- collectNWData.sh V0.6.1.8 (Rev: 1.136 Build: 2008/12/14 21:43:00)
- --- Welcher Netzwerkverbindungtyp soll getestet werden?
- --- (2) Kabellose Verbindung (WLAN)
- --- Welche Netzwerktopologie liegt vor?
- --- (2) WLAN HW router <---> LinuxClient
- --- Auf welchem Rechner wird das Script ausgeführt?
- --- (1) LinuxClient
-
- !!! CND0190W: Es scheint ein Problem mit der WLAN firmware vorzuliegen
- !!! CND0230W: IPV6 ist eingeschaltet
- !!! CND0240E: Knetworkmanager wird für die Netzwerkkonfiguration benutzt aber die Netzwerkkartenkonfiguration für wlan0,eth0 existiert
- !!! CND0360E: Eine drahtlose Verbindung wurde getestet obwohl eine kabelgebundene Verbindung am Interface eth0 existiert . Das Netzwerkkabel ausstecken und das Script noch einmal starten
- --- Netzwerkkonfigurationsinformationen werden in Datei collectNWData.txt geschrieben ...
- --- 2 Fehler gefunden
- --- 2 Warnungen gefunden
- --- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler beseitigt werden könnenF
-
- ==================================================================================================================
- ==================================================================================================================
- *** uname -a
- Linux linux-8w7t 2.6.25.5-1.1-default #1 SMP 2008-06-07 01:55:22 +0200 i686 i686 i386 GNU/Linux
- ==================================================================================================================
- *** cat /etc/*-release
- openSUSE 11.0 (i586)
- VERSION = 11.0
- ==================================================================================================================
- *** cat /etc/resolv | grep -vi "search"
- nameserver 192.168.178.1
- ==================================================================================================================
- *** cat /etc/hosts
- 127.0.0.1 localhost
- 127.0.0.2 linux-8w7t.site linux-8w7t
- 192.168.178.40 Fritz.box Fritz
- ==================================================================================================================
- *** cat /etc/HOSTNAME
- linux-8w7t.site
- ==================================================================================================================
- *** route
- Kernel IP Routentabelle
- Ziel Router Genmask Flags Metric Ref Use Iface
- 192.168.178.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
- 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
- 0.0.0.0 192.168.178.1 0.0.0.0 UG 0 0 0 eth0
- ==================================================================================================================
- *** ifconfig
- eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
- inet Adresse:192.168.178.63 Bcast:192.168.178.255 Maske:255.255.255.0
- inet6 Adresse: fe80::212:79ff:febf:a04e/64 Gültigkeitsbereich:Verbindung
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:823 errors:0 dropped:0 overruns:0 frame:0
- TX packets:849 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 Sendewarteschlangenlänge:1000
- RX bytes:635221 (620.3 Kb) TX bytes:160580 (156.8 Kb)
- Interrupt:16
- lo Link encap:Lokale Schleife
- inet Adresse:127.0.0.1 Maske:255.0.0.0
- inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:86 errors:0 dropped:0 overruns:0 frame:0
- TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 Sendewarteschlangenlänge:0
- RX bytes:5116 (4.9 Kb) TX bytes:5116 (4.9 Kb)
- ==================================================================================================================
- *** ping tests
- Ping of 195.135.220.3 OK
- Ping of www.suse.de OK
- ==================================================================================================================
- *** dhcpcd-test
- wlan0: No DHCP server detected
- ==================================================================================================================
- *** lspci
- 02:04.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
- 02:0e.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
- ==================================================================================================================
- *** lsusb
- Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 002 Device 002: ID 07ab:fccc Freecom Technologies
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- ==================================================================================================================
- *** hwinfo --netcard; # (filtered)
- 08: PCI 20e.0: 0200 Ethernet controller
- Model: "Hewlett-Packard Company NX6110/NC6120"
- Vendor: pci 0x14e4 "Broadcom"
- Device: pci 0x170c "BCM4401-B0 100Base-TX"
- SubVendor: pci 0x103c "Hewlett-Packard Company"
- SubDevice: pci 0x099c "NX6110/NC6120"
- Driver: "b44"
- Driver Modules: "ssb", "b44"
- Device File: eth0
- Link detected: yes
- Driver Status: b44 is active
- Driver Activation Cmd: "modprobe b44"
- 11: PCI 204.0: 0282 WLAN controller
- Model: "Hewlett-Packard Company Presario R3000 802.11b/g"
- Vendor: pci 0x14e4 "Broadcom"
- Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
- SubVendor: pci 0x103c "Hewlett-Packard Company"
- SubDevice: pci 0x12fa "Presario R3000 802.11b/g"
- Driver: "b43-pci-bridge"
- Driver Modules: "ssb"
- Device File: wlan0
- Driver Status: ssb is active
- Driver Activation Cmd: "modprobe ssb"
- ==================================================================================================================
- *** List of loaded modules
- | ac | ac97_bus | af_packet | agpgart |
- | arc4 | ata_piix | b43 | b44 |
- | battery | binfmt_misc | button | cdrom |
- | cfg80211 | container | crypto_blkcipher | dm_mod |
- | dock | drm | ecb | edd |
- | ehci_hcd | ext3 | fan | firmware_class |
- | fuse | i915 | ieee1394 | input_polldev |
- | intel_agp | ip6table_filter | ip6table_mangle | ip6_tables |
- | ip6t_LOG | ip6t_REJECT | iptable_filter | iptable_mangle |
- | iptable_nat | ip_tables | ipt_LOG | ipt_REJECT |
- | ipv6 | iTCO_vendor_support | iTCO_wdt | jbd |
- | joydev | led_class | libata | loop |
- | mac80211 | mbcache | microcode | mii |
- | nf_conntrack | nf_conntrack_ipv4 | nf_conntrack_ipv6 | nf_conntrack_netbios_ns |
- | nf_nat | ohci1394 | output | pcmcia |
- | pcmcia_core | processor | rfkill | rfkill_input |
- | rsrc_nonstatic | rtc_cmos | rtc_core | rtc_lib |
- | scsi_mod | sd_mod | serio_raw | sg |
- | snd | snd_ac97_codec | snd_intel8x0 | snd_intel8x0m |
- | snd_mixer_oss | snd_page_alloc | snd_pcm | snd_pcm_oss |
- | snd_seq | snd_seq_device | snd_timer | soundcore |
- | sr_mod | ssb | thermal | uhci_hcd |
- | usbcore | usb_storage | video | wmi |
- | x_tables | xt_limit | xt_pkttype | xt_state |
- | xt_tcpudp | yenta_socket |
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-[earwd]* | egrep -v ".*=''"
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-eth0
- BOOTPROTO='dhcp'
- NAME='BCM4401-B0 100Base-TX'
- STARTMODE='auto'
- USERCONTROL='no'
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-wlan0
- BOOTPROTO='dhcp'
- NAME='BCM4306 802.11b/g Wireless LAN Controller'
- STARTMODE='auto'
- USERCONTROL='yes'
- WIRELESS_AUTH_MODE='no-encryption'
- WIRELESS_BITRATE='auto'
- WIRELESS_DEFAULT_KEY='@@@@@@'
- WIRELESS_KEY_LENGTH='@@@@@@'
- WIRELESS_MODE='Managed'
- WIRELESS_POWER='yes'
- ==================================================================================================================
- *** iwconfig
- lo no wireless extensions.
- wmaster0 no wireless extensions.
- eth0 no wireless extensions.
- wlan0 IEEE 802.11g ESSID:""
- Mode:Managed Channel:0 Access Point: Not-Associated
- Tx-Power=0 dBm
- Retry min limit:7 RTS thr:off Fragment thr=2352 B
- Encryption key:off
- Link Quality:0 Signal level:0 Noise level:0
- Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
- Tx excessive retries:0 Invalid misc:0 Missed beacon:0
- ==================================================================================================================
- *** Actual date for bias of following greps
- 15:14:23 2008-12-20
- ==================================================================================================================
- *** tail -n 300 /var/log/messages* | grep -i -A 5 'firmware'
- Dec 20 14:16:26 linux-8w7t firmware.sh[2429]: Cannot find firmware file 'intel-ucode/06-0d-06'
- Dec 20 14:16:27 linux-8w7t kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Dec 20 14:16:27 linux-8w7t kernel: input: b43-phy0 as /devices/virtual/input/input7
- Dec 20 14:16:27 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 14:16:27 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- ---------------------------------------------------------------------------
- Dec 20 14:33:21 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 14:33:21 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 14:33:21 linux-8w7t firmware.sh[3254]: Cannot find firmware file 'b43/ucode5.fw'
- Dec 20 14:34:42 linux-8w7t kernel: b44: eth0: powering down PHY
- Dec 20 14:34:42 linux-8w7t avahi-daemon[2373]: Interface eth0.IPv4 no longer relevant for mDNS.
- ---------------------------------------------------------------------------
- Dec 20 14:34:50 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 14:34:50 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 14:34:50 linux-8w7t firmware.sh[4608]: Cannot find firmware file 'b43/ucode5.fw'
- Dec 20 14:34:53 linux-8w7t kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
- Dec 20 14:34:53 linux-8w7t kernel: b44: eth0: Flow control is off for TX and off for RX.
- ---------------------------------------------------------------------------
- Dec 20 15:10:16 linux-8w7t firmware.sh[2346]: Cannot find firmware file 'b43/ucode5.fw'
- Dec 20 15:10:16 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 15:10:16 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 15:10:17 linux-8w7t auditd[2384]: Started dispatcher: /sbin/audispd pid: 2386
- Dec 20 15:10:17 linux-8w7t auditd[2384]: Init complete, auditd 1.6.8 listening for events (startup state disable)
- ---------------------------------------------------------------------------
- Dec 20 15:10:21 linux-8w7t firmware.sh[2468]: Cannot find firmware file 'intel-ucode/06-0d-06'
- Dec 20 15:10:28 linux-8w7t /usr/sbin/cron[2661]: (CRON) STARTUP (V5.0)
- Dec 20 15:10:29 linux-8w7t powersaved[2686]: WARNING (CpufreqManagement:52) No capability cpufreq_control
- Dec 20 15:10:29 linux-8w7t powersaved[2686]: WARNING (CpufreqManagement:52) No capability cpufreq_control
- Dec 20 15:10:29 linux-8w7t smartd[2705]: smartd 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
- ---------------------------------------------------------------------------
- Dec 20 15:14:24 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 15:14:24 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 15:14:24 linux-8w7t firmware.sh[3608]: Cannot find firmware file 'b43/ucode5.fw'
- Dec 20 15:14:24 linux-8w7t dhcpcd[3596]: wlan0: ioctl SIOCSIFFLAGS: No such file or directory
- Dec 20 15:14:24 linux-8w7t dhcpcd[3596]: wlan0: exiting
- ---------------------------------------------------------------------------
- ==================================================================================================================
- *** grep -i radio /var/log/boot.msg | tail -n 5
- ==================================================================================================================
- *** dmesg | grep -i radio | tail -n 5
- ==================================================================================================================
- *** tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 5
- Dec 20 15:10:16 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 15:10:21 linux-8w7t firmware.sh[2468]: Cannot find firmware file 'intel-ucode/06-0d-06'
- Dec 20 15:14:24 linux-8w7t kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
- Dec 20 15:14:24 linux-8w7t kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
- Dec 20 15:14:24 linux-8w7t firmware.sh[3608]: Cannot find firmware file 'b43/ucode5.fw'
- ==================================================================================================================
- *** ls -ls /lib/firmware
- insgesamt 56
- 4 -rw-r--r-- 1 root root 137 6. Jun 2008 3CCFEM556.cis
- 4 -rw-r--r-- 1 root root 134 6. Jun 2008 3CXEM556.cis
- 4 -rw-r--r-- 1 root root 109 6. Jun 2008 COMpad2.cis
- 4 -rw-r--r-- 1 root root 76 6. Jun 2008 COMpad4.cis
- 4 -rw-r--r-- 1 root root 136 6. Jun 2008 DP83903.cis
- 4 -rw-r--r-- 1 root root 53 6. Jun 2008 E-CARD.cis
- 4 -rw-r--r-- 1 root root 253 6. Jun 2008 LA-PCM.cis
- 4 -rw-r--r-- 1 root root 107 6. Jun 2008 MT5634ZLX.cis
- 4 -rw-r--r-- 1 root root 54 6. Jun 2008 NE2K.cis
- 4 -rw-r--r-- 1 root root 210 6. Jun 2008 PCMLM28.cis
- 4 -rw-r--r-- 1 root root 68 6. Jun 2008 PE-200.cis
- 4 -rw-r--r-- 1 root root 74 6. Jun 2008 PE520.cis
- 4 -rw-r--r-- 1 root root 86 6. Jun 2008 RS-COM-2P.cis
- 4 -rw-r--r-- 1 root root 85 6. Jun 2008 tamarack.cis
- ==================================================================================================================
- *** ndiswrapper -l
- No ndiswrapper module loaded
- ==================================================================================================================
- *** Active processes
- wpa_supplicant:YES knetworkmanager:YES nm-applet:NO
- ==================================================================================================================
- *** grep NETWORKMANAGER /etc/sysconfig/network/config
- NETWORKMANAGER="yes"
- ==================================================================================================================
- *** grep -i persistent /etc/sysconfig/network/config
- ==================================================================================================================
- *** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/70-persistent-net
- /usr/bin/egrep: /etc/udev/rules.d/*net_persistent*: Datei oder Verzeichnis nicht gefunden
- /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
- /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
- ==================================================================================================================
- *** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
- /etc/modprobe.conf:install eth0 /bin/true
- /etc/modprobe.conf:install eth1 /bin/true
- ==================================================================================================================
- *** iwlist scanning
- wlan0 Interface doesn't support scanning : Network is down
-
- ==================================================================================================================
- *** NWEliza states
- IF:eth0 IM:1
- IF:wlan0 IM:2
- DI:2 dI:1 NIC:1 cNiC:2:1 NI:2 cNI:2 DHCP:0 NDIS:0 NIWL:1 IP6:1 KM:1 PNG:0 WLW:eth0 1 AP:1
-