Hab gestern abend noch debian auf meinem Laptop installiert und eigentlich tut alles soweit, nur halt mein WLAN noch ned. Mittlerweile hab ich es geschafft, dass die Karte blinkt, da ich mich an die HowTos wechle hier verlinkt sind gehalten hab. Also denk ich mal sie tut und hat empfang.
Mein Vorgehen.
Hab mir die Atmel Firmeware für Debian besorgt (atmel-firmware_1.2-2_all.deb) und mit dpkg -i atmel-firmware_1.2-2_all.deb installiert. Dann hab ich erstmal eine weil nixmehr hingekriegt ^^, wie es halt so ist. Irgendwann hab ich dann wo gelesen, dass ich mit modprobe das module laden muss und es bei /etc/modules eintragen kann. Hab ich gemacht. modprobe atmel_cs und in /etc/modules nen eintrag mit atmel_cs.
Das hat dazu geführt, dass die Karte blinkt.
So jetzt weiß ich aber nicht weiter was tun. Hab gelesen ich muss in die /etc/network/interfaces einen eintrag der Art
"# The first network card - this entry was created during the Debian
# installation (network, broadcast and gateway are optional)
iface eth0 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255"
hinzufügen. Hab ich auch gemacht, nur halt eth1 und dhcp anstatt static.
Am besten poste ich mal meine /etc/modules und meine /etc/network/interfaces
/etc/modules:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
ide-cd
ide-detect
atmel_cs
/etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
# The secondary network interface
auto eth1
iface eth1 inet dhcp
netmask 255.255.255.0
network 192.168.1.254
broadcast 192.168.1.254
Hoffe mir kann einer helfen, was ich noch machen muss, bzw was ich falsch gemacht hab. Würde es auch gerne abstellen, dass mein eth0 (onboard netzwerk) schon beim hochfahren nach einem DHCP Server sucht, sondern ich das Manuell machen kann. Viel lieber wäre es mir wenn mein eth1 (Wlan) beim starten schon zu einem dhcp server connected.
Hier noch die Meldungen für ifub:
ifup eth0:
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth0/00:50:eb:0f:7a:45
Sending on LPF/eth0/00:50:eb:0f:7a:45
Sending on Socket/fallback/fallback-net
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.254
bound to 192.168.1.101 -- renewal in 432000 seconds.
ifup eth1:
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth1/00:06:f4:02:e3:69
Sending on LPF/eth1/00:06:f4:02:e3:69
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
No DHCPOFFERS received.
No working leases in persistent database.
Exiting.
Failed to bring up eth1.
Mein Vorgehen.
Hab mir die Atmel Firmeware für Debian besorgt (atmel-firmware_1.2-2_all.deb) und mit dpkg -i atmel-firmware_1.2-2_all.deb installiert. Dann hab ich erstmal eine weil nixmehr hingekriegt ^^, wie es halt so ist. Irgendwann hab ich dann wo gelesen, dass ich mit modprobe das module laden muss und es bei /etc/modules eintragen kann. Hab ich gemacht. modprobe atmel_cs und in /etc/modules nen eintrag mit atmel_cs.
Das hat dazu geführt, dass die Karte blinkt.
So jetzt weiß ich aber nicht weiter was tun. Hab gelesen ich muss in die /etc/network/interfaces einen eintrag der Art
"# The first network card - this entry was created during the Debian
# installation (network, broadcast and gateway are optional)
iface eth0 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255"
hinzufügen. Hab ich auch gemacht, nur halt eth1 und dhcp anstatt static.
Am besten poste ich mal meine /etc/modules und meine /etc/network/interfaces
/etc/modules:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
ide-cd
ide-detect
atmel_cs
/etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
# The secondary network interface
auto eth1
iface eth1 inet dhcp
netmask 255.255.255.0
network 192.168.1.254
broadcast 192.168.1.254
Hoffe mir kann einer helfen, was ich noch machen muss, bzw was ich falsch gemacht hab. Würde es auch gerne abstellen, dass mein eth0 (onboard netzwerk) schon beim hochfahren nach einem DHCP Server sucht, sondern ich das Manuell machen kann. Viel lieber wäre es mir wenn mein eth1 (Wlan) beim starten schon zu einem dhcp server connected.
Hier noch die Meldungen für ifub:
ifup eth0:
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth0/00:50:eb:0f:7a:45
Sending on LPF/eth0/00:50:eb:0f:7a:45
Sending on Socket/fallback/fallback-net
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.254
bound to 192.168.1.101 -- renewal in 432000 seconds.
ifup eth1:
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth1/00:06:f4:02:e3:69
Sending on LPF/eth1/00:06:f4:02:e3:69
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
No DHCPOFFERS received.
No working leases in persistent database.
Exiting.
Failed to bring up eth1.