Hallo,
nachfolgendes Ergebnis: Suse Linux 9.1 & WLAN PCMCIA-Karte Netgear WG511
linux:/home/FW # rcnetwork restart
Shutting down network interfaces:
eth0 device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Cont roller (rev 41)
eth0 configuration: eth-id-00:d0:59:33:c5:06 done
eth1 device: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
eth1 configuration: wlan-bus-pcmcia done
Shutting down service network . . . . . . . . . . . . . done.
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
eth0 device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Cont roller (rev 41)
eth0 configuration: eth-id-00:d0:59:33:c5:06
eth0 (DHCP) . IP/Netmask: 192.168.2.110 / 255.255.255.0 done
eth1 device: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
eth1 configuration: wlan-bus-pcmcia
eth1 (DHCP) . . . . . no IP address yet... backgrounding. waiting
Setting up service network . . . . . . . . . . . . . . done.
linux:/home/FW # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
eth1 IEEE 802.11b/g Nickname:"linux"
Mode:Managed Channel:6 Access Point: 00:00:00:00:00:00
Bit Rate:0kb/s Tx-Power=31 dBm Sensitivity=20/200
Retry min limit:8 RTS thr:2347 B Fragment thr:2346 B
Encryption key:6162-6364-6566-6768-696A-6B6C-6D Security mode:restricted
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
linux:/home/FW # cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "Intersil", "ISL3890", "-", "-"
manfid: 0x000b, 0x3890
function: 254 ((null))
linux:/home/FW #
Danke
nachfolgendes Ergebnis: Suse Linux 9.1 & WLAN PCMCIA-Karte Netgear WG511
linux:/home/FW # rcnetwork restart
Shutting down network interfaces:
eth0 device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Cont roller (rev 41)
eth0 configuration: eth-id-00:d0:59:33:c5:06 done
eth1 device: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
eth1 configuration: wlan-bus-pcmcia done
Shutting down service network . . . . . . . . . . . . . done.
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
eth0 device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Cont roller (rev 41)
eth0 configuration: eth-id-00:d0:59:33:c5:06
eth0 (DHCP) . IP/Netmask: 192.168.2.110 / 255.255.255.0 done
eth1 device: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
eth1 configuration: wlan-bus-pcmcia
eth1 (DHCP) . . . . . no IP address yet... backgrounding. waiting
Setting up service network . . . . . . . . . . . . . . done.
linux:/home/FW # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
eth1 IEEE 802.11b/g Nickname:"linux"
Mode:Managed Channel:6 Access Point: 00:00:00:00:00:00
Bit Rate:0kb/s Tx-Power=31 dBm Sensitivity=20/200
Retry min limit:8 RTS thr:2347 B Fragment thr:2346 B
Encryption key:6162-6364-6566-6768-696A-6B6C-6D Security mode:restricted
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
linux:/home/FW # cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "Intersil", "ISL3890", "-", "-"
manfid: 0x000b, 0x3890
function: 254 ((null))
linux:/home/FW #
Danke