• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

ZusatzTastatur über USB "t" Problem bei I-Browser

K

kolo@post.cz

LINUX-MINT/Win-XP
hallo, mit meinem Notebook

bemerke ich schon seit längerem, daß bei "InternetBrowser" die USB Tastatur das T verzögert sogar beim ersten mal drücken auslässt. Passiert bei allen Browser "Firefox, Chrom, etc" .

Diese passiert nicht bei normalem "Editor" oder "office" .

Das komische ist, daß dieses nicht immer ist, Tastatur wurde schon getauscht. Jetzt gerade funzt es einwandfreit. :???:

Das ganze passiert bei LINUX und bei WinXP


was das wohl sein könnte
 
OP
K

kolo@post.cz

ja passiert an jedem Port

_________________________________________
( The camel died quite suddenly on the )
( second day, and Selena fretted sullenly )
( and, buffing her already impeccable )
( nails -- not for the first time since )
( the journey begain -- pondered snidely )
( if this would dissolve into a vignette )
( of minor inconveniences like all the )
( other holidays spent with Basil. )
( )
( -- Winning sentence, 1983 Bulwer-Lytton )
( bad fiction contest. )
-----------------------------------------
o
o
___
{~._.~}
( Y )
()~*~()
(_)-(_)
mint@mint ~ $ hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0
Unique ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
Unique ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0
Unique ID: uIhY.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0
Unique ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

07: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
Unique ID: 2XnU.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

08: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
Unique ID: 7eqy.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

09: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
Unique ID: BSFT.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux 2.6.32-21-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.32-21-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

10: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_58f_6254_noserial_if0
Unique ID: ADDn.RCJcL1C9RGA
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: hub
Model: "Alcor Micro Hub"
Hotplug: USB
Vendor: usb 0x058f "Alcor Micro Corp."
Device: usb 0x6254
Revision: "1.00"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v058Fp6254d0100dc09dsc00dp01ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)

11: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_402_5602_noserial_if0
Unique ID: cLrx.qSFQ6Cc6sG8
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: unknown
Model: "ALi USB2.0 Camera"
Hotplug: USB
Vendor: usb 0x0402 "ALi Corp."
Device: usb 0x5602 "USB2.0 Camera"
Revision: "1.00"
Driver: "ALi m5602"
Driver Modules: "gspca_m5602"
Speed: 480 Mbps
Module Alias: "usb:v0402p5602d0100dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: gspca_m5602 is active
Driver Activation Cmd: "modprobe gspca_m5602"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)

12: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_15a4_9015_010109170500004_if0
Unique ID: +rmv.08wFphpfieF
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0
SysFS BusID: 2-5:1.0
Hardware Class: unknown
Model: "Afatech DVB-T 2"
Hotplug: USB
Vendor: usb 0x15a4 "Afatech"
Device: usb 0x9015 "DVB-T 2"
Revision: "2.00"
Serial ID: "010109170500004"
Speed: 480 Mbps
Module Alias: "usb:v15A4p9015d0200dc00dsc00dp00icFFisc00ip00"
Driver Info #0:
Driver Status: dvb_usb_af9015 is active
Driver Activation Cmd: "modprobe dvb_usb_af9015"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)

13: USB 00.0: 10800 Keyboard
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0_logicaldev_input
Unique ID: rg_L.zf28dJqqZ1F
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0
SysFS BusID: 4-2:1.0
Hardware Class: keyboard
Model: "Holtek USB Keyboard"
Hotplug: USB
Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
Device: usb 0x1603 "USB Keyboard"
Revision: "3.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event6
Device Files: /dev/input/event6, /dev/char/13:70, /dev/input/by-id/usb-_USB_Keyboard-event-kbd, /dev/input/by-path/pci-0000:00:1a.1-usb-0:2:1.0-event-kbd
Device Number: char 13:70
Speed: 1.5 Mbps
Module Alias: "usb:v04D9p1603d0310dc00dsc00dp00ic03isc01ip01"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)

14: USB 00.1: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1_logicaldev_input
Unique ID: IsEQ.im7I_rdQU49
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1
SysFS BusID: 4-2:1.1
Hardware Class: unknown
Model: "Holtek USB Keyboard"
Hotplug: USB
Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
Device: usb 0x1603 "USB Keyboard"
Revision: "3.10"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/event7
Device Files: /dev/input/event7, /dev/char/13:71, /dev/input/by-id/usb-_USB_Keyboard-event-if01, /dev/input/by-path/pci-0000:00:1a.1-usb-0:2:1.1-event
Device Number: char 13:71
Speed: 1.5 Mbps
Module Alias: "usb:v04D9p1603d0310dc00dsc00dp00ic03isc00ip00"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)

15: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_147a_e017_C0015155_if0
Unique ID: wn1q.V4ve6Xr86ZF
Parent ID: 2XnU.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0
SysFS BusID: 5-2:1.0
Hardware Class: unknown
Model: "Formosa Industrial Computing SnowflakeEmulation"
Hotplug: USB
Vendor: usb 0x147a "Formosa Industrial Computing, Inc."
Device: usb 0xe017 "SnowflakeEmulation"
Revision: "1.30"
Serial ID: "C0015155"
Driver: "lirc_mceusb"
Driver Modules: "lirc_mceusb"
Speed: 1.5 Mbps
Module Alias: "usb:v147ApE017d0130dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: lirc_mceusb is active
Driver Activation Cmd: "modprobe lirc_mceusb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #7 (Hub)

16: USB 00.0: 10900 Printer
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4f9_27_K8J300631_if0_printer_noserial
Unique ID: lfzD.6jjwK1tcjz4
Parent ID: ADDn.RCJcL1C9RGA
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0
SysFS BusID: 1-1.1:1.0
Hardware Class: printer
Model: "Brother Industries HL-2030 series"
Hotplug: USB
Vendor: usb 0x04f9 "Brother Industries, Ltd"
Device: usb 0x0027 "HL-2030 series"
Revision: "1.00"
Serial ID: "K8J300631"
Driver: "usblp"
Driver Modules: "usblp"
Device File: /dev/usb/lp0
Device Files: /dev/usb/lp0, /dev/char/180:0, /dev/usblp0
Device Number: char 180:0
Speed: 12 Mbps
Module Alias: "usb:v04F9p0027d0100dc00dsc00dp00ic07isc01ip02"
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: "modprobe usblp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)

17: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_58f_6254_noserial_0_if0
Unique ID: BobO.RCJcL1C9RGA
Parent ID: ADDn.RCJcL1C9RGA
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0
SysFS BusID: 1-1.2:1.0
Hardware Class: hub
Model: "Alcor Micro Hub"
Hotplug: USB
Vendor: usb 0x058f "Alcor Micro Corp."
Device: usb 0x6254
Revision: "1.00"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v058Fp6254d0100dc09dsc00dp01ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)

18: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_7b3_40e_noserial_if0
Unique ID: S7RW.gZbhmOivw95
Parent ID: BobO.RCJcL1C9RGA
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0
SysFS BusID: 1-1.2.3:1.0
Hardware Class: unknown
Model: "Plustek 1200DPI USB Scanner"
Hotplug: USB
Vendor: usb 0x07b3 "Plustek"
Device: usb 0x040e "1200DPI USB Scanner"
Revision: "5.07"
Speed: 12 Mbps
Module Alias: "usb:v07B3p040Ed0507dc00dsc00dp00icFFiscFFipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (Hub)

19: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0
Unique ID: uF3h.jE42Ro6VMI4
Parent ID: BobO.RCJcL1C9RGA
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0
SysFS BusID: 1-1.2.4:1.0
Hardware Class: mouse
Model: "Logitech TrackMan Wheel"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc404 "TrackMan Wheel"
Revision: "2.20"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event8, /dev/char/13:72, /dev/input/by-id/usb-Logitech_Trackball-event-mouse, /dev/input/by-path/pci-0000:00:1a.7-usb-0:1.2.4:1.0-event-mouse, /dev/char/13:33, /dev/input/by-id/usb-Logitech_Trackball-mouse, /dev/input/by-path/pci-0000:00:1a.7-usb-0:1.2.4:1.0-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC404d0220dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (Hub)
mint@mint ~ $
:irre:
 
RME

RME

Hallo,

Vorschlag: mal alle usb Geräte (ausser Tastatur und Maus) aus-stecken.

Gruss,
Roland
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben