Hallo,
ich habe eine Webcam geschenkt bekommen und unter Suse 12.1 läuft sie nicht obwohl siew erkannt wird und laut HW Info Treiber geladen sind:
In Yast unter HW Informationen kann man folgendes herauslesen:
Hmm und unter cheese oder Kopete ist nichts zu sehen.
Was fehlt denn da noch?
lg
Rudi
ich habe eine Webcam geschenkt bekommen und unter Suse 12.1 läuft sie nicht obwohl siew erkannt wird und laut HW Info Treiber geladen sind:
Code:
rudolf@linux-xlq7:~> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 002 Device 003: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 004: ID 04fc:2001 Sunplus Technology Co., Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubIn Yast unter HW Informationen kann man folgendes herauslesen:
Code:
----- kernel log -----
<6>[ 6.868120] hub 4-0:1.0: USB hub found
<6>[ 6.868128] hub 4-0:1.0: 2 ports detected
<6>[ 7.035008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 7.040823] input: PC Speaker as /devices/platform/pcspkr/input/input4
<6>[ 7.073900] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
<6>[ 7.073902] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
<6>[ 7.073932] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<7>[ 7.073941] e1000e 0000:00:19.0: setting latency timer to 64
<7>[ 7.074064] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
<6>[ 7.147593] Linux video capture interface: v2.00
<6>[ 7.186526] uvcvideo: Found UVC 1.00 device USB Web-CAM (04fc:2001)
<6>[ 7.201532] parport_pc 00:03: reported by Plug and Play ACPI
<6>[ 7.201560] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
<6>[ 7.229688] iTCO_vendor_support: vendor-support=0
<6>[ 7.231425] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
<6>[ 7.231490] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
<6>[ 7.231616] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<5>[ 7.238085] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 7.238147] scsi 1:0:0:0: Attached scsi generic sg1 type 5
<5>[ 7.238286] sd 4:0:0:0: Attached scsi generic sg2 type 0
<5>[ 7.238339] sd 4:0:0:1: Attached scsi generic sg3 type 0
<5>[ 7.238389] sd 4:0:0:2: Attached scsi generic sg4 type 0
<5>[ 7.238439] sd 4:0:0:3: Attached scsi generic sg5 type 0
<4>[ 7.257651] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[ 7.257654] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 7.257789] sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>[ 7.266136] input: USB Web-CAM as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
<6>[ 7.266187] usbcore: registered new interface driver uvcvideo
<6>[ 7.266190] USB Video Class driver (1.1.1)
<6>[ 7.317574] ppdev: user-space parallel port driver
<6>[ 7.379452] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:20:a1:f6
<6>[ 7.379455] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
<6>[ 7.379493] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
<6>[ 7.379540] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<13>[ 7.525242] lomoco[552]: 001.003: 046d:c505 Receiver for Cordless Elite Duo (C-BG17-DUAL) Caps: CSR
<13>[ 7.670148] ifup[610]: Service network not started and mode 'auto' -> skipping
<6>[ 7.991416] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
<7>[ 7.991478] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
<7>[ 7.991508] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
<7>[ 8.162008] ALSA patch_realtek.c:1228 SKU: Nid=0x1d sku_cfg=0x4016c629
<7>[ 8.162011] ALSA patch_realtek.c:1230 SKU: port_connectivity=0x1
<7>[ 8.162018] ALSA patch_realtek.c:1231 SKU: enable_pcbeep=0x1
<7>[ 8.162019] ALSA patch_realtek.c:1232 SKU: check_sum=0x00000006
<7>[ 8.162021] ALSA patch_realtek.c:1233 SKU: customization=0x000000c6
<7>[ 8.162023] ALSA patch_realtek.c:1234 SKU: external_amp=0x5
<7>[ 8.162024] ALSA patch_realtek.c:1235 SKU: platform_type=0x0
<7>[ 8.162026] ALSA patch_realtek.c:1236 SKU: swap=0x0
<7>[ 8.162027] ALSA patch_realtek.c:1237 SKU: override=0x1
<6>[ 8.162197] hda_codec: ALC892: BIOS auto-probing.
<7>[ 8.162201] ALSA hda_codec.c:4895 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
<7>[ 8.162203] ALSA hda_codec.c:4899 speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
<7>[ 8.162205] ALSA hda_codec.c:4903 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<7>[ 8.162207] ALSA hda_codec.c:4904 mono: mono_out=0x0
<7>[ 8.162208] ALSA hda_codec.c:4907 dig-out=0x11/0x0
<7>[ 8.162210] ALSA hda_codec.c:4908 inputs:
<7>[ 8.162212] ALSA hda_codec.c:4912 Rear Mic=0x18
<7>[ 8.162213] ALSA hda_codec.c:4912 Front Mic=0x19
<7>[ 8.162215] ALSA hda_codec.c:4912 Line=0x1a
<7>[ 8.162216] ALSA hda_codec.c:4914
<7>[ 8.164465] ALSA patch_realtek.c:1291 realtek: No valid SSID, checking pincfg 0x4016c629 for NID 0x1d
<7>[ 8.164467] ALSA patch_realtek.c:1307 realtek: Enabling init ASM_ID=0xc629 CODEC_ID=10ec0892
<6>[ 8.167749] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
<30>[ 10.974257] systemd-fsck[659]: /dev/sda3: sauber, 47898/32832000 Dateien, 6497562/131072000 Blöcke
<6>[ 11.101284] Adding 2103292k swap on /dev/sda1. Priority:0 extents:1 across:2103292k
<6>[ 11.681652] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
<30>[ 11.714132] systemd-fsck[670]: /dev/sda4: sauber, 4002/26845184 Dateien, 4001444/107348736 Blöcke
<6>[ 12.194980] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr
<30>[ 12.696262] cpufreq[693]: Loading CPUFreq modules..done
<6>[ 12.798425] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
<6>[ 12.809398] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
<6>[ 12.810705] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>[ 12.837253] microcode: CPU0 updated to revision 0x1b, date = 2011-07-14
<6>[ 12.837633] microcode: CPU1 updated to revision 0x1b, date = 2011-07-14
<30>[ 12.837981] microcode.ctl[691]: Checking/updating CPU microcode ..done
<6>[ 13.134914] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 13.139446] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 13.141236] ip_tables: (C) 2000-2006 Netfilter Core Team
<7>[ 14.691892] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
<7>[ 14.742734] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
<6>[ 14.742899] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 16.332574] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
<6>[ 16.332578] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
<6>[ 16.332708] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[ 16.360343] NET: Registered protocol family 17
<6>[ 21.571819] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
<6>[ 21.698666] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
<6>[ 21.700705] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0
<7>[ 26.613315] eth0: no IPv6 routers present
<3>[ 81.782863] uvcvideo: Failed to submit URB 0 (-28).
<6>[ 90.280676] fuse init (API version 7.17)
<3>[ 92.013899] uvcvideo: Failed to submit URB 0 (-28).
<3>[ 334.014166] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
<3>[ 334.080844] uvcvideo: Failed to submit URB 0 (-28).
<3>[ 345.252577] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
<3>[ 345.551652] uvcvideo: Failed to query (SET_CUR) UVC control 8 on unit 2: -110 (exp. 2).
<3>[ 347.240825] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
<3>[ 347.539893] uvcvideo: Failed to query (SET_CUR) UVC control 8 on unit 2: -110 (exp. 2).
<6>[ 746.869633] st: Version 20101219, fixed bufsize 32768, s/g segs 256
<6>[ 757.336101] parport_pc 00:03: disabled
<6>[ 757.346502] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
<6>[ 757.346509] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
<6>[ 757.346511] parport 0x378: You gave this address, but there is probably no parallel port there!
<6>[ 757.346541] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
<6>[ 757.447151] parport_pc 00:03: activated
<6>[ 757.447154] parport_pc 00:03: reported by Plug and Play ACPI
<6>[ 757.447185] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
<6>[ 757.546991] lp0: using parport0 (interrupt-driven).
<6>[ 761.961998] parport_pc 00:03: disabled
<6>[ 761.975602] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
<6>[ 761.975609] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
<6>[ 761.975610] parport 0x378: You gave this address, but there is probably no parallel port there!
<6>[ 761.975815] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
<6>[ 762.087489] ppa: Version 2.07 (for Linux 2.4.x)
----- kernel log end -----Hmm und unter cheese oder Kopete ist nichts zu sehen.
Was fehlt denn da noch?
lg
Rudi
