journalctl -f
Apr 26 23:17:15 localhost.localdomain (udev-worker)[7442]: 1-3: Process '/usr/lib/virtualbox/VBoxCreateUSBNode.sh 189 3 00' failed with exit code 1.
Apr 26 23:17:16 localhost.localdomain mtp-probe[7498]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:17:16 localhost.localdomain mtp-probe[7498]: bus: 1, device: 4 was not an MTP device
Apr 26 23:17:16 localhost.localdomain systemd-logind[1355]: Watching system buttons on /dev/input/event17 (Hauppauge WinTV USB 2)
Apr 26 23:18:14 localhost.localdomain kernel: usb 1-3: USB disconnect, device number 4
Apr 26 23:18:14 localhost.localdomain kernel: em28xx 1-3:1.0: Disconnecting em28xx
Apr 26 23:18:14 localhost.localdomain kernel: em28xx 1-3:1.0: Closing input extension
Apr 26 23:18:15 localhost.localdomain kernel: em28xx 1-3:1.0: Freeing device
Apr 26 23:18:46 localhost.localdomain su[7634]: (to root) Benutzer on pts/0
Apr 26 23:18:46 localhost.localdomain su[7634]: pam_unix(su:session): session opened for user root by (uid=1000)
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: new high-speed USB device number 5 using ehci-pci
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: New USB device found, idVendor=2040, idProduct=8268, bcdDevice= 1.00
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: Product: soloHD
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: Manufacturer: HCW
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: SerialNumber: 0014152420
Apr 26 23:19:08 localhost.localdomain kernel: em28xx 1-3:1.0: New device HCW soloHD @ 480 Mbps (2040:8268, interface 0, class 0)
Apr 26 23:19:08 localhost.localdomain kernel: em28xx 1-3:1.0: DVB interface 0 found: bulk
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: chip ID is em28178
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x7ac8cd80
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: EEPROM info:
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: microcode start address = 0x0004, boot configuration = 0x01
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: AC97 audio (5 sample rates)
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: 500mA max power
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Identified as Hauppauge WinTV USB 2 (card=4)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: Hauppauge model 203129, rev D4I6, serial# 14152420
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: audio processor is None (idx 0)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: has no radio, has IR receiver, has no IR transmitter
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: dvb set to bulk mode.
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Registering input extension
Apr 26 23:19:09 localhost.localdomain kernel: Registered IR keymap rc-hauppauge
Apr 26 23:19:09 localhost.localdomain kernel: rc rc0: Hauppauge WinTV USB 2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/rc/rc0
Apr 26 23:19:09 localhost.localdomain kernel: rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
Apr 26 23:19:09 localhost.localdomain kernel: input: Hauppauge WinTV USB 2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/rc/rc0/input22
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Input extension successfully initialized
Apr 26 23:19:09 localhost.localdomain mtp-probe[7685]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:19:09 localhost.localdomain mtp-probe[7685]: bus: 1, device: 5 was not an MTP device
Apr 26 23:19:09 localhost.localdomain (udev-worker)[7682]: 1-3: Process '/usr/lib/virtualbox/VBoxCreateUSBNode.sh 189 4 00' failed with exit code 1.
Apr 26 23:19:10 localhost.localdomain mtp-probe[7740]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:19:10 localhost.localdomain mtp-probe[7740]: bus: 1, device: 5 was not an MTP device
Apr 26 23:19:10 localhost.localdomain systemd-logind[1355]: Watching system buttons on /dev/input/event17 (Hauppauge WinTV USB 2)
Apr 26 23:17:15 localhost.localdomain (udev-worker)[7442]: 1-3: Process '/usr/lib/virtualbox/VBoxCreateUSBNode.sh 189 3 00' failed with exit code 1.
Apr 26 23:17:16 localhost.localdomain mtp-probe[7498]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:17:16 localhost.localdomain mtp-probe[7498]: bus: 1, device: 4 was not an MTP device
Apr 26 23:17:16 localhost.localdomain systemd-logind[1355]: Watching system buttons on /dev/input/event17 (Hauppauge WinTV USB 2)
Apr 26 23:18:14 localhost.localdomain kernel: usb 1-3: USB disconnect, device number 4
Apr 26 23:18:14 localhost.localdomain kernel: em28xx 1-3:1.0: Disconnecting em28xx
Apr 26 23:18:14 localhost.localdomain kernel: em28xx 1-3:1.0: Closing input extension
Apr 26 23:18:15 localhost.localdomain kernel: em28xx 1-3:1.0: Freeing device
Apr 26 23:18:46 localhost.localdomain su[7634]: (to root) Benutzer on pts/0
Apr 26 23:18:46 localhost.localdomain su[7634]: pam_unix(su:session): session opened for user root by (uid=1000)
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: new high-speed USB device number 5 using ehci-pci
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: New USB device found, idVendor=2040, idProduct=8268, bcdDevice= 1.00
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: Product: soloHD
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: Manufacturer: HCW
Apr 26 23:19:08 localhost.localdomain kernel: usb 1-3: SerialNumber: 0014152420
Apr 26 23:19:08 localhost.localdomain kernel: em28xx 1-3:1.0: New device HCW soloHD @ 480 Mbps (2040:8268, interface 0, class 0)
Apr 26 23:19:08 localhost.localdomain kernel: em28xx 1-3:1.0: DVB interface 0 found: bulk
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: chip ID is em28178
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x7ac8cd80
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: EEPROM info:
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: microcode start address = 0x0004, boot configuration = 0x01
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: AC97 audio (5 sample rates)
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: 500mA max power
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Identified as Hauppauge WinTV USB 2 (card=4)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: Hauppauge model 203129, rev D4I6, serial# 14152420
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: audio processor is None (idx 0)
Apr 26 23:19:09 localhost.localdomain kernel: tveeprom: has no radio, has IR receiver, has no IR transmitter
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: dvb set to bulk mode.
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Registering input extension
Apr 26 23:19:09 localhost.localdomain kernel: Registered IR keymap rc-hauppauge
Apr 26 23:19:09 localhost.localdomain kernel: rc rc0: Hauppauge WinTV USB 2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/rc/rc0
Apr 26 23:19:09 localhost.localdomain kernel: rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
Apr 26 23:19:09 localhost.localdomain kernel: input: Hauppauge WinTV USB 2 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/rc/rc0/input22
Apr 26 23:19:09 localhost.localdomain kernel: em28xx 1-3:1.0: Input extension successfully initialized
Apr 26 23:19:09 localhost.localdomain mtp-probe[7685]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:19:09 localhost.localdomain mtp-probe[7685]: bus: 1, device: 5 was not an MTP device
Apr 26 23:19:09 localhost.localdomain (udev-worker)[7682]: 1-3: Process '/usr/lib/virtualbox/VBoxCreateUSBNode.sh 189 4 00' failed with exit code 1.
Apr 26 23:19:10 localhost.localdomain mtp-probe[7740]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
Apr 26 23:19:10 localhost.localdomain mtp-probe[7740]: bus: 1, device: 5 was not an MTP device
Apr 26 23:19:10 localhost.localdomain systemd-logind[1355]: Watching system buttons on /dev/input/event17 (Hauppauge WinTV USB 2)