disk)

38: None 00.0: 11300 Partition
  [Created at block.414]
  Unique ID: W__Q.SE1wIdpsiiC
  Parent ID: 3OOL.HkjxkHQtYj8
  SysFS ID: /class/block/sda/sda3
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda3
  Device Files: /dev/sda3, /dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part3, /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY06T6B266KU-part3, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part3, /dev/disk/by-uuid/34c5d433-c9f2-4c63-b5ed-f68ef1c96f8c, /dev/disk/by-id/wwn-0x500000e040072360-part3
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #35 (Disk)

39: SCSI 00.0: 10602 CD-ROM (DVD)
  [Created at block.249]
  Unique ID: KD9E.uB1ZBHvcZg1
  Parent ID: 3p2J.BFqDgBkF5u7
  SysFS ID: /class/block/sr0
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
  Hardware Class: cdrom
  Model: "MATSHITA DVD-RAM UJ-850S"
  Vendor: "MATSHITA"
  Device: "DVD-RAM UJ-850S"
  Revision: "1.60"
  Driver: "ata_piix", "sr"
  Driver Modules: "ata_piix"
  Device File: /dev/sr0 (/dev/sg0)
  Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-MATSHITADVD-RAM_UJ-850S_HA98_224662, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw
  Device Number: block 11:0 (char 21:0)
  Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W
  Drive status: no medium
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #26 (IDE interface)
  Drive Speed: 24

40: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: k4bc.9T1GDCLyFd9
  Parent ID: 5YuN.xDTFH3PCKj0
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 3.1.0-1.2-desktop ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "3.01"
  Serial ID: "0000:00:1d.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0301dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #23 (USB Controller)

41: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: pBe4.v+N+B0xY+P6
  Parent ID: 1GTX.NZ544jRdhLA
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "3.01"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

42: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: uIhY.gkSaZmjGyhD
  Parent ID: vayM.uz1qYHZKDkA
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "3.01"
  Serial ID: "0000:00:1d.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #20 (USB Controller)

43: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: zPk0.RTX9xWW_uz4
  Parent ID: mvRC.PO_Z1sg1l6B
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "3.01"
  Serial ID: "0000:00:1d.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (USB Controller)

44: USB 00.0: 10a00 Hub
  [Created at usb.122]
  Unique ID: 2XnU.CCckIHJirFC
  Parent ID: eEx1.wowJWQokGVB
  SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
  SysFS BusID: 5-0:1.0
  Hardware Class: hub
  Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "3.01"
  Serial ID: "0000:00:1d.3"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #22 (USB Controller)

45: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: zFuK.B_1Hb9Qsm00
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0
  SysFS BusID: 1-8:1.0
  Hardware Class: unknown
  Model: "Ricoh Unclassified device"
  Hotplug: USB
  Vendor: usb 0x05ca "Ricoh Co., Ltd"
  Device: usb 0x1836 
  Revision: "1.00"
  Driver: "r5u870"
  Driver Modules: "r5u870"
  Speed: 480 Mbps
  Module Alias: "usb:v05CAp1836d0100dcEFdsc02dp01ic0Eisc01ip00"
  Driver Info #0:
    Driver Status: r5u870 is active
    Driver Activation Cmd: "modprobe r5u870"
  Driver Info #1:
    Driver Status: uvcvideo is not active
    Driver Activation Cmd: "modprobe uvcvideo"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #40 (Hub)

47: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  Unique ID: KRJj.Dyw_vRftffF
  Parent ID: uIhY.gkSaZmjGyhD
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
  SysFS BusID: 3-1:1.0
  Hardware Class: mouse
  Model: "Logitech USB Receiver"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0xc526 "USB Receiver"
  Revision: "5.00"
  Compatible to: int 0x0210 0x0028
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse2)
  Device Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event3, /dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Receiver-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
  Device Number: char 13:63 (char 13:34)
  Speed: 12 Mbps
  Module Alias: "usb:v046DpC526d0500dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    Buttons: 8
    Wheels: 2
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #42 (Hub)

48: USB 00.1: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: ncZn.ARdcn0GLfi2
  Parent ID: uIhY.gkSaZmjGyhD
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1
  SysFS BusID: 3-1:1.1
  Hardware Class: unknown
  Model: "Logitech USB Receiver"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0xc526 "USB Receiver"
  Revision: "5.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event4
  Device Files: /dev/input/event4, /dev/input/by-id/usb-Logitech_USB_Receiver-event-if01, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-event
  Device Number: char 13:68
  Speed: 12 Mbps
  Module Alias: "usb:v046DpC526d0500dc00dsc00dp00ic03isc00ip00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #42 (Hub)

49: USB 00.0: 11500 Bluetooth Device
  [Created at usb.122]
  Unique ID: PYMB.djfIxr3mKg2
  Parent ID: zPk0.RTX9xWW_uz4
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0
  SysFS BusID: 4-1:1.0
  Hardware Class: bluetooth
  Model: "Alps Electric UGX"
  Hotplug: USB
  Vendor: usb 0x044e "Alps Electric Co., Ltd"
  Device: usb 0x300d "UGX"
  Revision: "19.15"
  Serial ID: "01f382b6"
  Driver: "btusb"
  Driver Modules: "btusb"
  Speed: 12 Mbps
  Module Alias: "usb:v044Ep300Dd1915dcE0dsc01dp01icE0isc01ip01"
  Driver Info #0:
    Driver Status: btusb is active
    Driver Activation Cmd: "modprobe btusb"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #43 (Hub)

52: PS/2 00.0: 10800 Keyboard
  [Created at input.226]
  Unique ID: nLyy.+49ps10DtUF
  Hardware Class: keyboard
  Model: "AT Translated Set 2 keyboard"
  Vendor: 0x0001 
  Device: 0x0001 "AT Translated Set 2 keyboard"
  Compatible to: int 0x0211 0x0001
  Device File: /dev/input/event0
  Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd
  Device Number: char 13:64
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=yes, avail=yes, need=yes, active=unknown

53: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.249]
  Unique ID: AH6Q.5+smWHVjPI3
  Hardware Class: mouse
  Model: "PS/2 Mouse"
  Vendor: 0x0002 
  Device: 0x0008 "PS/2 Mouse"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
  Device Number: char 13:63 (char 13:32)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

54: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.249]
  Unique ID: AH6Q.5+smWHVjPI3
  Hardware Class: mouse
  Model: "AlpsPS/2 ALPS GlidePoint"
  Vendor: 0x0002 
  Device: 0x0008 "AlpsPS/2 ALPS GlidePoint"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse1)
  Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
  Device Number: char 13:63 (char 13:33)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

55: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.249]
  Unique ID: AH6Q.GK9dutOpov5
  Hardware Class: mouse
  Model: "Sony Vaio Jogdial"
  Vendor: 0x104d 
  Device: "Sony Vaio Jogdial"
  Compatible to: int 0x0210 0x0011
  Device File: /dev/input/mice (/dev/input/mouse3)
  Device Files: /dev/input/mice, /dev/input/mouse3, /dev/input/event9
  Device Number: char 13:63 (char 13:35)
  Driver Info #0:
    Buttons: 1
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

56: None 00.0: 10103 CPU
  [Created at cpu.301]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "GenuineIntel"
  Model: 6.15.6 "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,dts,tpr_shadow
  Clock: 2000 MHz
  BogoMips: 3989.36
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

57: None 01.0: 10103 CPU
  [Created at cpu.301]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "GenuineIntel"
  Model: 6.15.6 "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,dts,tpr_shadow
  Clock: 2000 MHz
  BogoMips: 3989.83
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

58: None 00.0: 10000 Monitor
  [Created at fb.71]
  Unique ID: rdCR.EY_qmtb9YY0
  Hardware Class: monitor
  Model: "Generic Monitor"
  Vendor: "Generic"
  Device: "Monitor"
  Resolution: 1024x768@76Hz
  Driver Info #0:
    Max. Resolution: 1024x768
    Vert. Sync Range: 50-90 Hz
    Hor. Sync Range: 31-61 kHz
  Config Status: cfg=no, avail=yes, need=no, active=unknown

59: None 00.0: 10700 Loopback
  [Created at net.124]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown

60: None 00.0: 1070a WLAN
  [Created at net.124]
  Unique ID: AYEt.QXn1l67RSa1
  Parent ID: y9sn.BdHDkkpwO+2
  SysFS ID: /class/net/wlan0
  SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:06:00.0
  Hardware Class: network interface
  Model: "WLAN network interface"
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wlan0
  HW Address: 00:19:d2:13:b5:d4
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #30 (WLAN controller)

61: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.5suO_9ekl50
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:0a:08.0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "e100"
  Driver Modules: "e100"
  Device File: eth0
  HW Address: 00:13:a9:84:33:75
  Link detected: no
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #34 (Ethernet controller)
linux-p6tj:/home/jadwiga #

Z.

Zuzia · 6 Jan. 2012

Und weiter:

Code:

[code]linux-p6tj:/home/jadwiga # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1.2-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0)
[ 0.000000] Command line: root=/dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part1 splash=silent quiet vga=0x317
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c2000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe9a000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Sony Corporation VGN-FE41Z/VAIO, BIOS R0200J3 02/05/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fe90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7320] f7320
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe90000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe90000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe90000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 3749d000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7250 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 000000007fe922b6 00054 (v01 Sony VAIO 20070205 PTL 00000000)
[ 0.000000] ACPI: FACP 000000007fe99c9a 00084 (v02 Sony VAIO 20070205 PTL 0000005A)
[ 0.000000] ACPI: DSDT 000000007fe9416d 05B2D (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: FACS 000000007fe9afc0 00040
[ 0.000000] ACPI: APIC 000000007fe99d1e 00068 (v01 Sony VAIO 20070205 PTL 0000005A)
[ 0.000000] ACPI: HPET 000000007fe99d86 00038 (v01 Sony VAIO 20070205 PTL 0000005A)
[ 0.000000] ACPI: MCFG 000000007fe99dbe 0003C (v01 Sony VAIO 20070205 PTL 0000005A)
[ 0.000000] ACPI: SLIC 000000007fe99dfa 00176 (v01 Sony VAIO 20070205 PTL 01000000)
[ 0.000000] ACPI: APIC 000000007fe99f70 00068 (v01 Sony VAIO 20070205 PTL 00000000)
[ 0.000000] ACPI: BOOT 000000007fe99fd8 00028 (v01 Sony VAIO 20070205 PTL 00000001)
[ 0.000000] ACPI: SSDT 000000007fe939e1 0078C (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: SSDT 000000007fe93345 0069C (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: SSDT 000000007fe928a0 0025F (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: SSDT 000000007fe927fa 000A6 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: SSDT 000000007fe9230a 004F0 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe90000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fe90000
[ 0.000000] NODE_DATA [000000007fe7c000 - 000000007fe8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe90
[ 0.000000] On node 0 totalpages: 523807
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7107 pages used for memmap
[ 0.000000] DMA32 zone: 512717 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c2000
[ 0.000000] PM: Registered nosave memory: 00000000000c2000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78208 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s78208 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516639
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part1 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 2038272k/2095680k available (5791k kernel code, 452k absent, 56956k reserved, 7776k data, 940k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.683 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.36 BogoMIPS (lpj=1994683)
[ 0.001009] pid_max: default: 32768 minimum: 301
[ 0.001069] Security Framework initialized
[ 0.001095] AppArmor: AppArmor initialized
[ 0.002228] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003626] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004406] Mount-cache hash table entries: 256
[ 0.004580] Initializing cgroup subsys cpuacct
[ 0.004585] Initializing cgroup subsys memory
[ 0.004609] Initializing cgroup subsys devices
[ 0.004612] Initializing cgroup subsys freezer
[ 0.004614] Initializing cgroup subsys net_cls
[ 0.004616] Initializing cgroup subsys blkio
[ 0.004626] Initializing cgroup subsys perf_event
[ 0.004667] CPU: Physical Processor ID: 0
[ 0.004668] CPU: Processor Core ID: 0
[ 0.004671] mce: CPU supports 6 MCE banks
[ 0.004681] CPU0: Thermal monitoring enabled (TM2)
[ 0.004686] using mwait in idle threads.
[ 0.005848] ACPI: Core revision 20110623
[ 0.013275] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023285] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.023998] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.023998] PEBS disabled due to CPU errata.
[ 0.023998] ... version: 2
[ 0.023998] ... bit width: 40
[ 0.023998] ... generic registers: 2
[ 0.023998] ... value mask: 000000ffffffffff
[ 0.023998] ... max period: 000000007fffffff
[ 0.023998] ... fixed-purpose events: 3
[ 0.023998] ... event mask: 0000000700000003
[ 0.031467] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.039015] Booting Node 0, Processors #1 Ok.
[ 0.039019] smpboot cpu 1: start_ip = 9a000
[ 0.111036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.112995] Brought up 2 CPUs
[ 0.112998] Total of 2 processors activated (7979.20 BogoMIPS).
[ 0.114097] devtmpfs: initialized
[ 0.115508] PM: Registering ACPI NVS region at 7fe9a000 (417792 bytes)
[ 0.115508] print_constraints: dummy:
[ 0.115508] RTC time: 21:33:52, date: 01/06/12
[ 0.115508] NET: Registered protocol family 16
[ 0.116114] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116118] ACPI: bus type pci registered
[ 0.116188] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116191] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.151202] PCI: Using configuration type 1 for base access
[ 0.152155] bio: create slab <bio-0> at 0
[ 0.152155] ACPI: Added _OSI(Module Device)
[ 0.152155] ACPI: Added _OSI(Processor Device)
[ 0.152155] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152155] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153935] ACPI: EC: Look up EC in DSDT
[ 0.157775] ACPI: SSDT 000000007fe93040 0023D (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.158154] ACPI: Dynamic OEM Table Load:
[ 0.158158] ACPI: SSDT (null) 0023D (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.158552] ACPI: SSDT 000000007fe92aff 004BC (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.158898] ACPI: Dynamic OEM Table Load:
[ 0.158901] ACPI: SSDT (null) 004BC (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.159228] ACPI: SSDT 000000007fe9327d 000C8 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.159587] ACPI: Dynamic OEM Table Load:
[ 0.159591] ACPI: SSDT (null) 000C8 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.159719] ACPI: SSDT 000000007fe92fbb 00085 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.160070] ACPI: Dynamic OEM Table Load:
[ 0.160074] ACPI: SSDT (null) 00085 (v01 Sony VAIO 20070205 PTL 20050228)
[ 0.363040] ACPI: Interpreter enabled
[ 0.363045] ACPI: (supports S0 S3 S4 S5)
[ 0.363069] ACPI: Using IOAPIC for interrupt routing
[ 0.374340] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.379941] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.382079] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.382082] HEST: Table not found.
[ 0.382085] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.382642] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.383511] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.383514] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.383517] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.383520] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.383523] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.383525] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.383529] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.383531] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.383544] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.383593] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.383631] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.383635] pci 0000:00:01.0: PME# disabled
[ 0.383701] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.383723] pci 0000:00:1b.0: reg 10: [mem 0xd2300000-0xd2303fff 64bit]
[ 0.383806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.383811] pci 0000:00:1b.0: PME# disabled
[ 0.383841] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.383926] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.383931] pci 0000:00:1c.0: PME# disabled
[ 0.383971] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.384056] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.384061] pci 0000:00:1c.1: PME# disabled
[ 0.384094] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.384179] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.384184] pci 0000:00:1c.2: PME# disabled
[ 0.384217] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.384302] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.384307] pci 0000:00:1c.3: PME# disabled
[ 0.384340] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.384397] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.384438] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.384494] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.384537] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.384593] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
[ 0.384634] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.384690] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f]
[ 0.384742] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.384766] pci 0000:00:1d.7: reg 10: [mem 0xd2304000-0xd23043ff]
[ 0.384854] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.384860] pci 0000:00:1d.7: PME# disabled
[ 0.384886] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.384978] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.385091] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.385098] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.385148] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.385164] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.385176] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.385188] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.385200] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.385212] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f]
[ 0.385259] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.385280] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.385292] pci 0000:00:1f.2: reg 14: [io 0x18ac-0x18af]
[ 0.385305] pci 0000:00:1f.2: reg 18: [io 0x18c0-0x18c7]
[ 0.385316] pci 0000:00:1f.2: reg 1c: [io 0x18a8-0x18ab]
[ 0.385329] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.385341] pci 0000:00:1f.2: reg 24: [mem 0xd2304400-0xd23047ff]
[ 0.385375] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.385380] pci 0000:00:1f.2: PME# disabled
[ 0.385399] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.385472] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.385570] pci 0000:01:00.0: [10de:0398] type 0 class 0x000300
[ 0.385586] pci 0000:01:00.0: reg 10: [mem 0xd1000000-0xd1ffffff]
[ 0.385604] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.385621] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.385633] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.385645] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.385701] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.385705] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.385709] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.385713] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.385774] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.385779] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.385784] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.385792] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.385852] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.385857] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.385862] pci 0000:00:1c.1: bridge window [mem 0xca000000-0xcbffffff]
[ 0.385870] pci 0000:00:1c.1: bridge window [mem 0xc2000000-0xc3ffffff 64bit pref]
[ 0.385997] pci 0000:06:00.0: [8086:4222] type 0 class 0x000280
[ 0.386053] pci 0000:06:00.0: reg 10: [mem 0xcc000000-0xcc000fff]
[ 0.386393] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.386406] pci 0000:06:00.0: PME# disabled
[ 0.386495] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.386500] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.386505] pci 0000:00:1c.2: bridge window [mem 0xcc000000-0xcdffffff]
[ 0.386513] pci 0000:00:1c.2: bridge window [mem 0xc4000000-0xc5ffffff 64bit pref]
[ 0.386575] pci 0000:00:1c.3: PCI bridge to [bus 08-09]
[ 0.386580] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.386586] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xcfffffff]
[ 0.386594] pci 0000:00:1c.3: bridge window [mem 0xc6000000-0xc7ffffff 64bit pref]
[ 0.386648] pci 0000:0a:03.0: [104c:8039] type 2 class 0x000607
[ 0.386674] pci 0000:0a:03.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.386702] pci 0000:0a:03.0: supports D1 D2
[ 0.386705] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.386711] pci 0000:0a:03.0: PME# disabled
[ 0.386737] pci 0000:0a:03.1: [104c:803a] type 0 class 0x000c00
[ 0.386762] pci 0000:0a:03.1: reg 10: [mem 0xd2006000-0xd20067ff]
[ 0.386777] pci 0000:0a:03.1: reg 14: [mem 0xd2000000-0xd2003fff]
[ 0.386867] pci 0000:0a:03.1: supports D1 D2
[ 0.386869] pci 0000:0a:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.386875] pci 0000:0a:03.1: PME# disabled
[ 0.386900] pci 0000:0a:03.2: [104c:803b] type 0 class 0x000180
[ 0.386925] pci 0000:0a:03.2: reg 10: [mem 0xd2004000-0xd2004fff]
[ 0.387026] pci 0000:0a:03.2: supports D1 D2
[ 0.387029] pci 0000:0a:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.387035] pci 0000:0a:03.2: PME# disabled
[ 0.387074] pci 0000:0a:08.0: [8086:1092] type 0 class 0x000200
[ 0.387095] pci 0000:0a:08.0: reg 10: [mem 0xd2005000-0xd2005fff]
[ 0.387107] pci 0000:0a:08.0: reg 14: [io 0x7000-0x703f]
[ 0.387180] pci 0000:0a:08.0: supports D1 D2
[ 0.387182] pci 0000:0a:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.387187] pci 0000:0a:08.0: PME# disabled
[ 0.387236] pci 0000:00:1e.0: PCI bridge to [bus 0a-0b] (subtractive decode)
[ 0.387242] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.387247] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.387255] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.387258] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.387313] pci_bus 0000:0b: [bus 0b-0e] partially hidden behind transparent bridge 0000:0a [bus 0a-0b]
[ 0.387352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.387518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.387592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.387654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.387716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.387782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.387872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.388137] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.388257] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[ 0.388260] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.395186] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.395256] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.395323] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.395390] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.395459] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.395525] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.395592] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 0.395657] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.395723] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.395723] vgaarb: loaded
[ 0.395723] vgaarb: bridge control possible 0000:01:00.0
[ 0.395967] SCSI subsystem initialized
[ 0.395977] libata version 3.00 loaded.
[ 0.395990] usbcore: registered new interface driver usbfs
[ 0.396008] usbcore: registered new interface driver hub
[ 0.396013] usbcore: registered new device driver usb
[ 0.396013] PCI: Using ACPI for IRQ routing
[ 0.406923] PCI: pci_cache_line_size set to 64 bytes
[ 0.407041] Expanded resource reserved due to conflict with Video ROM
[ 0.407045] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.407048] reserve RAM buffer: 000000007fe90000 - 000000007fffffff
[ 0.407158] NetLabel: Initializing
[ 0.407160] NetLabel: domain hash size = 128
[ 0.407162] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.407176] NetLabel: unlabeled traffic allowed by default
[ 0.407182] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.407188] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.407193] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.411968] Switching to clocksource hpet
[ 0.412821] Switched to NOHz mode on CPU #0
[ 0.412915] Switched to NOHz mode on CPU #1
[ 0.415174] AppArmor: AppArmor Filesystem Enabled
[ 0.415200] pnp: PnP ACPI init
[ 0.415215] ACPI: bus type pnp registered
[ 0.422552] pnp 00:00: [bus 00-ff]
[ 0.422555] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.422558] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.422560] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.422564] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.422567] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.422569] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.422571] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.422574] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.422576] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.422578] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.422580] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.422583] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.422585] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.422587] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.422590] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.422592] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.422594] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.422597] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.422599] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.422677] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.422692] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.422695] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.422697] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.422699] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.422701] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.422704] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.422706] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.422765] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.422768] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.422772] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.422775] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.422778] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.422781] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.422784] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.422788] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423077] pnp 00:02: [io 0x0000-0x001f]
[ 0.423080] pnp 00:02: [io 0x0081-0x0091]
[ 0.423082] pnp 00:02: [io 0x0093-0x009f]
[ 0.423084] pnp 00:02: [io 0x00c0-0x00df]
[ 0.423086] pnp 00:02: [dma 4]
[ 0.423131] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.423144] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.423190] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.423286] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.423332] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.423348] pnp 00:05: [io 0x00f0]
[ 0.423359] pnp 00:05: [irq 13]
[ 0.423406] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.423438] pnp 00:06: [io 0x002e-0x002f]
[ 0.423440] pnp 00:06: [io 0x0061]
[ 0.423442] pnp 00:06: [io 0x0063]
[ 0.423444] pnp 00:06: [io 0x0065]
[ 0.423446] pnp 00:06: [io 0x0067]
[ 0.423448] pnp 00:06: [io 0x0070]
[ 0.423450] pnp 00:06: [io 0x0080]
[ 0.423452] pnp 00:06: [io 0x0092]
[ 0.423454] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.423456] pnp 00:06: [io 0x0680-0x06ff]
[ 0.423458] pnp 00:06: [io 0x0800-0x080f]
[ 0.423460] pnp 00:06: [io 0x1000-0x107f]
[ 0.423461] pnp 00:06: [io 0x1180-0x11bf]
[ 0.423463] pnp 00:06: [io 0x1640-0x164f]
[ 0.423465] pnp 00:06: [io 0xfe00-0xfe7f]
[ 0.423467] pnp 00:06: [io 0xfe80-0xfeff]
[ 0.423551] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.423554] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.423557] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.423560] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.423563] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.423566] system 00:06: [io 0xfe00-0xfe7f] has been reserved
[ 0.423569] system 00:06: [io 0xfe80-0xfeff] has been reserved
[ 0.423572] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423585] pnp 00:07: [io 0x0070-0x0077]
[ 0.423591] pnp 00:07: [irq 8]
[ 0.423637] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.423659] pnp 00:08: [io 0x0060]
[ 0.423661] pnp 00:08: [io 0x0064]
[ 0.423667] pnp 00:08: [irq 1]
[ 0.423716] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.423732] pnp 00:09: [irq 12]
[ 0.423780] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[ 0.423816] pnp: PnP ACPI: found 10 devices
[ 0.423818] ACPI: ACPI bus type pnp unregistered
[ 0.431662] PCI: max bus depth: 2 pci_try_num: 3
[ 0.431727] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.431731] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.431734] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.431737] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.431741] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.431745] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.431750] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.431754] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.431760] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.431766] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.431774] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.431777] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.431783] pci 0000:00:1c.1: bridge window [mem 0xca000000-0xcbffffff]
[ 0.431789] pci 0000:00:1c.1: bridge window [mem 0xc2000000-0xc3ffffff 64bit pref]
[ 0.431797] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[ 0.431801] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.431807] pci 0000:00:1c.2: bridge window [mem 0xcc000000-0xcdffffff]
[ 0.431812] pci 0000:00:1c.2: bridge window [mem 0xc4000000-0xc5ffffff 64bit pref]
[ 0.431820] pci 0000:00:1c.3: PCI bridge to [bus 08-09]
[ 0.431823] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.431830] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xcfffffff]
[ 0.431835] pci 0000:00:1c.3: bridge window [mem 0xc6000000-0xc7ffffff 64bit pref]
[ 0.431847] pci 0000:0a:03.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
[ 0.431853] pci 0000:0a:03.0: BAR 0: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff])
[ 0.431857] pci 0000:0a:03.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.431860] pci 0000:0a:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.431863] pci 0000:0a:03.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.431866] pci 0000:0a:03.0: BAR 13: assigned [io 0x7800-0x78ff]
[ 0.431869] pci 0000:0a:03.0: CardBus bridge to [bus 0b-0e]
[ 0.431871] pci 0000:0a:03.0: bridge window [io 0x7800-0x78ff]
[ 0.431876] pci 0000:0a:03.0: bridge window [io 0x7400-0x74ff]
[ 0.431882] pci 0000:0a:03.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.431888] pci 0000:0a:03.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.431893] pci 0000:00:1e.0: PCI bridge to [bus 0a-0b]
[ 0.431897] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.431903] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.431908] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.431928] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.431933] pci 0000:00:01.0: setting latency timer to 64
[ 0.431944] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.431949] pci 0000:00:1c.0: setting latency timer to 64
[ 0.431957] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.431962] pci 0000:00:1c.1: setting latency timer to 64
[ 0.431973] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.431978] pci 0000:00:1c.2: setting latency timer to 64
[ 0.431988] pci 0000:00:1c.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.431993] pci 0000:00:1c.3: setting latency timer to 64
[ 0.431999] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.432015] pci 0000:00:1e.0: setting latency timer to 64
[ 0.432024] pci 0000:0a:03.0: enabling device (0000 -> 0003)
[ 0.432029] pci 0000:0a:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.432037] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.432040] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.432043] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.432045] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.432048] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.432050] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.432053] pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc9ffffff]
[ 0.432055] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.432058] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.432060] pci_bus 0000:04: resource 1 [mem 0xca000000-0xcbffffff]
[ 0.432063] pci_bus 0000:04: resource 2 [mem 0xc2000000-0xc3ffffff 64bit pref]
[ 0.432065] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.432068] pci_bus 0000:06: resource 1 [mem 0xcc000000-0xcdffffff]
[ 0.432070] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc5ffffff 64bit pref]
[ 0.432073] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
[ 0.432075] pci_bus 0000:08: resource 1 [mem 0xce000000-0xcfffffff]
[ 0.432078] pci_bus 0000:08: resource 2 [mem 0xc6000000-0xc7ffffff 64bit pref]
[ 0.432080] pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
[ 0.432083] pci_bus 0000:0a: resource 1 [mem 0xd2000000-0xd20fffff]
[ 0.432085] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.432088] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.432090] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.432092] pci_bus 0000:0b: resource 0 [io 0x7800-0x78ff]
[ 0.432095] pci_bus 0000:0b: resource 1 [io 0x7400-0x74ff]
[ 0.432097] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.432100] pci_bus 0000:0b: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.432175] NET: Registered protocol family 2
[ 0.432305] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.433113] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.435532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.436346] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.436349] TCP reno registered
[ 0.436360] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.436393] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.436571] NET: Registered protocol family 1
[ 0.436738] pci 0000:01:00.0: Boot video device
[ 0.436764] PCI: CLS 64 bytes, default 64
[ 0.436835] Unpacking initramfs...
[ 0.678784] Freeing initrd memory: 11596k freed
[ 0.685180] Simple Boot Flag at 0x36 set to 0x1
[ 0.685845] audit: initializing netlink socket (disabled)
[ 0.685865] type=2000 audit(1325885632.684:1): initialized
[ 0.715142] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.727567] VFS: Disk quotas dquot_6.5.2
[ 0.727610] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.727886] msgmni has been set to 4003
[ 0.728171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.728212] io scheduler noop registered
[ 0.728215] io scheduler deadline registered
[ 0.728236] io scheduler cfq registered (default)
[ 0.728388] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.728426] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.728484] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.728539] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.728618] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.728672] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.728752] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.728806] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.728886] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.728940] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.729120] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.729122] vesafb: scrolling: redraw
[ 0.729124] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.729695] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010980000, using 3072k, total 131072k
[ 0.729878] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.729880] bootsplash: silentjpeg size 89863 bytes
[ 0.738738] bootsplash: ...found (1024x768, 36220 bytes, v3).
[ 0.782729] Console: switching to colour frame buffer device 124x44
[ 0.826284] fb0: VESA VGA frame buffer device
[ 0.826302] intel_idle: MWAIT substates: 0x22220
[ 0.826304] intel_idle: does not run on family 6 model 15
[ 0.826351] ERST: Table is not found!
[ 0.826353] GHES: HEST is not enabled!
[ 0.826454] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.947383] Non-volatile memory driver v1.3
[ 0.947386] Linux agpgart interface v0.103
[ 0.947704] ata_piix 0000:00:1f.1: version 2.13
[ 0.947718] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.947753] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.948106] scsi0 : ata_piix
[ 0.948219] scsi1 : ata_piix
[ 0.948706] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 0.948709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 0.948759] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.948765] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[code]
[ 0.948815] ata2: port disabled--ignoring

Zuzia · 6 Jan. 2012

...und noch weiter:

Code:

[    1.099267] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.099544] scsi2 : ata_piix
[    1.099630] scsi3 : ata_piix
[    1.100424] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18ac bmdma 0x18b0 irq 19
[    1.100428] ata4: SATA max UDMA/133 cmd 0x18c0 ctl 0x18a8 bmdma 0x18b8 irq 19
[    1.100507] Fixed MDIO Bus: probed
[    1.100513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.100541] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.100555] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.100558] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.100588] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.100618] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.100630] ehci_hcd 0000:00:1d.7: debug port 1
[    1.102397] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
[    1.104522] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.104539] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2304000
[    1.108409] ata1.00: configured for UDMA/33
[    1.111106] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.60 PQ: 0 ANSI: 5
[    1.114015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.114044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.114046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114049] usb usb1: Product: EHCI Host Controller
[    1.114051] usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[    1.114054] usb usb1: SerialNumber: 0000:00:1d.7
[    1.114175] hub 1-0:1.0: USB hub found
[    1.114181] hub 1-0:1.0: 8 ports detected
[    1.114277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.114292] uhci_hcd: USB Universal Host Controller Interface driver
[    1.114321] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.114329] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.114333] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.114341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.114373] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.114416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.114419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114421] usb usb2: Product: UHCI Host Controller
[    1.114424] usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
[    1.114426] usb usb2: SerialNumber: 0000:00:1d.0
[    1.114541] hub 2-0:1.0: USB hub found
[    1.114547] hub 2-0:1.0: 2 ports detected
[    1.114622] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.114629] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.114633] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.114640] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.114681] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[    1.114723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.114726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114728] usb usb3: Product: UHCI Host Controller
[    1.114730] usb usb3: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
[    1.114733] usb usb3: SerialNumber: 0000:00:1d.1
[    1.114834] hub 3-0:1.0: USB hub found
[    1.114839] hub 3-0:1.0: 2 ports detected
[    1.114910] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.114917] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.114921] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.114928] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.114970] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.115024] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.115027] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.115029] usb usb4: Product: UHCI Host Controller
[    1.115031] usb usb4: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
[    1.115034] usb usb4: SerialNumber: 0000:00:1d.2
[    1.115137] hub 4-0:1.0: USB hub found
[    1.115142] hub 4-0:1.0: 2 ports detected
[    1.115217] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.115224] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.115227] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.115236] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.115277] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.115319] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.115321] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.115324] usb usb5: Product: UHCI Host Controller
[    1.115326] usb usb5: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
[    1.115328] usb usb5: SerialNumber: 0000:00:1d.3
[    1.115429] hub 5-0:1.0: USB hub found
[    1.115434] hub 5-0:1.0: 2 ports detected
[    1.115511] Initializing USB Mass Storage driver...
[    1.115541] usbcore: registered new interface driver usb-storage
[    1.115543] USB Mass Storage support registered.
[    1.115554] usbcore: registered new interface driver ums-alauda
[    1.115565] usbcore: registered new interface driver ums-cypress
[    1.115577] usbcore: registered new interface driver ums-datafab
[    1.115588] usbcore: registered new interface driver ums-freecom
[    1.115602] usbcore: registered new interface driver ums-isd200
[    1.115613] usbcore: registered new interface driver ums-jumpshot
[    1.115624] usbcore: registered new interface driver ums-karma
[    1.115635] usbcore: registered new interface driver ums-onetouch
[    1.115646] usbcore: registered new interface driver ums-sddr09
[    1.115657] usbcore: registered new interface driver ums-sddr55
[    1.115668] usbcore: registered new interface driver ums-usbat
[    1.115709] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.120080] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.120110] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.120237] mousedev: PS/2 mouse device common for all mice
[    1.120564] rtc_cmos 00:07: RTC can wake from S4
[    1.120703] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.120736] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.120747] cpuidle: using governor ladder
[    1.120749] cpuidle: using governor menu
[    1.120751] EFI Variables Facility v0.08 2004-May-17
[    1.121032] usbcore: registered new interface driver usbhid
[    1.121034] usbhid: USB HID core driver
[    1.121275] TCP cubic registered
[    1.121333] NET: Registered protocol family 10
[    1.121850] lib80211: common routines for IEEE802.11 drivers
[    1.121853] lib80211_crypt: registered algorithm 'NULL'
[    1.121855] Registering the dns_resolver key type
[    1.121875] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[    1.122032] PM: Checking hibernation image partition /dev/disk/by-id/ata-FUJITSU_MHV2200BT_NY06T6B266KU-part1
[    1.123216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.265382] ata3.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
[    1.265385] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.271380] ata3.00: configured for UDMA/100
[    1.271487] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
[    1.271611] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.271729] sd 2:0:0:0: [sda] Write Protect is off
[    1.271733] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.271778] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.303086]  sda: sda1 sda2 sda3
[    1.303477] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.401750] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[    1.417398] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    1.420651] PM: Hibernation image not present or could not be loaded.
[    1.420669] registered taskstats version 1
[    1.427849]   Magic number: 12:675:600
[    1.427971] rtc_cmos 00:07: setting system clock to 2012-01-06 21:33:53 UTC (1325885633)
[    1.429802] Freeing unused kernel memory: 940k freed
[    1.430076] Write protecting the kernel read-only data: 12288k
[    1.431406] Freeing unused kernel memory: 336k freed
[    1.438569] Freeing unused kernel memory: 2020k freed
[    1.478412] udevd[88]: starting version 173
[    1.530043] ACPI: acpi_idle registered with cpuidle
[    1.546315] ACPI: Invalid active0 threshold
[    1.547905] thermal LNXTHERM:00: registered as thermal_zone0
[    1.547910] ACPI: Thermal Zone [TZ00] (34 C)
[    1.549024] Monitor-Mwait will be used to enter C-1 state
[    1.551346] ACPI: Invalid active0 threshold
[    1.551497] Monitor-Mwait will be used to enter C-2 state
[    1.551513] Marking TSC unstable due to TSC halts in idle
[    1.552056] thermal LNXTHERM:01: registered as thermal_zone1
[    1.552061] ACPI: Thermal Zone [TZ01] (34 C)
[    1.620072] usb 1-8: new high speed USB device number 4 using ehci_hcd
[    1.737614] usb 1-8: New USB device found, idVendor=05ca, idProduct=1836
[    1.737622] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.945051] usb 3-1: new full speed USB device number 2 using uhci_hcd
[    2.039239] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    2.039245] PM: Basic memory bitmaps created
[    2.047603] PM: Basic memory bitmaps freed
[    2.107653] PM: Starting manual resume from disk
[    2.107657] PM: Hibernation image partition 8:1 present
[    2.107658] PM: Looking for hibernation image.
[    2.107738] usb 3-1: New USB device found, idVendor=046d, idProduct=c526
[    2.107742] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.107745] usb 3-1: Product: USB Receiver
[    2.107747] usb 3-1: Manufacturer: Logitech
[    2.108060] PM: Image not found (code -22)
[    2.108062] PM: Hibernation image not present or could not be loaded.
[    2.116046] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
[    2.116249] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[    2.120841] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4
[    2.121138] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[    2.255938] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    2.327061] usb 4-1: new full speed USB device number 2 using uhci_hcd
[    2.507651] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[    2.526041] usb 4-1: New USB device found, idVendor=044e, idProduct=300d
[    2.526045] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.526047] usb 4-1: Product: UGX
[    2.526049] usb 4-1: Manufacturer: ALPS
[    2.526051] usb 4-1: SerialNumber: 01f382b6
[    3.293152] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[    3.573927] systemd[1]: Set hostname to <linux-p6tj.site>.
[    6.058123] systemd-readahead-replay[341]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[    7.399196] boot.localnet[358]: Using boot-specified hostname 'linux-p6tj.site'
[    7.444236] udevd[354]: starting version 173
[   18.231377] boot.localnet[358]: Setting up hostname 'linux-p6tj'..done
[   18.524110] boot.localnet[358]: Setting up loopback interface RTNETLINK answers: File exists
[   18.530893] boot.localnet[358]: ..done
[   18.602071] boot.lvm[427]: Waiting for udev to settle...
[   18.640367] cfg80211: Calling CRDA to update world regulatory domain
[   18.645851] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   18.648090] ACPI: Lid Switch [LID0]
[   18.648169] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   18.651076] ACPI: Power Button [PWRB]
[   18.658289] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   18.662258] ACPI: AC Adapter [ADP1] (on-line)
[   18.701525] intel_rng: FWH not detected
[   18.701649] mtp-probe[494]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1"
[   18.707544] iTCO_vendor_support: vendor-support=0
[   18.708345] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   18.708446] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   18.709091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.709754] sony_laptop: Sony Notebook Control Driver v0.6
[   18.717931] leds_ss4200: no LED devices found
[   18.726757] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   18.729050] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   18.729053] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   18.729147] iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   18.729162] iwl3945 0000:06:00.0: setting latency timer to 64
[   18.732107] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.748944] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/SNY5001:00/input/input8
[   18.749909] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   18.749911] e100: Copyright(c) 1999-2006 Intel Corporation
[   18.749957] e100 0000:0a:08.0: enabling device (0000 -> 0003)
[   18.749978] e100 0000:0a:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   18.752760] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   18.752771] ACPI: Battery Slot [BAT0] (battery absent)
[   18.756702] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.756766] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   18.756798] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   18.774275] mtp-probe[494]: bus: 3, device: 2 was not an MTP device
[   18.774774] input: Sony Vaio Jogdial as /devices/virtual/input/input9
[   18.784722] Bluetooth: Core ver 2.16
[   18.784744] NET: Registered protocol family 31
[   18.784746] Bluetooth: HCI device and connection manager initialized
[   18.784750] Bluetooth: HCI socket layer initialized
[   18.784752] Bluetooth: L2CAP socket layer initialized
[   18.784762] Bluetooth: SCO socket layer initialized
[   18.785447] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   18.789950] mtp-probe[526]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8"
[   18.806674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   18.806680] cdrom: Uniform CD-ROM driver Revision: 3.20
[   18.807199] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   18.814073] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   18.814132] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   18.822435] mtp-probe[526]: bus: 1, device: 4 was not an MTP device
[   18.822670] usbcore: registered new interface driver btusb
[   18.828904] ALSA hda_codec.c:4877 autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:speaker
[   18.828915] ALSA hda_codec.c:4881    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.828919] ALSA hda_codec.c:4885    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   18.828921] ALSA hda_codec.c:4886    mono: mono_out=0x0
[   18.828927] ALSA hda_codec.c:4890    inputs:
[   18.828930] ALSA hda_codec.c:4894  Mic=0xd
[   18.828932] ALSA hda_codec.c:4894  Internal Mic=0x14
[   18.828934] ALSA hda_codec.c:4896 
[   18.829930] ALSA patch_sigmatel.c:3104 stac92xx: dac_nids=1 (0x5/0x0/0x0/0x0/0x0)
[   18.845609] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.845711] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.857113] Linux video capture interface: v2.00
[   18.857689] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1836)
[   18.863019] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[   18.863098] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[   18.863111] uvcvideo: Failed to initialize the device (-5).
[   18.863158] usbcore: registered new interface driver uvcvideo
[   18.863160] USB Video Class driver (1.1.1)
[   18.866194] usbcam: registering driver r5u870 0.11.3
[   18.866219] r5u870-0: Detected Sony VGP-VCC4
[   18.935864] cfg80211: World regulatory domain updated:
[   18.935868] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.935871] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.935874] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.935877] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.935880] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.935882] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.943640] e100 0000:0a:08.0: PME# disabled
[   18.948115] e100 0000:0a:08.0: eth0: addr 0xd2005000, irq 20, MAC addr 00:13:a9:84:33:75
[   18.948161] yenta_cardbus 0000:0a:03.0: CardBus bridge found [104d:81ef]
[   18.948182] yenta_cardbus 0000:0a:03.0: Enabling burst memory read transactions
[   18.948188] yenta_cardbus 0000:0a:03.0: Using CSCINT to route CSC interrupts to PCI
[   18.948190] yenta_cardbus 0000:0a:03.0: Routing CardBus interrupts to PCI
[   18.948199] yenta_cardbus 0000:0a:03.0: TI: mfunc 0x01131b22, devctl 0x64
[   18.986067] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   18.986072] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   18.986227] iwl3945 0000:06:00.0: irq 46 for MSI/MSI-X
[   18.986412] Registered led device: phy0-led
[   18.996797] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   19.027643] ifup[673]: Service network not started and mode 'auto' -> skipping
[   19.049728] ifup[683]: Service network not started and mode 'auto' -> skipping
[   19.065045] r5u870-0: registered as video0
[   19.065091] usbcore: registered new interface driver r5u870
[   19.171870] yenta_cardbus 0000:0a:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   19.171875] yenta_cardbus 0000:0a:03.0: Socket status: 30000006
[   19.171880] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[   19.171892] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[   19.171896] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge window: [mem 0xd2000000-0xd20fffff]
[   19.171900] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2000000-0xd20fffff: excluding 0xd2000000-0xd200ffff
[   19.171917] yenta_cardbus 0000:0a:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   19.171920] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[   19.172546] firewire_ohci 0000:0a:03.1: enabling device (0000 -> 0002)
[   19.172559] firewire_ohci 0000:0a:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.177620] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[   19.177676] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   19.177732] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   19.223176] firewire_ohci: Added fw-ohci device 0000:0a:03.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[   19.223398] tifm_7xx1 0000:0a:03.2: enabling device (0000 -> 0002)
[   19.223409] tifm_7xx1 0000:0a:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   19.276283] **3PEI: usbcam_v4lopen(...) enter
[   19.276290] usbcam_v4l_open(..) usb_autopm_get_interface(udp->ud_intf) == -13
[   19.276293] **3PEI: /home/abuild/rpmbuild/BUILD/r5u870/obj/desktop/usbcam/usbcam_fops.c, 185 -> don't know what happend, return with error..
[   19.276308] **3PEI: usbcam_v4lopen(...) exit with -13
[   19.724239] firewire_core: created device fw0: GUID 080046030242f686, S400
[   20.291994] Adding 2103292k swap on /dev/sda1.  Priority:0 extents:1 across:2103292k 
[   20.926471] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[   21.071235] nvidia: module license 'NVIDIA' taints kernel.
[   21.071242] Disabling lock debugging due to kernel taint
[   21.167697] systemd-fsck[705]: /dev/sda3: sauber, 12726/10493952 Dateien, 2479138/41944320 Blöcke (Prüfung nach 4 Einhängevorgängen)
[   21.288378] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.288387] nvidia 0000:01:00.0: setting latency timer to 64
[   21.288393] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   21.288541] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  290.10  Wed Nov 16 17:39:29 PST 2011
[   21.299500] boot.lvm[427]: Scanning for LVM volume groups...
[   21.624498] boot.lvm[427]: No volume groups found
[   21.627590] device-mapper: uevent: version 1.0.3
[   21.627684] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[   21.628663] boot.lvm[427]: No volume groups found
[   21.641777] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   21.660627] boot.lvm[427]: Reading all physical volumes.  This may take a while...
[   21.661070] boot.lvm[427]: Activating LVM volume groups...
[   21.667069] boot.lvm[427]: No volume groups found
[   21.675544] boot.lvm[427]: ..done
[   21.887559] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48
[   21.892329] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48
[   21.898393] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   21.919885] cpufreq[741]: Loading CPUFreq modules..done
[   21.953714] microcode: CPU0 updated to revision 0xd1, date = 2010-10-01
[   21.954176] microcode: CPU1 updated to revision 0xd1, date = 2010-10-01
[   21.954700] microcode.ctl[729]: Checking/updating CPU microcode ..done
[   22.025638] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.043059] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.047764] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.309375] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   22.420959] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.439276] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.439280] Bluetooth: BNEP filters: protocol multicast
[   22.450796] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.476924] NET: Registered protocol family 17
[   22.677272] Bluetooth: RFCOMM TTY layer initialized
[   22.677278] Bluetooth: RFCOMM socket layer initialized
[   22.677280] Bluetooth: RFCOMM ver 1.11
[   24.490053] bootsplash: status on console 0 changed to on
[   34.042878] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
[   34.216407] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
[   39.909857] wlan0: authenticate with 00:24:fe:a5:9a:37 (try 1)
[   39.911859] wlan0: authenticated
[   39.915108] wlan0: associate with 00:24:fe:a5:9a:37 (try 1)
[   39.920592] wlan0: RX AssocResp from 00:24:fe:a5:9a:37 (capab=0x411 status=0 aid=1)
[   39.920599] wlan0: associated
[   39.922322] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   43.915729] wlan0: deauthenticated from 00:24:fe:a5:9a:37 (Reason: 1)
[   43.929130] cfg80211: Calling CRDA to update world regulatory domain
[   43.933084] cfg80211: World regulatory domain updated:
[   43.933088] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   43.933091] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   43.933094] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   43.933097] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   43.933099] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   43.933102] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   47.827942] wlan0: authenticate with 00:15:0c:4b:30:01 (try 1)
[   47.829976] wlan0: authenticated
[   47.833119] wlan0: associate with 00:15:0c:4b:30:01 (try 1)
[   47.841580] wlan0: RX ReassocResp from 00:15:0c:4b:30:01 (capab=0x411 status=0 aid=1)
[   47.841584] wlan0: associated
[   48.954175] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0
[   48.954179] ll header: ff:ff:ff:ff:ff:ff:00:15:0c:4b:2f:ff:08:00
[   50.882017] wlan0: no IPv6 routers present
[   68.644243] fuse init (API version 7.17)
[   68.816386] mount[1961]: mount: fusectl ist bereits eingehängt oder /sys/fs/fuse/connections wird gerade benutzt
[   68.816735] mount[1961]: mount: Laut mtab ist fusectl schon auf /sys/fs/fuse/connections eingehängt
[  340.503083] usbcore: deregistering interface driver uvcvideo
[  675.108664] ppdev: user-space parallel port driver
[  675.230454] lp: driver loaded but no devices found
[  675.267123] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[  675.377731] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[  738.098058] CE: hpet increased min_delta_ns to 20113 nsec
linux-p6tj:/home/jadwiga #

Gruß Z.

Rainer Juhser · 6 Jan. 2012

Zuzia schrieb:
mit dem "nopaste" komme ich irgendwie nicht klar:

Dann versuche bitte umgehend, das zu ändern. Vielleicht wäre es ein guter Anfang, mal genau zu erklären, wo es hakt. "Komme ich irgendwie nicht klar" hört sich für mich ein bisschen so an wie "ich habe keine Lust, mich da intensver zu engagieren". Diese Monsterpostings sind auf jeden Fall eine Zumutung!

Zuzia · 7 Jan. 2012

Mit allem Respekt, Rainer Juhser - ich habe nur das hier gepostet, was der tomm.fa wollte; ob es über einen "Zwischenplatz" wie der Server nopaste, oder hier - ein Monsterpostings wird es überall gleich bleiben.
WO es hakt kann hier auch gleich erklären: ein Dolmetscher ist aus dem Haus, ich spreche kein Englisch - die für ein Englischkurs benötigte Zeit habe ich leider nicht. Mit der Lust hat es nicht zu tun - wirklich.
Trotzdem nutze ich seit SuSE 9.1 Linux auf meinem Rechner und - manchmal recht mühselig - komme bis jetzt immer ans Ziel. Ob ich dabei die Geduld der erfahrenen Linuxusers überstrapaziere? Keiner ist gezwungen, für jede Hilfe bin ich immer sehr dankbar.
Gruß, Zuzia

tomm.fa · 7 Jan. 2012

Du hättest wenigstens die Ausgabe von hwinfo filtern können, ging doch schon mal. Habe gerade mal die interessanten Dinge aus dmesg zwischengespeichert.

[18.857113] Linux video capture interface: v2.00
[ 18.857689] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1836)
[ 18.863019] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 18.863098] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[ 18.863111] uvcvideo: Failed to initialize the device (-5).
[ 18.863158] usbcore: registered new interface driver uvcvideo
[ 18.863160] USB Video Class driver (1.1.1)
[ 18.866194] usbcam: registering driver r5u870 0.11.3
[ 18.866219] r5u870-0: Detected Sony VGP-VCC4
[19.065045] r5u870-0: registered as video0
[19.276283] **3PEI: usbcam_v4lopen(...) enter
[ 19.276290] usbcam_v4l_open(..) usb_autopm_get_interface(udp->ud_intf) == -13
[ 19.276293] **3PEI: /home/abuild/rpmbuild/BUILD/r5u870/obj/desktop/usbcam/usbcam_fops.c, 185 -> don't know what happend, return with error..
[ 340.503083] usbcore: deregistering interface driver uvcvideo

Webcam in Sony Vaio mit SuSE 12.1 [Gelöst]

Zuzia

Zuzia

tomm.fa

.Linux Club Aushilfsadministrator

Zuzia

Rainer Juhser

Moderator

tomm.fa

.Linux Club Aushilfsadministrator

Zuzia

josef-wien

tomm.fa

.Linux Club Aushilfsadministrator

Zuzia

tomm.fa

.Linux Club Aushilfsadministrator

Zuzia

Zuzia

tomm.fa

.Linux Club Aushilfsadministrator

Zuzia

Zuzia

Zuzia

Rainer Juhser

Moderator

Zuzia

tomm.fa

.Linux Club Aushilfsadministrator