[workaround/halb ungelöst] Yast soundconfig hängt sich auf

heizer · 26 Apr. 2014

Hallo Liste,

hoffe ich habe das richtige Board erwischt?!

Betrübssystem:
openSuSE 13.1 64 Bit (Neuinstallation)

Hardware (kurz):
HP xw4400 Workstation (RB390UA 16.8 x 45.6 x 45.0 cm)
Intel Core Duo 6600 (©®™) 2.4 GHz, 4GB RAM (4x1GB), 2 FP 250 GB (System, Temp, div.) + 500 GB (home), Nvidia Quadro NVS 300 2 NIC einer Onboard ([Wald und Wiesen] RT8139) + PCI Karte (Broadcom)

Hardware (lang):

Code:

cpu:
                       Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, 2400 MHz
                       Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, 2400 MHz
keyboard:
  /dev/input/event0    AT Translated Set 2 keyboard
mouse:
  /dev/input/mice      ImPS/2 Generic Wheel Mouse
graphics card:
                       nVidia VGA compatible controller
sound:
                       Intel 82801G (ICH7 Family) High Definition Audio Controller
                       nVidia Audio device
storage:
                       Floppy disk controller
                       Intel 82801G (ICH7 Family) IDE Controller
                       Intel 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
network:
  enp5s10              CIS RT8139
  enp63s0              Broadcom NetXtreme BCM5755 Gigabit Ethernet PCI Express
network interface:
  enp63s0              Ethernet network interface
  enp5s10              Ethernet network interface
  lo                   Loopback network interface
disk:
  /dev/fd0             Disk
  /dev/sda             ST3250620AS
  /dev/sdb             Hitachi HDS72105
partition:
  /dev/sda1            Partition
  /dev/sda5            Partition
  /dev/sda6            Partition
  /dev/sda7            Partition
  /dev/sdb1            Partition
  /dev/sdb5            Partition
cdrom:
  /dev/sr0             HL-DT-ST DVDRAM GSA-4167B
floppy:
  /dev/fd0             Floppy Disk
usb controller:
                       Intel 82801G (ICH7 Family) USB UHCI Controller #1
                       Intel 82801G (ICH7 Family) USB UHCI Controller #2
                       Intel 82801G (ICH7 Family) USB UHCI Controller #3
                       Intel 82801G (ICH7 Family) USB UHCI Controller #4
                       Intel 82801G (ICH7 Family) USB2 EHCI Controller
bios:
                       BIOS
bridge:
                       Intel 82975X Memory Controller Hub
                       Intel 82975X PCI Express Root Port
                       Intel 82801G (ICH7 Family) PCI Express Port 1
                       Intel 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5
                       Intel 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6
                       Intel 82801 PCI Bridge
                       Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge
hub:
                       Linux 3.11.10-7-desktop uhci_hcd UHCI Host Controller
                       Linux 3.11.10-7-desktop uhci_hcd UHCI Host Controller
                       Linux 3.11.10-7-desktop uhci_hcd UHCI Host Controller
                       Linux 3.11.10-7-desktop ehci_hcd EHCI Host Controller
                       Linux 3.11.10-7-desktop uhci_hcd UHCI Host Controller
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Timer
                       Keyboard controller
  /dev/lp0             Parallel controller
                       Serial controller

Mein Problem:
Yast/Yast2 hängt sich bei der Soundkartenkonfiguration auf, egal welcher Weg (quick, Normal..., Advanced...) und somit bleibt mir jeglicher Sound verwehrt.

Anmerkung:
Der Sound hat schon mal funktioniert mit einem openSuSE 12.2 32 Bit PAE-Kernel

Was ich bisher versucht hab':
Informationen auf dem System über die Soundkarte zu sammeln...

Code:

'cat /proc/asound/version'
Advanced Linux Sound Architecture Driver Version k3.11.10-7-desktop

Code:

cat /proc/asound/modules

keine ausgabe...
(kann ja auch nicht, Yast klemmt bei der Konfig)

Code:

cat /proc/asound/cards
--- no soundcards ---

(kann ja auch nicht, Yast klemmt bei der Konfig)

Code:

lsmod |grep snd
snd_hda_intel          71063  1
snd_hda_codec         205080  1 snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               110211  2 snd_hda_intel,snd_hda_codec
snd_timer              29423  1 snd_pcm
snd                    87417  5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore              15047  1 snd
snd_page_alloc         18710  2 snd_hda_intel,snd_pcm

Code:

yast2 sound summary

* 82801G (ICH7 Family) High Definition Audio Controller
* Not configured yet.

* nVidia Corporation
* Not configured yet

Code:

cat /proc/interrupts
           CPU0       CPU1       
  0:        126          0   IO-APIC-edge      timer
  1:      28310          0   IO-APIC-edge      i8042
  6:          6          0   IO-APIC-edge      floppy
  7:          1          0   IO-APIC-edge      parport0
  8:          1          0   IO-APIC-edge      rtc0
  9:          0          0   IO-APIC-fasteoi   acpi
 12:    1013319          0   IO-APIC-edge      i8042
 14:      25213          0   IO-APIC-edge      ata_piix
 15:          0          0   IO-APIC-edge      ata_piix
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3
 19:     546561          0   IO-APIC-fasteoi   ata_piix
 20:          0          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 21:      11992          0   IO-APIC-fasteoi   uhci_hcd:usb4, enp5s10
 22:          0          0   IO-APIC-fasteoi   uhci_hcd:usb5
 44:     200723          0   PCI-MSI-edge      enp63s0
 45:      64736          0   PCI-MSI-edge      nvidia
NMI:      15729      16669   Non-maskable interrupts
LOC:   17134847   17127813   Local timer interrupts
SPU:          0          0   Spurious interrupts
PMI:      15729      16669   Performance monitoring interrupts
IWI:     379282     494508   IRQ work interrupts
RTR:          0          0   APIC ICR read retries
RES:    5993745    6335402   Rescheduling interrupts
CAL:       6514       9057   Function call interrupts
TLB:      51564      64272   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
MCE:          0          0   Machine check exceptions
MCP:         86         86   Machine check polls
ERR:          0
MIS:          0

Code:

grep yast2-sound /var/log/zypper.log

keine ausgabe...
(kann ja auch nicht, Yast klemmt bei der Konfig)

Code:

tail -f /var/log/zypper.log
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] ZYppFactory.cc(_closeLockFile):184 Close lockfile /var/run/zypp.pid
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypper] Zypper.cc(~Zypper):86 Zypper instance destroyed. Bye!
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] PathInfo.cc(recursive_rmdir):430 recursive_rmdir /var/tmp/TmpDir.kuNg88 
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/tmp/TmpDir.kuNg88{d 0700 0/0}
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] RpmDb.cc(closeDatabase):734 Calling closeDatabase: RpmDb[V4(X-m)V3(---): '(/)/var/lib/rpm']
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] librpmDb.cc(blockAccess):328 Block access
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] RpmDb.cc(closeDatabase):765 closeDatabase: RpmDb[NO_INIT]
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] TargetImpl.cc(~TargetImpl):815 Targets closed
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] RpmDb.cc(~RpmDb):268 ~RpmDb()
2014-04-26 20:02:12 <1> ruebezahl(31578) [zypp] RpmDb.cc(~RpmDb):271 ~RpmDb() end

Keine Ahnung was und ob es etwas zu sagen hat :???:

unter "/etc/modprobe.d/" gibt es die Datei "50-alsa.conf" darin steht:

Code:

install snd /sbin/install-snd-module snd $CMDLINE_OPTS
install snd-pcm /sbin/install-snd-module snd-pcm $CMDLINE_OPTS
install snd-seq /sbin/install-snd-module snd-seq $CMDLINE_OPTS

Keine Ahnung was und ob es etwas zu sagen hat :???:

K-Mix Anzeige: Dummy-Ausgabe

eventuell interessante Beobachtung:
nach Start des Yast Soundconfig Tools steigt die Systemlast (CPU) von systemd auf über 95% auf einer CPU und selbst nach über einer Stunde Wartezeit kommt Yast nicht zu potte und muss mit kill beendet werden...
Systemd verbleibt danach bis zu einem Systemneustart bei 93% - 97% CPU Last.

Heinz-Peter · 26 Apr. 2014

Vielleicht noch die Ausgabe von

Code:

hwinfo --sound

hilft bei der Suche?

heizer · 28 Apr. 2014

Heinz-Peter schrieb:
Vielleicht noch die Ausgabe von

Code:

hwinfo --sound

hilft bei der Suche?

Hallo Heinz-Peter,

danke für deine Bemühungen, die Daten stehen in meinem ersten Beitrag unter "Hardware (lang):" die Ausgabe entstand mit dem Kommando

Code:

hwinfo --short

aber falls es nötig ist poste ich es nochmal hier.

Gruß Micha (heizer)
edit:

sorry, hab's falsch verstanden... hier die Ausgabe des Kommandos

Code:

> hwinfo --sound
12: PCI 1b.0: 0403 Audio device                                 
  [Created at pci.319]
  Unique ID: u1Nb.fGuMkV_Y2fA
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x280c 
  Revision: 0x01
  Memory Range: 0xfe500000-0xfe503fff (rw,non-prefetchable)
  IRQ: 10 (no events)
  Module Alias: "pci:v00008086d000027D8sv0000103Csd0000280Cbc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

26: PCI 100.1: 0403 Audio device
  [Created at pci.319]
  Unique ID: NXNs.ukALa87MFX5
  Parent ID: vSkL.sBCJa6uSmM6
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1
  SysFS BusID: 0000:01:00.1
  Hardware Class: sound
  Model: "nVidia Audio device"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0be3 
  SubVendor: pci 0x10de "nVidia Corporation"
  SubDevice: pci 0x0862 
  Revision: 0xa1
  Memory Range: 0xf6d00000-0xf6d03fff (rw,non-prefetchable)
  IRQ: 10 (no events)
  Module Alias: "pci:v000010DEd00000BE3sv000010DEsd00000862bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #11 (PCI bridge)

josef-wien · 28 Apr. 2014

heizer schrieb:
die Daten stehen in meinem ersten Beitrag

Das tun sie nicht!

heizer · 4 Mai 2014

josef-wien schrieb:
heizer schrieb:

die Daten stehen in meinem ersten Beitrag

Zum Vergrößern anklicken....

Das tun sie nicht!

Sorry noch mal, habe den Befehl so eingegeben und das Ergebnis an meinen Vorbeitrag mit angebracht, siehe Edit.

Weiterhin hab' Ich mal mittels

Code:

strace yast2 sound
execve("/sbin/yast2", ["yast2", "sound"], [/* 111 vars */]) = 0
brk(0)                                  = 0x1f74000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbedb000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/lib64/bash/4.2/tls/x86_64/libreadline.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib64/bash/4.2/tls/x86_64", 0x7fffd2c1e700) = -1 ENOENT (No such file or directory)
open("/lib64/bash/4.2/tls/libreadline.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib64/bash/4.2/tls", 0x7fffd2c1e700) = -1 ENOENT (No such file or directory)
open("/lib64/bash/4.2/x86_64/libreadline.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib64/bash/4.2/x86_64", 0x7fffd2c1e700) = -1 ENOENT (No such file or directory)
open("/lib64/bash/4.2/libreadline.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib64/bash/4.2", 0x7fffd2c1e700) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=190114, ...}) = 0
mmap(NULL, 190114, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbeac000
close(3)                                = 0
open("/lib64/libreadline.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000s\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=288272, ...}) = 0
mmap(NULL, 2388872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f3bbba75000
mprotect(0x7f3bbbab3000, 2097152, PROT_NONE) = 0
mmap(0x7f3bbbcb3000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3e000) = 0x7f3bbbcb3000
mmap(0x7f3bbbcbb000, 5000, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbcbb000
close(3)                                = 0
open("/lib64/libtinfo.so.5", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \r\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=209552, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbeab000
mmap(NULL, 2306656, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f3bbb841000
mprotect(0x7f3bbb86c000, 2093056, PROT_NONE) = 0
mmap(0x7f3bbba6b000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7f3bbba6b000
mmap(0x7f3bbba74000, 608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f3bbba74000
close(3)                                = 0
open("/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=18904, ...}) = 0
mmap(NULL, 2109712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f3bbb63d000
mprotect(0x7f3bbb640000, 2093056, PROT_NONE) = 0
mmap(0x7f3bbb83f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f3bbb83f000
close(3)                                = 0
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360\34\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2008128, ...}) = 0
mmap(NULL, 3861056, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f3bbb28e000
mprotect(0x7f3bbb433000, 2097152, PROT_NONE) = 0
mmap(0x7f3bbb633000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a5000) = 0x7f3bbb633000
mmap(0x7f3bbb639000, 14912, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f3bbb639000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbeaa000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbea9000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbea8000
arch_prctl(ARCH_SET_FS, 0x7f3bbbea9700) = 0
mprotect(0x7f3bbb633000, 16384, PROT_READ) = 0
mprotect(0x7f3bbb83f000, 4096, PROT_READ) = 0
mprotect(0x7f3bbba6b000, 16384, PROT_READ) = 0
mprotect(0x7f3bbbcb3000, 8192, PROT_READ) = 0
mprotect(0x69b000, 4096, PROT_READ)     = 0
mprotect(0x7f3bbbedc000, 4096, PROT_READ) = 0
munmap(0x7f3bbbeac000, 190114)          = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
open("/dev/tty", O_RDWR|O_NONBLOCK)     = 3
close(3)                                = 0
stat("/usr/lib/locale/locale-archive", 0x7fffd2c1ed40) = -1 ENOENT (No such file or directory)
brk(0)                                  = 0x1f74000
brk(0x1f95000)                          = 0x1f95000
open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=2434, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbeda000
read(3, "# Locale name alias data base.\n#"..., 4096) = 2434
read(3, "", 4096)                       = 0
close(3)                                = 0
munmap(0x7f3bbbeda000, 4096)            = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=353, ...}) = 0
mmap(NULL, 353, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbeda000
close(3)                                = 0
open("/usr/lib64/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=26244, ...}) = 0
mmap(NULL, 26244, PROT_READ, MAP_SHARED, 3, 0) = 0x7f3bbbed3000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=23, ...}) = 0
mmap(NULL, 23, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbed2000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=56, ...}) = 0
mmap(NULL, 56, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbed1000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=155, ...}) = 0
mmap(NULL, 155, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbed0000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_NAME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_NAME", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=83, ...}) = 0
mmap(NULL, 83, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbecf000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_PAPER", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_PAPER", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
mmap(NULL, 34, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbece000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
close(3)                                = 0
open("/usr/lib/locale/de_DE.utf8/LC_MESSAGES/SYS_LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=54, ...}) = 0
mmap(NULL, 54, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbecd000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=294, ...}) = 0
mmap(NULL, 294, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbecc000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=1243766, ...}) = 0
mmap(NULL, 1243766, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbd78000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_TIME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_TIME", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=2354, ...}) = 0
mmap(NULL, 2354, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbecb000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=54, ...}) = 0
mmap(NULL, 54, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbeca000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=256516, ...}) = 0
mmap(NULL, 256516, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3bbbd39000
close(3)                                = 0
getuid()                                = 0
getgid()                                = 0
geteuid()                               = 0
getegid()                               = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
open("/proc/meminfo", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbec9000
read(3, "MemTotal:        4054796 kB\nMemF"..., 1024) = 1024
close(3)                                = 0
munmap(0x7f3bbbec9000, 4096)            = 0
rt_sigaction(SIGCHLD, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGCHLD, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigaction(SIGQUIT, {SIG_IGN, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
uname({sys="Linux", node="ruebezahl", ...}) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
stat("/home/micha", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
getpid()                                = 25892
getppid()                               = 25889
getpgrp()                               = 25889
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
getrlimit(RLIMIT_NPROC, {rlim_cur=31354, rlim_max=31354}) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
open("/sbin/yast2", O_RDONLY)           = 3
ioctl(3, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, 0x7fffd2c1ed50) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR)                   = 0
read(3, "#!/bin/bash\n\n# File:\t\t/sbin/yast"..., 80) = 80
lseek(3, 0, SEEK_SET)                   = 0
getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=4*1024}) = 0
fcntl(255, F_GETFD)                     = -1 EBADF (Bad file descriptor)
dup2(3, 255)                            = 255
close(3)                                = 0
fcntl(255, F_SETFD, FD_CLOEXEC)         = 0
fcntl(255, F_GETFL)                     = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(255, {st_mode=S_IFREG|0755, st_size=10175, ...}) = 0
lseek(255, 0, SEEK_CUR)                 = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "#!/bin/bash\n\n# File:\t\t/sbin/yast"..., 8192) = 8192
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
open("/usr/lib/YaST2/bin/yast2-funcs", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=3225, ...}) = 0
read(3, "# File:\t\t/usr/share/YaST2/bin/ya"..., 3225) = 3225
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -6994, SEEK_CUR)             = 1198
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25893
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, "1\n", 128)                     = 2
read(3, "", 128)                        = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25893, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG, NULL) = 25893
wait4(-1, 0x7fffd2c1e1c0, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "test -z `ls /sys |head -n1` && e"..., 8192) = 8192
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -8103, SEEK_CUR)             = 1287
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25896
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, "block\n", 128)                 = 6
read(3, "", 128)                        = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25896, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG, NULL) = 25896
wait4(-1, 0x7fffd2c1e1c0, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "test -z `ls /dev |head -n1` && e"..., 8192) = 8192
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -8103, SEEK_CUR)             = 1376
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25899
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, "autofs\n", 128)                = 7
read(3, "", 128)                        = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25899, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG, NULL) = 25899
wait4(-1, 0x7fffd2c1e1c0, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "if test $mount_ok -eq 0 ; then\n "..., 8192) = 8192
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
brk(0x1fb6000)                          = 0x1fb6000
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -4532, SEEK_CUR)             = 5036
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25902
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, " -- 'sound'\n", 128)           = 12
read(3, "", 128)                        = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 25902
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25902, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0x7fffd2c1e280, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "\nif [ $? != 0 ] ; then echo \"Exi"..., 8192) = 5139
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -3329, SEEK_CUR)             = 6846
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25903
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, "yast2\n", 128)                 = 6
read(3, "", 128)                        = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 25903
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25903, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0x7fffd2c1e2c0, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "\nif [ \"$UID\" = 0 ]; then\n    ech"..., 8192) = 3329
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
open("/var/run/yast.pid", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 3
fcntl(1, F_GETFD)                       = 0
fcntl(1, F_DUPFD, 10)                   = 10
fcntl(1, F_GETFD)                       = 0
fcntl(10, F_SETFD, FD_CLOEXEC)          = 0
dup2(3, 1)                              = 1
close(3)                                = 0
fstat(1, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3bbbec9000
write(1, "25892\n", 6)                  = 6
dup2(10, 1)                             = 1
fcntl(10, F_GETFD)                      = 0x1 (flags FD_CLOEXEC)
close(10)                               = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "/etc/sysconfig/language", R_OK) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
stat("/etc/sysconfig/yast2", {st_mode=S_IFREG|0644, st_size=3726, ...}) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
open("/etc/sysconfig/yast2", O_RDONLY)  = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=3726, ...}) = 0
read(3, "# Tweakable settings for the 'ya"..., 3726) = 3726
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0Sorry noch mal, habe den Befehl so eingegeben und das Ergebnis an meinen Vorbeitrag mit angebracht, siehe Edit.
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
stat("/root/.yast2/yast2", 0x7fffd2c1e990) = -1 ENOENT (No such file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [CHLD], 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [INT CHLD], 8) = 0
rt_sigprocmask(SIG_SETMASK, [INT CHLD], NULL, 8) = 0
lseek(255, -2748, SEEK_CUR)             = 7427
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25904
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(4)                                = 0
close(4)                                = -1 EBADF (Bad file descriptor)
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [CHLD], 8) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25905
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [CHLD], 8) = 0
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [CHLD], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 25904
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 1}], 0, NULL) = 25905
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(3)                                = -1 EBADF (Bad file descriptor)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25904, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0x7fffd2c1d880, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "/usr/lib/YaST2/bin/y2controlcenter", X_OK) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "/usr/lib/YaST2/bin/y2controlcenter-gnome", X_OK) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [CHLD], 8) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25906
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(4)                                = 0
close(4)                                = -1 EBADF (Bad file descriptor)
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [CHLD], 8) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25907
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [CHLD], 8) = 0
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [CHLD], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 25906
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 25907
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0
close(3)                                = -1 EBADF (Bad file descriptor)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25906, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, 0x7fffd2c1d680, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "\nif [ \"$SELECTED_GUI\" = \"ncurses"..., 8192) = 2748
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -881, SEEK_CUR)              = 9294
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25908
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x429cd4, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
close(4)                                = 0
read(3, "/home/micha\n", 128)           = 12
read(3, "", 128)                        = 0
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=25908, si_status=0, si_utime=0, si_stime=0} ---
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG, NULL) = 25908
wait4(-1, 0x7fffd2c1d740, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn()                          = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "/home/micha/.qt//qtrc", R_OK) = -1 ENOENT (No such file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "\n\n# do it!\n# $@ are args for ycp"..., 8192) = 881
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "", X_OK)           = -1 ENOENT (No such file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
faccessat(AT_FDCWD, "/usr/bin/snapper", X_OK) = -1 ENOENT (No such file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [INT CHLD], 8) = 0
rt_sigprocmask(SIG_SETMASK, [INT CHLD], NULL, 8) = 0
lseek(255, -73, SEEK_CUR)               = 10102
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f3bbbea99d0) = 25911
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x428930, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, {SIG_DFL, [], SA_RESTORER|SA_RESTART, 0x7f3bbb2c38d0}, 8) = 0
wait4(-1,

den Ablauf der Soundkonfiguration beobachtet, weiter bis zum "wait" kommt Yast einfach nicht :???:

In meiner Verzweiflung habe ich selbst die 32 Bit Varianten von Alsa nebst Kompatibilitätsbibliotheken installiert und 'rum experimentiert – ohne Erfolg.

Code:

rpm -qa | grep alsa
pyalsa-1.0.26-5.1.2.x86_64
alsamixergui-0.9.0rc1-1511.1.x86_64
alsa-plugins-pulse-32bit-1.0.27-3.1.1.x86_64
alsa-utils-1.0.27.2-4.2.1.x86_64
alsa-1.0.27.2-3.5.1.x86_64
alsa-plugins-32bit-1.0.27-3.1.1.x86_64
alsa-oss-1.0.25-8.1.2.x86_64
alsa-docs-1.0.27.2-3.5.1.noarch
alsa-plugins-1.0.27-3.1.1.x86_64
alsa-firmware-1.0.27-2.1.2.noarch
alsa-oss-32bit-1.0.25-8.1.2.x86_64
alsa-tools-gui-1.0.27-5.1.3.x86_64
alsa-plugins-pulse-1.0.27-3.1.1.x86_64
alsa-tools-1.0.27-5.1.3.x86_64

rpm -qa | grep pulse
pulseaudio-module-x11-4.0.git.270.g9490a-8.1.x86_64
alsa-plugins-pulse-32bit-1.0.27-3.1.1.x86_64
libpulse-mainloop-glib0-4.0.git.270.g9490a-8.1.x86_64
pulseaudio-utils-4.0.git.270.g9490a-8.1.x86_64
libpulse0-4.0.git.270.g9490a-8.1.x86_64
pulseaudio-module-bluetooth-4.0.git.270.g9490a-8.1.x86_64
pulseaudio-module-jack-4.0.git.270.g9490a-8.1.x86_64
libxine2-pulse-1.2.5-90.2.x86_64
alsa-plugins-pulse-1.0.27-3.1.1.x86_64
pulseaudio-4.0.git.270.g9490a-8.1.x86_64
pulseaudio-module-lirc-4.0.git.270.g9490a-8.1.x86_64
libpulse0-32bit-4.0.git.270.g9490a-8.1.x86_64
pulseaudio-module-zeroconf-4.0.git.270.g9490a-8.1.x86_64

rpm -q libasound2
libasound2-1.0.27.2-3.5.1.x86_64

Folgende Kernelmodule sind geladen...

Code:

cat /proc/modules | grep snd
snd_hda_intel 71063 1 - Loading 0xffffffffa0cfa000
snd_hda_codec 205080 1 snd_hda_intel, Live 0xffffffffa0c92000
snd_hwdep 13602 1 snd_hda_codec, Live 0xffffffffa0c32000
snd_pcm 110211 2 snd_hda_intel,snd_hda_codec, Live 0xffffffffa0c40000
snd_timer 29423 1 snd_pcm, Live 0xffffffffa0c37000
snd 87417 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer, Live 0xffffffffa0bd7000
soundcore 15047 1 snd, Live 0xffffffffa0099000
snd_page_alloc 18710 2 snd_hda_intel,snd_pcm, Live 0xffffffffa0b4a000

Gibt es eventuell eine Möglichkeit den Onboardsound von Hand zu konfigurieren?
Bedauerlicher weise bin ich nicht sonderlich fit in soundconfigs.
Was müsste ich denn sinnvolles hier Eintragen?
(Yast2 sound → 82801G ICH7 Family High Definition Audio Controller → Sound Card Advanced Options)

Code:

power_save
bdl_pos_adj
probe_mask
Position_fix
enable_msi
snoop
align_buffer_size
jackpoll_ms
probe_only
patch
power_save_controller
beep_mode
single_cmd
model

Weiß da wer Rat?

Weiß jemand wo ich noch nachschauen könnte, auf der Alsa Projektseite habe ich bezüglich meiner Hardware (ICH7 Family High Definition Audio Controller [82801G]) nichts wirklich erhellendes in Erfahrung bringen können.
Tante Google hat da zwar mehr zu bieten, habe aber meine Problemstellung noch nicht ausfindig machen können.

Gruß Micha (heizer)

josef-wien · 4 Mai 2014

heizer schrieb:
siehe Edit

Es war keine sehr glückliche Idee, angeforderte Informationen in einem früheren Beitrag zu verstecken.

Wenn YaST streikt, würde ich es einmal als root mit

Code:

alsaconf

versuchen (bei 2 Karten mit demselben Treiber kann ich keine /etc/modprobe.d/50-sound.conf "zusammenstoppeln").

heizer · 4 Mai 2014

josef-wien schrieb:
heizer schrieb:

siehe Edit

Zum Vergrößern anklicken....

Es war keine sehr glückliche Idee, angeforderte Informationen in einem früheren Beitrag zu verstecken.

Wenn YaST streikt, würde ich es einmal als root mit

Code:

alsaconf

versuchen (bei 2 Karten mit demselben Treiber kann ich keine /etc/modprobe.d/50-sound.conf "zusammenstoppeln").

Hab' ich auch bemerkt, da sich eine geraume Zeit niemand gemeldet hatte, hab' ein Händchen für „unglückliche“ Entscheidungen (Dinge zu verkomplizieren)...

ps:

Nun ich habe auch den Eindruck, das es nicht gut ist wenn der selbe Treiber zwei mal völlig unterschiedliche Hardware versucht zugänglich zu machen.
Leider ist es ein bisschen blöd dann die Grafikkarte aus zu bauen damit Yast nur den Onboardsound konfigurieren kann... :roll:

Alsaconf hatte ich schon durch (trotzdem danke), nada – alsaconf findet nicht einmal irgendetwas verwertbares. Den Soundausgang der Nvidia Grafikkarte verwende ich überhaupt nicht, würde den Eintrag sogar löschen, aber leider versagt Yast2 seinen Dienst sobald ich irgendetwas an der Soundkonfiguration ändere... :zensur:

Gruß Micha (heizer)

josef-wien · 4 Mai 2014

heizer schrieb:
Nun ich habe auch den Eindruck, das es nicht gut ist wenn der selbe Treiber zwei mal völlig unterschiedliche Hardware versucht zugänglich zu machen.

An und für sich funktioniert das. Vielleicht findet sich jemand mit dieser Konstellation ("Intel 82801G (ICH7 Family) High Definition Audio Controller" und "nVidia Audio device", wobei es vermutlich auch ein andere "ICH" sein kann), der Dir seine /etc/modprobe.d/50-sound.conf zur Verfügung stellt.

heizer schrieb:
wait4(-1,

Mit genau dieser Zeile hört die Ausgabe auch bei mir auf, allerdings wird das YaST-Modul geladen. Erst wenn ich auf "OK" oder "Abbrechen" klicke, geht es auf der Konsole weiter. Es ist auf Grund der Datenfülle kompliziert, aber vielleicht findest Du in /var/log/YaST2/y2log etwas.

Mehr fällt mir zu dem Problem nicht ein.

heizer · 5 Mai 2014

Hiho josef-wien,
vielen Dank für deine Bemühungen, seit nunmehr einer Stunde beobachte ich via

Code:

tail -f /var/log/YaST2/y2log

Yast beim „nichts tun“.
Der letzte Eintrag in diesem Logfile lautet

Code:

2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] sound/volume_routines.rb:148 modprobe commands: ["/sbin/modprobe -C /dev/null snd-hda-intel "]

Schaue ich mittels

Code:

ps ax | grep -v grep | grep  modprobe

in meine Prozessliste, findet sich der Eintrag dort wieder

Code:

5511 pts/1    S+     0:02 /sbin/modprobe -C /dev/null snd_hda_intel

und hat in einer Stunde zwar genau 2 Minuten und 45 Sekunden CPU Zeit (mit nichts tun) Verbraten aber nix gewerkelt und pennt sich somit eher aus...

Es ist zum Mäuse melken, ich bin beinahe soweit und organisiere mir 'ne alte SB16 und versuche es damit... :zensur:

Gruß Micha (heizer)

EDIT:
Der Vollständigkeit halber das komplette Log seit dem Aufruf von Yast

Code:

> tail -f /var/log/YaST2/y2log
2014-05-05 18:04:07 <1> ruebezahl(16354) [libstorage] AsciiFile.cc(reload):62 loading file /var/log/YaST2/arch.info.tmp
2014-05-05 18:04:07 <1> ruebezahl(16354) [libstorage] AsciiFile.cc(reload):62 loading file /var/log/YaST2/arch.info
2014-05-05 18:04:07 <1> ruebezahl(16354) [libstorage] Storage.cc(~Storage):438 destructed Storage
2014-05-05 18:04:07 <1> ruebezahl(16354) [libstorage] Lock.cc(~Lock):109 releasing lock
2014-05-05 18:04:07 <1> ruebezahl(16354) [Interpreter] clients/disk.rb:85 Called YaST client returned.
2014-05-05 18:04:07 <1> ruebezahl(16354) [Ruby] clients/disk.rb:86 --- Returned: true ---
2014-05-05 18:04:07 <1> ruebezahl(16354) [liby2] genericfrontend.cc(main):778 Finished YaST2 component 'y2base'
2014-05-05 18:04:07 <1> ruebezahl(16354) [liby2] genericfrontend.cc(main):783 Exiting with client return value 'true'
2014-05-05 18:04:08 <1> ruebezahl(16354) [Y2Ruby] binary/YRuby.cc(~YRuby):107 Shutting down ruby interpreter.
2014-05-05 18:04:08 <1> ruebezahl(16354) [Y2Perl] YPerl.cc(destroy):164 Shutting down embedded Perl interpreter.
2014-05-05 19:07:21 <1> ruebezahl(5442) [liby2] genericfrontend.cc(main):575 Launched YaST2 component 'y2base' 'sound' 'qt'
2014-05-05 19:07:21 <1> ruebezahl(5442) [ui-component] YUIComponentCreator.cc(createInternal):124 Creating UI component for ""
2014-05-05 19:07:21 <1> ruebezahl(5442) [liby2] genericfrontend.cc(main):764 YAST_IS_RUNNING is yes
2014-05-05 19:07:21 <1> ruebezahl(5442) [Ruby] yast/wfm.rb:81 Call client /usr/share/YaST2/clients/sound.rb
2014-05-05 19:07:21 <1> ruebezahl(5442) [Ruby] clients/sound.rb:25 ----------------------------------------
2014-05-05 19:07:21 <1> ruebezahl(5442) [Ruby] clients/sound.rb:26 Sound module started
2014-05-05 19:07:22 <1> ruebezahl(5442) [Y2Perl] Y2PerlComponent.cc(Y2PerlComponent):35 Creating Y2PerlComponent
2014-05-05 19:07:22 <1> ruebezahl(5442) [Pkg] PkgModule.cc(instance):68 Redirecting ZYPP log to y2log
2014-05-05 19:07:23 <1> ruebezahl(5442) [Ruby] modules/PackageCallbacks.rb:3672 PackageCallbacks constructor
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2968 Pkg Builtin called: CallbackProcessStart
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2971 Pkg Builtin called: CallbackProcessProgress
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2974 Pkg Builtin called: CallbackProcessNextStage
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2977 Pkg Builtin called: CallbackProcessDone
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2983 Pkg Builtin called: CallbackStartProvide
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2986 Pkg Builtin called: CallbackProgressProvide
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2989 Pkg Builtin called: CallbackDoneProvide
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2992 Pkg Builtin called: CallbackStartPackage
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2998 Pkg Builtin called: CallbackProgressPackage                                   
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3001 Pkg Builtin called: CallbackDonePackage                                       
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3009 Pkg Builtin called: CallbackStartDeltaDownload                                
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3012 Pkg Builtin called: CallbackProgressDeltaDownload                             
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3015 Pkg Builtin called: CallbackProblemDeltaDownload                              
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3018 Pkg Builtin called: CallbackFinishDeltaDownload                               
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3022 Pkg Builtin called: CallbackStartDeltaApply                                   
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3025 Pkg Builtin called: CallbackProgressDeltaApply                                
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3028 Pkg Builtin called: CallbackProblemDeltaApply                                 
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3031 Pkg Builtin called: CallbackFinishDeltaApply                                  
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3035 Pkg Builtin called: CallbackStartPatchDownload                                
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3038 Pkg Builtin called: CallbackProgressPatchDownload                             
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3041 Pkg Builtin called: CallbackProblemPatchDownload                              
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3044 Pkg Builtin called: CallbackFinishPatchDownload                               
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2920 Pkg Builtin called: CallbackSourceCreateStart                                 
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2923 Pkg Builtin called: CallbackSourceCreateProgress                              
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2926 Pkg Builtin called: CallbackSourceCreateError                                 
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2929 Pkg Builtin called: CallbackSourceCreateEnd                                   
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2932 Pkg Builtin called: CallbackSourceCreateInit                                  
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2935 Pkg Builtin called: CallbackSourceCreateDestroy                               
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2944 Pkg Builtin called: CallbackSourceProbeStart                                  
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2947 Pkg Builtin called: CallbackSourceProbeFailed
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2950 Pkg Builtin called: CallbackSourceProbeSucceeded
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2953 Pkg Builtin called: CallbackSourceProbeProgress
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2956 Pkg Builtin called: CallbackSourceProbeError
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2959 Pkg Builtin called: CallbackSourceProbeEnd
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3053 Pkg Builtin called: CallbackSourceReportStart
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3056 Pkg Builtin called: CallbackSourceReportProgress
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3059 Pkg Builtin called: CallbackSourceReportError
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3065 Pkg Builtin called: CallbackSourceReportEnd
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3071 Pkg Builtin called: CallbackSourceReportInit
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3074 Pkg Builtin called: CallbackSourceReportDestroy
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3082 Pkg Builtin called: CallbackProgressReportStart
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3088 Pkg Builtin called: CallbackProgressReportProgress
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3094 Pkg Builtin called: CallbackProgressReportEnd
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3118 Pkg Builtin called: CallbackAuthentication
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3130 Pkg Builtin called: CallbackAcceptUnsignedFile
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3136 Pkg Builtin called: CallbackAcceptUnknownGpgKey
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3142 Pkg Builtin called: CallbackImportGpgKey
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3148 Pkg Builtin called: CallbackAcceptVerificationFailed
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3154 Pkg Builtin called: CallbackTrustedKeyAdded
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3160 Pkg Builtin called: CallbackTrustedKeyRemoved
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3166 Pkg Builtin called: CallbackAcceptFileWithoutChecksum
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3172 Pkg Builtin called: CallbackAcceptWrongDigest
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:3178 Pkg Builtin called: CallbackAcceptUnknownDigest
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2817 Pkg Builtin called: CallbackMediaChange
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2823 Pkg Builtin called: CallbackSourceChange
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2843 Pkg Builtin called: CallbackScriptStart
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2846 Pkg Builtin called: CallbackScriptProgress
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2849 Pkg Builtin called: CallbackScriptProblem
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2852 Pkg Builtin called: CallbackScriptFinish
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2854 Pkg Builtin called: CallbackMessage
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2862 Pkg Builtin called: CallbackStartScanDb
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2863 Pkg Builtin called: CallbackProgressScanDb
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2866 Pkg Builtin called: CallbackErrorScanDb
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2869 Pkg Builtin called: CallbackDoneScanDb
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2886 Pkg Builtin called: CallbackInitDownload
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2887 Pkg Builtin called: CallbackStartDownload
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2890 Pkg Builtin called: CallbackProgressDownload
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2896 Pkg Builtin called: CallbackDoneDownload
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2899 Pkg Builtin called: CallbackDestDownload
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2900 Pkg Builtin called: CallbackStartRefresh
2014-05-05 19:07:23 <1> ruebezahl(5442) [Pkg] modules/PackageCallbacks.rb:2901 Pkg Builtin called: CallbackDoneRefresh
2014-05-05 19:07:23 <1> ruebezahl(5442) [Ruby] modules/CommandLine.rb:1557 ----------------------------------------
2014-05-05 19:07:23 <1> ruebezahl(5442) [Ruby] modules/CommandLine.rb:1558 Command line interface started
2014-05-05 19:07:23 <1> ruebezahl(5442) [Ruby] modules/Misc.rb:197 ."//etc/os-release"."NAME": 'openSUSE'
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(setProgDir):60 Set progDir to "/usr/share/YaST2"
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(setProgDir):61 progDir is now locked.
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(setLocaleDir):146 Set localeDir to "/usr/share/YaST2/locale"
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(setLocaleDir):147 localeDir is now locked.
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(YPath):49 Given filename: libyui-qt.so.5
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2"
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(YPath):66 Subdir given with filename: 
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(YPath):67 Looking for: libyui-qt.so.5
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPath.cc(YPath):118 Found libyui-qt.so.5 in /usr/lib64/yui
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YUI.cc(YUI):76 This is libyui 3.0.10
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YUI.cc(YUI):77 Creating UI with threads
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(YQUI):99 This is libyui-qt 2.43.5
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-styler] QY2Styler.cc(loadStyleSheet):91 Using style sheet "/usr/share/YaST2/theme/current/wizard/style.qss"
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(processCommandLineArgs):297 Qt argument: YaST2
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(processCommandLineArgs):297 Qt argument: sound
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(processCommandLineArgs):297 Qt argument: qt
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(calcDefaultSize):431 Default size: 896 x 687
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(initUI):261 Forcing /usr/lib64/libQtGui.so.4 open successful
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQApplication.cc(loadPredefinedQtTranslations):127 Selected language: de_DE
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQApplication.cc(loadPredefinedQtTranslations):156 Loaded translations for predefined Qt dialogs from /usr/share/qt4/translations/qt_de_DE.qm
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(initUI):274 YQUI initialized. Thread ID: 0x7f5e48d12700
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#b9dc8cf'
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#ffff'
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#ffff'
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YSettings.cc(localeDir):161 localeDir: "/usr/share/YaST2/locale"
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):711 <libqt-debug> Registering  QFrame(0x7f5e441cde70, name = "work_area")  for parent  YQWizard(0x7f5e441cc910, name = "wizard") 
2014-05-05 19:07:23 <1> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):711 
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QLayout: Attempting to add QLayout "" to QFrame "work_area", which already has a layout
2014-05-05 19:07:23 <1> ruebezahl(5442) [ui] YPushButton.cc(setFunctionKey):188 Guessing button role YOKButton for YPushButton "Next" at 0x7f5e442f81f8 from function key F10
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#b9dc8cf'
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#ffff'
2014-05-05 19:07:23 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> QCssParser::parseHexColor: Unknown color name '#ffff'
2014-05-05 19:07:28 <1> ruebezahl(5442) [Ruby] sound/read_routines.rb:307 /etc/modprobe.d/50-sound.conf doesn't exist
2014-05-05 19:07:28 <1> ruebezahl(5442) [Ruby] sound/read_routines.rb:318 /etc/modprobe.conf doesn't exist
2014-05-05 19:07:28 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:474 read_save_info: []
2014-05-05 19:07:28 <2> ruebezahl(5442) [Interpreter] sound/routines.rb:610 Scripting agent sweeping
2014-05-05 19:07:29 <2> ruebezahl(5442) [scr] ScriptingAgent.cc(parseSingleConfigFile):165 Ignoring re-registration of path '.target'
2014-05-05 19:07:29 <2> ruebezahl(5442) [scr] ScriptingAgent.cc(parseSingleConfigFile):165 Ignoring re-registration of path '.probe'
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] sound/routines.rb:773 card: 'Intel 82801G (ICH7 Family) High Definition Audio Controller', using module snd-hda-intel
2014-05-05 19:07:29 <2> ruebezahl(5442) [Ruby] sound/routines.rb:733 device_id (3043) not found
2014-05-05 19:07:29 <2> ruebezahl(5442) [Ruby] sound/routines.rb:740 Missing driver name in DB for card: $["bus":"PCI", "bus_hwcfg":"pci", "bus_id":1, "class/home/micha                                                                                                                                          [20:23]
v000010DEsd00000862bc04sc03i00", "model":"nVidia Audio device", "old_unique_key":"O2Bh.ukALa87MFX5", "parent_unique_key":"vSkL.sBCJa6uSmM6", "resource":$["irq":[$["count":0, "enabled":true, "irq":10]], "mem":[$["active":true, "length":16384, "start":4140826624]]], "rev":"161", "sub_class_id":3, "sub_device_id":67682, "sub_vendor":"nVidia Corporation", "sub_vendor_id":69854, "sysfs_bus_id":"0000:01:00.1", "sysfs_id":"/devices/pci0000:00/0000:00:01.0/0000:01:00.1", "unique_key":"NXNs.ukALa87MFX5", "vendor":"nVidia Corporation", "vendor_id":69854]
2014-05-05 19:07:29 <2> ruebezahl(5442) [Ruby] sound/routines.rb:749 Using driver provided by hwinfo: snd-hda-intel
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] sound/routines.rb:773 card: 'nVidia Audio device', using module snd-hda-intel
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] modules/PulseAudio.rb:55 Read status: $["exit":0, "stderr":"", "stdout":"enabled\n"]
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] modules/PulseAudio.rb:62 PulseAudio is enabled
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] sound/complex.rb:48 unconfigured_cards: [$["bus":"pci", "bus_id":"0000:00:1b.0", "device_id":75736, "model":"82801G (ICH7 Family) High Definition Audio Controller", "module":"snd-hda-intel", "options":$["beep_mode":"0", "power_save_controller":"0", "single_cmd":"0", "snoop":"0"], "sub_device_id":75788, "sub_vendor_id":69692, "unique_key":"u1Nb.fGuMkV_Y2fA", "vendor_id":98438], $["bus":"pci", "bus_id":"0000:01:00.1", "device_id":68579, "model":"nVidia Corporation", "module":"snd-hda-intel", "options":$["beep_mode":"0", "power_save_controller":"0", "single_cmd":"0", "snoop":"0"], "sub_device_id":67682, "sub_vendor_id":69854, "unique_key":"NXNs.ukALa87MFX5", "vendor_id":69854]]
2014-05-05 19:07:29 <1> ruebezahl(5442) [Ruby] sound/complex.rb:49 modules_conf: []
2014-05-05 19:07:37 <1> ruebezahl(5442) [Ruby] sound/complex.rb:535 WaitForEvent: $["event":$["EventReason":"Activated", "EventSerialNo":0, "EventType":"WidgetEvent", "ID":`edit, "WidgetClass":`PushButton, "WidgetDebugLabel":"Edit", "WidgetID":`edit], "selected":"u1Nb.fGuMkV_Y2fA"]
2014-05-05 19:07:37 <1> ruebezahl(5442) [Ruby] sound/complex.rb:312 uniq (u1Nb.fGuMkV_Y2fA) in configured: nil, in detected: 0
2014-05-05 19:07:37 <1> ruebezahl(5442) [Ruby] sound/complex.rb:325 adding new card u1Nb.fGuMkV_Y2fA
2014-05-05 19:07:37 <1> ruebezahl(5442) [Ruby] sound/routines.rb:264 add_common_options: card: 0, entry: $["bus":"pci", "bus_id":"0000:00:1b.0", "device_id":75736, "model":"82801G (ICH7 Family) High Definition Audio Controller", "module":"snd-hda-intel", "options":$["beep_mode":"0", "power_save_controller":"0", "single_cmd":"0", "snoop":"0"], "sub_device_id":75788, "sub_vendor_id":69692, "unique_key":"u1Nb.fGuMkV_Y2fA", "vendor_id":98438]
2014-05-05 19:07:44 <1> ruebezahl(5442) [Ruby] sound/volume.rb:250 sound_volume($["alias":"snd-card-0", "bus":"pci", "bus_id":"0000:00:1b.0", "device_id":75736, "model":"82801G (ICH7 Family) High Definition Audio Controller", "module":"snd-hda-intel", "options":$["beep_mode":"0", "index":"0", "power_save_controller":"0", "single_cmd":"0", "snoop":"0"], "sub_device_id":75788, "sub_vendor_id":69692, "unique_key":"u1Nb.fGuMkV_Y2fA", "vendor_id":98438], 0, false, false, []) started
2014-05-05 19:07:44 <1> ruebezahl(5442) [Ruby] sound/volume_routines.rb:250 Checking audio files: []
2014-05-05 19:07:44 <1> ruebezahl(5442) [Ruby] sound/volume_routines.rb:253 No audio device file found, skipping fuser call
2014-05-05 19:07:44 <1> ruebezahl(5442) [Ruby] sound/volume_routines.rb:188 Executing: /usr/lib/YaST2/bin/alsadrivers unload
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:941 Default module parameters: $["align_buffer_size":$["descr":"Force buffer and period sizes to be multiple of 128 bytes."], "bdl_pos_adj":$["descr":"BDL position adjustment offset."], "beep_mode":$["allows":"{{0,Disabled},{1,Enabled}}", "default":"0", "descr":"Select HDA Beep registration mode (0=off, 1=on) (default=1).", "dialog":"check"], "enable_msi":$["descr":"Enable Message Signaled Interrupt (MSI)"], "jackpoll_ms":$["descr":"Ms between polling for jack events (default = 0, using unsol events only)"], "model":$["descr":"Use the given board model."], "patch":$["descr":"Patch file for Intel HD audio interface."], "position_fix":$["descr":"DMA pointer read method.(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO)."], "power_save":$["descr":"Automatic power-saving timeout (in second, 0 = disable)."], "power_save_controller":$["allows":"{{0,Disabled},{1,Enabled}}", "default":"0", "descr":"Reset controller in power save mode.", "dialog":"check"], "probe_mask":$["descr":"Bitmask to probe codecs (default = -1)."], "probe_only":$["descr":"Only probing and no codec initialization."], "single_cmd":$["allows":"{{0,Disabled},{1,Enabled}}", "default":"0", "descr":"Use single command to communicate with codecs (for debugging only).", "dialog":"check"], "snoop":$["allows":"{{0,Disabled},{1,Enabled}}", "default":"0", "descr":"Enable/disable snooping", "dialog":"check"]]
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:944 options: ["beep_mode", "index", "power_save_controller", "single_cmd", "snoop"]
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:945 module options: [$["beep_mode":"0", "index":"0", "power_save_controller":"0", "single_cmd":"0", "snoop":"0"]]
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:976 collected options: $["index":"0"]
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] modules/Sound.rb:1028 Modprobe commands: ["/sbin/modprobe -C /dev/null snd-hda-intel "]
2014-05-05 19:07:46 <1> ruebezahl(5442) [Ruby] sound/volume_routines.rb:148 modprobe commands: ["/sbin/modprobe -C /dev/null snd-hda-intel "]
2014-05-05 20:23:14 <2> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):715 <libqt-warning> YaST2: Fatal IO error: client killed
2014-05-05 20:23:14 <3> ruebezahl(5442) [qt-ui] YQUI.cc(qMessageHandler):730 Client killed. Possibly caused by X server shutdown or crash.                   
2014-05-05 20:23:15 <1> ruebezahl(5442) [ui] YUI.cc(~YUITerminator):525 Shutting down UI
2014-05-05 20:23:15 <3> ruebezahl(5442) [ui] YUI.cc(~YUI):88 shutdownThreads() was never called!
2014-05-05 20:23:15 <3> ruebezahl(5442) [ui] YUI.cc(~YUI):89 shutting down now - this might segfault

Die letzten fünf Zeilen sind meinem Prozess "abwürgen" geschuldet...

Heinz-Peter · 5 Mai 2014

Nach der Ausgabe von

Code:

 hwinfo --sound

hast du zwei Sound Karten die das gleiche Modul benötigen

Code:

 Driver Status: snd_hda_intel is active
  Driver Activation Cmd: "modprobe snd_hda_intel"

Ich denke hier liegt das Problem.
Kannst die eine deaktivieren? Es stellt sich aber die Frage, Wie?

heizer · 5 Mai 2014

Heinz-Peter schrieb:
Nach der Ausgabe von

Code:

hwinfo --sound

hast du zwei Sound Karten die das gleiche Modul benötigen

Code:

Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel"

Ich denke hier liegt das Problem.
Kannst die eine deaktivieren? Es stellt sich aber die Frage, Wie?

Ja das ist die Frage, da sich Yast in den Dornröschenschlaf begibt sobald ich die vorgenommenen Änderungen mit dem OK-Button abnicke... :zensur:

Gruß Micha (heizer)

Heinz-Peter · 5 Mai 2014

Ich habe hier unter /etc/modprobe.d/ eine text Datei mit dem Namen 50-sound.conf mit dem Text

Code:

options snd-hda-intel model=min_fp
options snd slots=snd-hda-intel
# u1Nb.MiJttoOQZb2:82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
alias snd-card-0 snd-hda-intel

Wie sieht das bei dir?

josef-wien · 5 Mai 2014

Höchst eigenartig, daß ein simpler modprobe-Befehl einfach hängenbleibt. Passiert das auch, wenn Du diesen Befehl in der Konsole aufrufst?

Nützt es etwas, wenn Du in YaST rechts unten unter "Andere" PulseAudio deaktivierst (alternativ geht das auch über den Editor für /etc/sysconfig oder direkt in /etc/sysconfig/sound mit PULSEAUDIO_ENABLE="no" samt anschließendem Neustart von alsasound)?

heizer · 6 Mai 2014

Heinz-Peter schrieb:
Ich habe hier unter /etc/modprobe.d/ eine text Datei mit dem Namen 50-sound.conf mit dem Text

Code:

options snd-hda-intel model=min_fp options snd slots=snd-hda-intel # u1Nb.MiJttoOQZb2:82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller alias snd-card-0 snd-hda-intel

Wie sieht das bei dir?

Hiho Heinz-Peter,

danke für deine Bemühungen, leider fehlt bei mir diese Datei, es gib lediglich die Datei mit dem Namen "50-alsa.conf"...

Gruß Micha (heizer)

heizer · 6 Mai 2014

josef-wien schrieb:
Höchst eigenartig, daß ein simpler modprobe-Befehl einfach hängenbleibt. Passiert das auch, wenn Du diesen Befehl in der Konsole aufrufst?

Nützt es etwas, wenn Du in YaST rechts unten unter "Andere" PulseAudio deaktivierst (alternativ geht das auch über den Editor für /etc/sysconfig oder direkt in /etc/sysconfig/sound mit PULSEAUDIO_ENABLE="no" samt anschließendem Neustart von alsasound)?

Hiho josef-wien,

jep der modprobe Befehl (für das Soundmodul) hängt sich auch in der Konsole auf, es geht einfach nicht weiter...
leider hatte ich damit auch schon erfolglos herumgepriemt (Pulseaudio in Yast ausgeschaltet, das ging ohne Probleme), es aber nicht erwähnt, trotzdem Danke. :???:

Gruß Micha (heizer)

Heinz-Peter · 6 Mai 2014

josef-wien schrieb:
Nützt es etwas, wenn Du in YaST rechts unten unter "Andere" PulseAudio deaktivierst (alternativ geht das auch über den Editor für /etc/sysconfig oder direkt in /etc/sysconfig/sound mit PULSEAUDIO_ENABLE="no" samt anschließendem Neustart von alsasound)?

Es fehlt noch die Antwort auf diese Frage von @josef-wien.

Hiho Heinz-Peter,

danke für deine Bemühungen, leider fehlt bei mir diese Datei, es gib lediglich die Datei mit dem Namen "50-alsa.conf"...

Die Datei habe ich auch, siehe hier:

Code:

install snd /sbin/install-snd-module snd $CMDLINE_OPTS
install snd-pcm /sbin/install-snd-module snd-pcm $CMDLINE_OPTS
install snd-seq /sbin/install-snd-module snd-seq $CMDLINE_OPTS

Was steht bei dir unter Systemeinstellungen => Multimedie, siehe Bild

Edit: Hier noch ein Geistesblitz

Was passiert wenn du einfach die Datei 50-sound.conf selber mit KWrite erstellst und in das Verzeichnis /etc/modprobe.d/ ablegst?

heizer · 6 Mai 2014

Heinz-Peter schrieb:
josef-wien schrieb:

Nützt es etwas, wenn Du in YaST rechts unten unter "Andere" PulseAudio deaktivierst (alternativ geht das auch über den Editor für /etc/sysconfig oder direkt in /etc/sysconfig/sound mit PULSEAUDIO_ENABLE="no" samt anschließendem Neustart von alsasound)?

Zum Vergrößern anklicken....

Es fehlt noch die Antwort auf diese Frage von @josef-wien.

Hiho Heinz-Peter,

danke für deine Bemühungen, leider fehlt bei mir diese Datei, es gib lediglich die Datei mit dem Namen "50-alsa.conf"...

Zum Vergrößern anklicken....

Die Datei habe ich auch, siehe hier:

Code:

install snd /sbin/install-snd-module snd $CMDLINE_OPTS install snd-pcm /sbin/install-snd-module snd-pcm $CMDLINE_OPTS install snd-seq /sbin/install-snd-module snd-seq $CMDLINE_OPTS

Was steht bei dir unter Systemeinstellungen => Multimedie, siehe Bild

Edit: Hier noch ein Geistesblitz Was passiert wenn du einfach die Datei 50-sound.conf selber mit KWrite erstellst und in das Verzeichnis /etc/modprobe.d/ ablegst?

Hiho Heinz-Peter,
war auch mein erster Versuch gleich nach dem ich deinen vorherigen Post gelesen hatte - kein Erfolg!

Ich hatte dann zwar eine dritte Soundkarte in Yast, aber leider auch ohne Funktion und Yast verhielt sich sperrig wie ehedem :igitt:

Gruß Micha (heizer)

josef-wien · 6 Mai 2014

Du hast nach dem Erstellen der Datei 50-sound.conf den Rechner neu gestartet, und cat /proc/asound/modules sowie cat /proc/asound/cards liefern nach wie vor kein Ergebnis? Was kommt bei

Code:

dmesg | egrep -i "alsa|snd|sound"

heraus? So nebenbei, kommt bei

Code:

lsmod | grep edac
rpm -V module-init-tools

etwas heraus?

P. S. Das Zitieren ganzer Beiträge macht das Lesen mühsam.

heizer · 7 Juni 2014

Entschuldigung das ich mich erst jetzt wieder melde, wir sind schon seit geraumer Zt. mitten in einer Hardware-Ablösung & Virtualisierung...

Zu Deinen Fragen, ja nach dem erstellen der Datei 50-sound.conf habe ich selbstredent den Rechner die Hardware durch einen Reboot neu initialisieren lassen...

Bei Eingabe der Befehle (als root) erhalte ich folgende Ausgaben:

Code:

cat /proc/asound/modules
0 snd_ens1371
1 snd_hda_intel

cat /proc/asound/cards
0 [AudioPCI       ]: ENS1371 - Ensoniq AudioPCI
                      Ensoniq AudioPCI ENS1371 at 0x1100, irq 18
1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xf7200000 irq 17

dmesg | egrep -i "alsa|snd|sound"
[   41.990392] ALSA hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
[   41.990432] ALSA hda_intel.c:3593 0000:01:00.1: Disabling 64bit DMA
[   41.993270] ALSA hda_intel.c:1748 0000:01:00.1: Enable delay in RIRB handling
[   42.298201] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   42.298744] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[   42.299756] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[   42.299829] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10

lsmod | grep edac
i82975x_edac           19388  1 
edac_core              62342  1 i82975x_edac

Vielen Dank für Deine/Eure Gedult

Grüße Micha (heizer)

Edit:
P.S.
Mittlerweile habe ich eine alte Soundblaster 128 ins System eingebaut, darüber funktioniert der Sound, ohne weitere Einrichtung.
Bin aber gerne bereit sie wieder zu entfernen um das Yast-Soundproblem weiter zu verfolgen und es eventuel zum Erfolg zu führen.

Die Umstellungsarbeiten bei uns in der Firma sind nun nahezu abgeschlossen, so das ich ein wenig Zeit erübrigen kann.

josef-wien · 7 Juni 2014

Immerhin werden Deine Sound-Karten jetzt erkannt. Wenn trotz in alsamixer vernünftig eingestellten Reglern nichts zu hören ist, dann versuche die zusätzliche Zeile

Code:

blacklist i82975x_edac

in 50-sound.conf.

Ansonsten kannst Du wie Heinz-Peter die für Deine Karte möglichen Parameter in https://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt ermitteln und testen.

P. S. Das Ergebnis von

Code:

rpm -V module-init-tools

steht noch aus.