• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Hilfe bei Logauswertung

G

gTux

Hallo,
ich habe einen kleinen fileserver mit samba. Suse 11.2 - läuft schon seit Jahren im lan immer stabil. Ich habe heute früh festgestellt, dass er laute Geräusche macht und ich nicht auf die Dateien Zugreifen konnte. Allerdings kann ich immer mit putty rein. Ich habe also die /var/log/messages ausgelesen und siehe da, mir fällt die Temperatur der Laufwerke auf - kann es sein, daß das wirklich diese unglaubliche Zahl erreicht? Oder wurde ich angegriffen und das System wurde dazu verleitet die Temperatur zu steigen? Ich sehe, dass jemand versuchte mit ftp Verbindung aufzunehmen, die IP stammt aus Japan.

Code: 
Feb 29 17:20:07 juliett rsyslogd: -- MARK --
Feb 29 17:40:07 juliett rsyslogd: -- MARK --
Feb 29 17:58:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Feb 29 18:20:07 juliett rsyslogd: -- MARK --
Feb 29 18:28:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 157
Feb 29 18:40:07 juliett rsyslogd: -- MARK --
Feb 29 19:00:08 juliett rsyslogd: -- MARK --
Feb 29 19:20:08 juliett rsyslogd: -- MARK --
Feb 29 22:00:01 juliett /usr/sbin/cron[11820]: (root) CMD ( /usr/local/bin/ftplicity backup)
Feb 29 22:20:09 juliett rsyslogd: -- MARK --
Feb 29 22:40:09 juliett rsyslogd: -- MARK --
Mar  1 00:00:09 juliett rsyslogd: -- MARK --
Mar  1 00:20:09 juliett rsyslogd: -- MARK --
Mar  1 00:40:09 juliett rsyslogd: -- MARK --
Mar  1 04:58:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 123 to 100
Mar  1 05:20:11 juliett rsyslogd: -- MARK --
Mar  1 05:28:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 100 to 123
Mar  1 05:28:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 153
Mar  1 05:40:11 juliett rsyslogd: -- MARK --
Mar  1 06:00:11 juliett rsyslogd: -- MARK --
Mar  1 06:20:11 juliett rsyslogd: -- MARK --
Mar  1 09:00:01 juliett /usr/sbin/cron[15314]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 09:00:01 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] rsyslogd was HUPed,               type 'restart'.
Mar  1 09:00:01 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  1 09:00:01 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] (re)start
Mar  1 09:00:04 juliett kernel: [6912194.990946] kjournald starting.  Commit interval 15 seconds
Mar  1 09:00:04 juliett kernel: [6912194.991726] EXT3 FS on sdc3, internal journal
Mar  1 09:00:04 juliett kernel: [6912194.991754] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 09:00:06 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] rsyslogd was HUPed,               type 'restart'.
Mar  1 09:00:06 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  1 09:00:06 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] (re)start
Mar  1 09:20:06 juliett rsyslogd: -- MARK --
Mar  1 09:40:06 juliett rsyslogd: -- MARK --
Mar  1 09:58:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 150
Mar  1 10:00:01 juliett /usr/sbin/cron[15831]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 10:00:04 juliett kernel: [6915794.790344] kjournald starting.  Commit interval 15 seconds
Mar  1 10:00:04 juliett kernel: [6915794.791368] EXT3 FS on sdc3, internal journal
Mar  1 10:00:04 juliett kernel: [6915794.791396] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 10:20:07 juliett rsyslogd: -- MARK --
Mar  1 10:40:07 juliett rsyslogd: -- MARK --
Mar  1 11:00:01 juliett /usr/sbin/cron[16252]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 11:00:04 juliett kernel: [6919394.656445] kjournald starting.  Commit interval 15 seconds
Mar  1 11:00:04 juliett kernel: [6919394.657398] EXT3 FS on sdc3, internal journal
Mar  1 11:00:04 juliett kernel: [6919394.657426] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 11:20:07 juliett rsyslogd: -- MARK --
Mar  1 11:28:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 150 to 153
Mar  1 11:40:07 juliett rsyslogd: -- MARK --
Mar  1 12:00:01 juliett /usr/sbin/cron[16668]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 12:00:04 juliett kernel: [6922995.187835] kjournald starting.  Commit interval 15 seconds
Mar  1 12:00:04 juliett kernel: [6922995.188150] EXT3 FS on sdc3, internal journal
Mar  1 12:00:04 juliett kernel: [6922995.188176] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 12:05:01 juliett /usr/sbin/cron[16781]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 12:20:07 juliett rsyslogd: -- MARK --
Mar  1 12:40:07 juliett rsyslogd: -- MARK --
Mar  1 13:00:01 juliett /usr/sbin/cron[17115]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 13:00:05 juliett kernel: [6926595.551779] kjournald starting.  Commit interval 15 seconds
Mar  1 13:00:05 juliett kernel: [6926595.551988] EXT3 FS on sdc3, internal journal
Mar  1 13:00:05 juliett kernel: [6926595.552145] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 13:20:08 juliett rsyslogd: -- MARK --
Mar  1 13:28:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Mar  1 13:40:08 juliett rsyslogd: -- MARK --
Mar  1 13:58:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 153
Mar  1 14:00:01 juliett /usr/sbin/cron[17556]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 14:00:04 juliett kernel: [6930194.964133] kjournald starting.  Commit interval 15 seconds
Mar  1 14:00:04 juliett kernel: [6930194.965600] EXT3 FS on sdc3, internal journal
Mar  1 14:00:04 juliett kernel: [6930194.965628] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 14:20:08 juliett rsyslogd: -- MARK --
Mar  1 14:40:08 juliett rsyslogd: -- MARK --
Mar  1 15:00:01 juliett /usr/sbin/cron[17987]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 15:00:05 juliett kernel: [6933795.587144] kjournald starting.  Commit interval 15 seconds
Mar  1 15:00:05 juliett kernel: [6933795.588388] EXT3 FS on sdc3, internal journal
Mar  1 15:00:05 juliett kernel: [6933795.588415] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 15:20:08 juliett rsyslogd: -- MARK --
Mar  1 15:40:08 juliett rsyslogd: -- MARK --
Mar  1 16:00:01 juliett /usr/sbin/cron[18446]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 16:00:04 juliett kernel: [6937394.694826] kjournald starting.  Commit interval 15 seconds
Mar  1 16:00:04 juliett kernel: [6937394.695355] EXT3 FS on sdc3, internal journal
Mar  1 16:00:04 juliett kernel: [6937394.695382] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 16:20:08 juliett rsyslogd: -- MARK --
Mar  1 16:40:09 juliett rsyslogd: -- MARK --
Mar  1 17:00:01 juliett /usr/sbin/cron[18873]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  1 17:00:04 juliett kernel: [6940994.785333] kjournald starting.  Commit interval 15 seconds
Mar  1 17:00:04 juliett kernel: [6940994.786256] EXT3 FS on sdc3, internal journal
Mar  1 17:00:04 juliett kernel: [6940994.786284] EXT3-fs: mounted filesystem with ordered data mode.
Mar  1 17:20:09 juliett rsyslogd: -- MARK --
Mar  1 17:40:09 juliett rsyslogd: -- MARK --
Mar  1 18:00:09 juliett rsyslogd: -- MARK --
Mar  1 22:00:01 juliett /usr/sbin/cron[20648]: (root) CMD ( /usr/local/bin/ftplicity backup)
Mar  1 22:20:10 juliett rsyslogd: -- MARK --
Mar  1 22:40:10 juliett rsyslogd: -- MARK --
Mar  1 23:00:10 juliett rsyslogd: -- MARK --
Mar  2 00:58:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Mar  2 01:20:11 juliett rsyslogd: -- MARK --
Mar  2 01:40:11 juliett rsyslogd: -- MARK --
Mar  2 02:00:11 juliett rsyslogd: -- MARK --
Mar  2 02:20:11 juliett rsyslogd: -- MARK --
Mar  2 09:00:01 juliett /usr/sbin/cron[24563]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 09:00:02 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] rsyslogd was HUPed,               type 'restart'.
Mar  2 09:00:02 juliett kernel: Kernel logging (proc) stopped.
Mar  2 09:00:02 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 09:00:02 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] (re)start
Mar  2 09:00:04 juliett kernel: [6998595.421355] kjournald starting.  Commit interval 15 seconds
Mar  2 09:00:04 juliett kernel: [6998595.421580] EXT3 FS on sdc3, internal journal
Mar  2 09:00:04 juliett kernel: [6998595.421606] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 09:00:08 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] rsyslogd was HUPed,               type 'restart'.
Mar  2 09:00:08 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 09:00:08 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1947" x-info="http://www.rsyslog.com"] (re)start
Mar  2 09:20:08 juliett rsyslogd: -- MARK --
Mar  2 09:40:08 juliett rsyslogd: -- MARK --
Mar  2 09:58:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Mar  2 10:00:01 juliett /usr/sbin/cron[25104]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 10:00:04 juliett kernel: [7002195.376839] kjournald starting.  Commit interval 15 seconds
Mar  2 10:00:04 juliett kernel: [7002195.377778] EXT3 FS on sdc3, internal journal
Mar  2 10:00:04 juliett kernel: [7002195.377805] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 10:20:08 juliett rsyslogd: -- MARK --
Mar  2 10:40:08 juliett rsyslogd: -- MARK --
Mar  2 11:00:01 juliett /usr/sbin/cron[25556]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 11:00:04 juliett kernel: [7005794.781853] kjournald starting.  Commit interval 15 seconds
Mar  2 11:00:04 juliett kernel: [7005794.782174] EXT3 FS on sdc3, internal journal
Mar  2 11:00:04 juliett kernel: [7005794.782201] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 11:20:08 juliett rsyslogd: -- MARK --
Mar  2 11:28:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 123 to 125
Mar  2 11:28:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 153
Mar  2 11:40:08 juliett rsyslogd: -- MARK --
Mar  2 12:00:01 juliett /usr/sbin/cron[26041]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 12:00:05 juliett kernel: [7009395.561993] kjournald starting.  Commit interval 15 seconds
Mar  2 12:00:05 juliett kernel: [7009395.562937] EXT3 FS on sdc3, internal journal
Mar  2 12:00:05 juliett kernel: [7009395.562964] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 12:05:01 juliett /usr/sbin/cron[26148]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 12:20:08 juliett rsyslogd: -- MARK --
Mar  2 12:28:02 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 150
Mar  2 12:40:09 juliett rsyslogd: -- MARK --
Mar  2 12:58:01 juliett smartd[2550]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 150 to 153
Mar  2 13:00:01 juliett /usr/sbin/cron[26530]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 13:00:04 juliett kernel: [7012995.201572] kjournald starting.  Commit interval 15 seconds
Mar  2 13:00:04 juliett kernel: [7012995.202500] EXT3 FS on sdc3, internal journal
Mar  2 13:00:04 juliett kernel: [7012995.202527] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 15:16:38 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:16:38 juliett kernel: [   12.540096] fuse init (API version 7.12)
Mar  2 15:16:38 juliett kernel: [   13.465569] type=1505 audit(1330697797.766:2): operation="profile_load" pid=1101 name=/bin/ping
Mar  2 15:16:38 juliett kernel: [   13.504872] type=1505 audit(1330697797.805:3): operation="profile_load" pid=1102 name=/sbin/klogd
Mar  2 15:16:38 juliett kernel: [   13.546450] type=1505 audit(1330697797.847:4): operation="profile_load" pid=1103 name=/sbin/syslog-ng
Mar  2 15:16:38 juliett kernel: [   13.589895] type=1505 audit(1330697797.890:5): operation="profile_load" pid=1104 name=/sbin/syslogd
Mar  2 15:16:38 juliett kernel: [   13.633902] type=1505 audit(1330697797.934:6): operation="profile_load" pid=1105 name=/usr/sbin/avahi-daemon
Mar  2 15:16:38 juliett kernel: [   13.672341] type=1505 audit(1330697797.973:7): operation="profile_load" pid=1106 name=/usr/sbin/identd
Mar  2 15:16:38 juliett kernel: [   13.712666] type=1505 audit(1330697798.013:8): operation="profile_load" pid=1107 name=/usr/sbin/mdnsd
Mar  2 15:16:38 juliett kernel: [   13.765173] type=1505 audit(1330697798.066:9): operation="profile_load" pid=1108 name=/usr/sbin/nscd
Mar  2 15:16:38 juliett kernel: [   13.827016] type=1505 audit(1330697798.127:10): operation="profile_load" pid=1109 name=/usr/sbin/ntpd
Mar  2 15:16:38 juliett kernel: [   13.866893] type=1505 audit(1330697798.167:11): operation="profile_load" pid=1110 name=/usr/sbin/traceroute
Mar  2 15:16:38 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1186" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:16:39 juliett kernel: [   14.731829] powernow-k8: Found 1 AMD Athlon(tm) II X2 215 Processor processors (2 cpu cores) (version 2.20.00)
Mar  2 15:16:39 juliett kernel: [   14.731878] powernow-k8:    0 : pstate 0 (2700 MHz)
Mar  2 15:16:39 juliett kernel: [   14.731881] powernow-k8:    1 : pstate 1 (2100 MHz)
Mar  2 15:16:39 juliett kernel: [   14.731884] powernow-k8:    2 : pstate 2 (1500 MHz)
Mar  2 15:16:39 juliett kernel: [   14.731887] powernow-k8:    3 : pstate 3 (800 MHz)
Mar  2 15:16:39 juliett ifup:     lo
Mar  2 15:16:39 juliett ifup:     lo
Mar  2 15:16:39 juliett ifup: IP address: 127.0.0.1/8
Mar  2 15:16:39 juliett ifup:
Mar  2 15:16:39 juliett ifup:
Mar  2 15:16:39 juliett ifup: IP address: 127.0.0.2/8
Mar  2 15:16:39 juliett ifup:
Mar  2 15:16:40 juliett ifup:     eth0      device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03              )
Mar  2 15:16:40 juliett kernel: [   16.048921] r8169: eth0: link up
Mar  2 15:16:40 juliett kernel: [   16.048931] r8169: eth0: link up
Mar  2 15:16:40 juliett ifup:     eth0
Mar  2 15:16:40 juliett ifup: IP address: 192.168.2.100/24
Mar  2 15:16:40 juliett ifup:
Mar  2 15:16:40 juliett ifup-route: Error while executing:
Mar  2 15:16:40 juliett ifup-route:    Command 'ip route replace to 192.168.2.1/24 via 192.168.2.100 dev eth0' returned:
Mar  2 15:16:40 juliett ifup-route:   RTNETLINK answers: Invalid argument
Mar  2 15:16:40 juliett ifup-route:    Configuration line: 192.168.2.1 192.168.2.100 255.255.255.0 eth0
Mar  2 15:16:41 juliett ifup:     eth1      device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Mar  2 15:16:41 juliett kernel: [   17.278793] r8169: eth1: link down
Mar  2 15:16:41 juliett kernel: [   17.279717] ADDRCONF(NETDEV_UP): eth1: link is not ready
Mar  2 15:16:41 juliett ifup:     eth1
Mar  2 15:16:41 juliett ifup: IP address: 192.168.1.100/24
Mar  2 15:16:41 juliett ifup:
Mar  2 15:16:42 juliett kernel: Kernel logging (proc) stopped.
Mar  2 15:16:42 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:16:42 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1905" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:16:42 juliett auditd[1959]: Audit daemon has no space left on logging partition
Mar  2 15:16:42 juliett auditd[1959]: Audit daemon is suspending logging due to no space left on logging partition.
Mar  2 15:16:42 juliett auditd[1959]: Started dispatcher: /sbin/audispd pid: 1961
Mar  2 15:16:42 juliett audispd: priority_boost_parser called with: 4
Mar  2 15:16:42 juliett audispd: max_restarts_parser called with: 10
Mar  2 15:16:42 juliett auditd[1959]: Init complete, auditd 1.7.13 listening for events (startup state disable)
Mar  2 15:16:42 juliett audispd: af_unix plugin initialized
Mar  2 15:16:42 juliett audispd: audispd initialized with q_depth=80 and 1 active plugins
Mar  2 15:16:44 juliett kernel: [   19.960664] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Mar  2 15:16:45 juliett smartd[2206]: smartd 5.39 2009-08-08 r2872~ [x86_64-unknown-linux-gnu] (openSUSE RPM)#012Copyright (C) 2002-9 by Bruce Al              len, http://smartmontools.sourceforge.net#012
Mar  2 15:16:45 juliett smartd[2206]: Opened configuration file /etc/smartd.conf
Mar  2 15:16:45 juliett smartd[2206]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Mar  2 15:16:45 juliett smartd[2206]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Mar  2 15:16:45 juliett sshd[2354]: Server listening on 0.0.0.0 port 52128.
Mar  2 15:16:45 juliett sshd[2354]: Server listening on :: port 52128.
Mar  2 15:16:45 juliett smartd[2206]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Mar  2 15:16:45 juliett smartd[2206]: Device: /dev/sda [SAT], opened
Mar  2 15:16:45 juliett smartd[2206]: Device: /dev/sda [SAT], not found in smartd database.
Mar  2 15:16:46 juliett smartd[2206]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:16:46 juliett smartd[2206]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.st              ate
Mar  2 15:16:46 juliett smartd[2206]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Mar  2 15:16:46 juliett smartd[2206]: Device: /dev/sdb [SAT], opened
Mar  2 15:16:46 juliett smartd[2206]: Device: /dev/sdb [SAT], not found in smartd database.
Mar  2 15:16:48 juliett smartd[2206]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:16:48 juliett smartd[2206]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.st              ate
Mar  2 15:16:48 juliett smartd[2206]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Mar  2 15:16:48 juliett smartd[2206]: Device: /dev/sdc [SAT], opened
Mar  2 15:16:48 juliett smartd[2206]: Device: /dev/sdc [SAT], found in smartd database.
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3WN              K.ata.state
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdd, opened
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdd, does not support SMART Self-Test Log.
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
Mar  2 15:16:49 juliett smartd[2206]: Device: /dev/sdd, persistence not yet supported for SCSI; ignoring -s option.
Mar  2 15:16:49 juliett smartd[2206]: Monitoring 3 ATA and 1 SCSI devices
Mar  2 15:16:51 juliett smartd[2206]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Mar  2 15:16:52 juliett smartd[2206]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.s              tate
Mar  2 15:16:52 juliett smartd[2206]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.s              tate
Mar  2 15:16:52 juliett smartd[2206]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3W              NK.ata.state
Mar  2 15:16:52 juliett smartd[2526]: smartd has fork()ed into background mode. New PID=2526.
Mar  2 15:16:52 juliett ntpd[2547]: ntpd 4.2.4p8@1.1612-o Tue Dec 15 14:06:22 UTC 2009 (1)
Mar  2 15:16:52 juliett ntpd[2554]: precision = 1.000 usec
Mar  2 15:16:52 juliett ntpd[2554]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #1 wildcard, ::#123 Disabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #2 lo, ::1#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #3 eth0, fe80::4a5b:39ff:feb6:5dd#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #5 lo, 127.0.0.2#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #6 eth0, 192.168.2.100#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: Listening on interface #7 eth1, 192.168.1.100#123 Enabled
Mar  2 15:16:52 juliett ntpd[2554]: kernel time sync status 2040
Mar  2 15:16:52 juliett ntpd[2554]: Frequency format error in /var/lib/ntp/drift/ntp.drift
Mar  2 15:16:52 juliett /usr/sbin/cron[2567]: (CRON) STARTUP (V5.0)
Mar  2 15:16:52 juliett kernel: [   28.431299] tun: Universal TUN/TAP device driver, 1.6
Mar  2 15:16:52 juliett kernel: [   28.431314] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar  2 15:16:53 juliett kernel: [   28.806596] tun0: Disabled Privacy Extensions
Mar  2 13:23:28 juliett kernel: [  424.803069] possible SYN flooding on port 139. Sending cookies.
Mar  2 13:23:31 juliett kernel: [  427.704481] JBD: barrier-based sync failed on md1:8 - disabling barriers
Mar  2 13:25:13 juliett kernel: [  529.415122] possible SYN flooding on port 139. Sending cookies.
Mar  2 13:25:36 juliett pm-profiler: Power Button pressed, executing /sbin/shutdown -h now
Mar  2 13:25:36 juliett shutdown[2993]: shutting down for system halt
Mar  2 13:25:37 juliett init: Switching to runlevel: 0
Mar  2 13:25:38 juliett smartd[2526]: smartd received signal 15: Terminated
Mar  2 13:25:38 juliett smartd[2526]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.s              tate
Mar  2 13:25:38 juliett smartd[2526]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.s              tate
Mar  2 13:25:38 juliett smartd[2526]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3W              NK.ata.state
Mar  2 13:25:38 juliett smartd[2526]: smartd is exiting (exit status 0)
Mar  2 13:25:39 juliett sshd[2354]: Received signal 15; terminating.
Mar  2 13:25:39 juliett auditd[1959]: Error sending signal_info request (Operation not supported)
Mar  2 13:25:39 juliett auditd[1959]: The audit daemon is exiting.
Mar  2 13:25:39 juliett rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Mar  2 13:25:39 juliett kernel: Kernel logging (proc) stopped.
Mar  2 15:47:03 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:47:03 juliett kernel: [   11.213230] type=1505 audit(1330699622.517:2): operation="profile_load" pid=1054 name=/bin/ping
Mar  2 15:47:03 juliett kernel: [   11.251845] type=1505 audit(1330699622.555:3): operation="profile_load" pid=1055 name=/sbin/klogd
Mar  2 15:47:03 juliett kernel: [   11.293722] type=1505 audit(1330699622.597:4): operation="profile_load" pid=1056 name=/sbin/syslog-ng
Mar  2 15:47:03 juliett kernel: [   11.337200] type=1505 audit(1330699622.641:5): operation="profile_load" pid=1057 name=/sbin/syslogd
Mar  2 15:47:03 juliett kernel: [   11.381756] type=1505 audit(1330699622.685:6): operation="profile_load" pid=1058 name=/usr/sbin/avahi-daemon
Mar  2 15:47:03 juliett kernel: [   11.420299] type=1505 audit(1330699622.724:7): operation="profile_load" pid=1059 name=/usr/sbin/identd
Mar  2 15:47:03 juliett kernel: [   11.461541] type=1505 audit(1330699622.765:8): operation="profile_load" pid=1060 name=/usr/sbin/mdnsd
Mar  2 15:47:03 juliett kernel: [   11.534785] type=1505 audit(1330699622.838:9): operation="profile_load" pid=1079 name=/usr/sbin/nscd
Mar  2 15:47:03 juliett kernel: [   11.597918] type=1505 audit(1330699622.901:10): operation="profile_load" pid=1080 name=/usr/sbin/ntpd
Mar  2 15:47:03 juliett kernel: [   11.636419] type=1505 audit(1330699622.940:11): operation="profile_load" pid=1081 name=/usr/sbin/traceroute
Mar  2 15:47:03 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1158" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:47:04 juliett kernel: [   12.832054] powernow-k8: Found 1 AMD Athlon(tm) II X2 215 Processor processors (2 cpu cores) (version 2.20.00)
Mar  2 15:47:04 juliett kernel: [   12.832109] powernow-k8:    0 : pstate 0 (2700 MHz)
Mar  2 15:47:04 juliett kernel: [   12.832113] powernow-k8:    1 : pstate 1 (2100 MHz)
Mar  2 15:47:04 juliett kernel: [   12.832116] powernow-k8:    2 : pstate 2 (1500 MHz)
Mar  2 15:47:04 juliett kernel: [   12.832119] powernow-k8:    3 : pstate 3 (800 MHz)
Mar  2 15:47:04 juliett ifup:     lo
Mar  2 15:47:04 juliett ifup:     lo
Mar  2 15:47:04 juliett ifup: IP address: 127.0.0.1/8
Mar  2 15:47:04 juliett ifup:
Mar  2 15:47:04 juliett ifup:
Mar  2 15:47:04 juliett ifup: IP address: 127.0.0.2/8
Mar  2 15:47:04 juliett ifup:
Mar  2 15:47:04 juliett ifup:     eth0      device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03              )
Mar  2 15:47:05 juliett ifup:     eth0
Mar  2 15:47:05 juliett ifup: IP address: 192.168.2.100/24
Mar  2 15:47:05 juliett ifup:
Mar  2 15:47:05 juliett kernel: [   13.703691] r8169: eth0: link up
Mar  2 15:47:05 juliett kernel: [   13.703716] r8169: eth0: link up
Mar  2 15:47:05 juliett ifup-route: Error while executing:
Mar  2 15:47:05 juliett ifup-route:    Command 'ip route replace to 192.168.2.1/24 via 192.168.2.100 dev eth0' returned:
Mar  2 15:47:05 juliett ifup-route:   RTNETLINK answers: Invalid argument
Mar  2 15:47:05 juliett ifup-route:    Configuration line: 192.168.2.1 192.168.2.100 255.255.255.0 eth0
Mar  2 15:47:06 juliett ifup:     eth1      device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Mar  2 15:47:06 juliett kernel: [   15.094404] r8169: eth1: link down
Mar  2 15:47:06 juliett kernel: [   15.094833] ADDRCONF(NETDEV_UP): eth1: link is not ready
Mar  2 15:47:06 juliett ifup:     eth1
Mar  2 15:47:06 juliett ifup: IP address: 192.168.1.100/24
Mar  2 15:47:06 juliett ifup:
Mar  2 15:47:06 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:47:06 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1877" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:47:07 juliett auditd[1892]: Audit daemon has no space left on logging partition
Mar  2 15:47:07 juliett auditd[1892]: Audit daemon is suspending logging due to no space left on logging partition.
Mar  2 15:47:07 juliett auditd[1892]: Started dispatcher: /sbin/audispd pid: 1894
Mar  2 15:47:07 juliett audispd: priority_boost_parser called with: 4
Mar  2 15:47:07 juliett audispd: max_restarts_parser called with: 10
Mar  2 15:47:07 juliett audispd: af_unix plugin initialized
Mar  2 15:47:07 juliett audispd: audispd initialized with q_depth=80 and 1 active plugins
Mar  2 15:47:07 juliett auditd[1892]: Init complete, auditd 1.7.13 listening for events (startup state disable)
Mar  2 15:47:09 juliett kernel: [   18.006848] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Mar  2 15:47:10 juliett smartd[2194]: smartd 5.39 2009-08-08 r2872~ [x86_64-unknown-linux-gnu] (openSUSE RPM)#012Copyright (C) 2002-9 by Bruce Al              len, http://smartmontools.sourceforge.net#012
Mar  2 15:47:10 juliett smartd[2194]: Opened configuration file /etc/smartd.conf
Mar  2 15:47:10 juliett smartd[2194]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Mar  2 15:47:10 juliett smartd[2194]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Mar  2 15:47:10 juliett smartd[2194]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Mar  2 15:47:10 juliett smartd[2194]: Device: /dev/sda [SAT], opened
Mar  2 15:47:10 juliett smartd[2194]: Device: /dev/sda [SAT], not found in smartd database.
Mar  2 15:47:10 juliett sshd[2340]: Server listening on 0.0.0.0 port 52128.
Mar  2 15:47:10 juliett sshd[2340]: Server listening on :: port 52128.
Mar  2 15:47:11 juliett smartd[2194]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:47:11 juliett smartd[2194]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.st              ate
Mar  2 15:47:12 juliett smartd[2194]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Mar  2 15:47:12 juliett smartd[2194]: Device: /dev/sdb [SAT], opened
Mar  2 15:47:12 juliett smartd[2194]: Device: /dev/sdb [SAT], not found in smartd database.
Mar  2 15:47:13 juliett smartd[2194]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:47:13 juliett smartd[2194]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.st              ate
Mar  2 15:47:13 juliett smartd[2194]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Mar  2 15:47:13 juliett smartd[2194]: Device: /dev/sdc [SAT], opened
Mar  2 15:47:13 juliett smartd[2194]: Device: /dev/sdc [SAT], found in smartd database.
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3WN              K.ata.state
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdd, opened
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdd, does not support SMART Self-Test Log.
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sdd, persistence not yet supported for SCSI; ignoring -s option.
Mar  2 15:47:15 juliett smartd[2194]: Monitoring 3 ATA and 1 SCSI devices
Mar  2 15:47:15 juliett smartd[2194]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 3 Spin_Up_Time changed from 58 to 75
Mar  2 15:47:17 juliett smartd[2194]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 3 Spin_Up_Time changed from 74 to 75
Mar  2 15:47:17 juliett smartd[2194]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 181
Mar  2 15:47:18 juliett smartd[2194]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.s              tate
Mar  2 15:47:18 juliett smartd[2194]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.s              tate
Mar  2 15:47:18 juliett smartd[2194]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3W              NK.ata.state
Mar  2 15:47:18 juliett smartd[2486]: smartd has fork()ed into background mode. New PID=2486.
Mar  2 15:47:18 juliett ntpd[2516]: ntpd 4.2.4p8@1.1612-o Tue Dec 15 14:06:22 UTC 2009 (1)
Mar  2 15:47:18 juliett ntpd[2517]: precision = 1.000 usec
Mar  2 15:47:18 juliett ntpd[2517]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #1 wildcard, ::#123 Disabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #2 lo, ::1#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #3 eth0, fe80::4a5b:39ff:feb6:5dd#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #5 lo, 127.0.0.2#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #6 eth0, 192.168.2.100#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: Listening on interface #7 eth1, 192.168.1.100#123 Enabled
Mar  2 15:47:18 juliett ntpd[2517]: kernel time sync status 2040
Mar  2 15:47:18 juliett ntpd[2517]: Frequency format error in /var/lib/ntp/drift/ntp.drift
Mar  2 15:47:18 juliett kernel: [   27.217722] tun: Universal TUN/TAP device driver, 1.6
Mar  2 15:47:18 juliett kernel: [   27.217738] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar  2 15:47:18 juliett /usr/sbin/cron[2540]: (CRON) STARTUP (V5.0)
Mar  2 15:47:18 juliett kernel: [   27.488659] tun0: Disabled Privacy Extensions
Mar  2 13:48:24 juliett kernel: [   93.425655] usb 1-2: USB disconnect, address 2
Mar  2 13:48:46 juliett kernel: [  115.822093] usb 1-2: new high speed USB device using ehci_hcd and address 3
Mar  2 13:48:46 juliett kernel: [  115.940608] usb 1-2: New USB device found, idVendor=1bcf, idProduct=0c31
Mar  2 13:48:46 juliett kernel: [  115.940626] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Mar  2 13:48:46 juliett kernel: [  115.940640] usb 1-2: Product: USB to Serial-ATA bridge
Mar  2 13:48:46 juliett kernel: [  115.940651] usb 1-2: Manufacturer: Sunplus Innovation Technology.
Mar  2 13:48:46 juliett kernel: [  115.940661] usb 1-2: SerialNumber: FDC0FD10EA00000FD0FCAF5A270144
Mar  2 13:48:46 juliett kernel: [  115.940879] usb 1-2: configuration #1 chosen from 1 choice
Mar  2 13:48:46 juliett kernel: [  115.953643] scsi7 : SCSI emulation for USB Mass Storage devices
Mar  2 13:48:46 juliett kernel: [  115.955383] usb-storage: device found at 3
Mar  2 13:48:46 juliett kernel: [  115.955390] usb-storage: waiting for device to settle before scanning
Mar  2 13:48:47 juliett kernel: [  116.960484] scsi 7:0:0:0: Direct-Access     WDC WD10 EARS-00Y5B1           PQ: 0 ANSI: 4
Mar  2 13:48:47 juliett kernel: [  116.962134] sd 7:0:0:0: Attached scsi generic sg3 type 0
Mar  2 13:48:47 juliett kernel: [  116.962930] usb-storage: device scan complete
Mar  2 13:48:47 juliett kernel: [  116.968829] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Mar  2 13:48:47 juliett kernel: [  116.975214] sd 7:0:0:0: [sdd] Write Protect is off
Mar  2 13:48:47 juliett kernel: [  116.975231] sd 7:0:0:0: [sdd] Mode Sense: 38 00 00 00
Mar  2 13:48:47 juliett kernel: [  116.975239] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 13:48:47 juliett kernel: [  116.983114] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 13:48:47 juliett kernel: [  116.983140]  sdd: sdd1
Mar  2 13:48:47 juliett kernel: [  117.014732] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 13:48:47 juliett kernel: [  117.014756] sd 7:0:0:0: [sdd] Attached SCSI disk
Mar  2 15:53:43 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:53:43 juliett kernel: [    9.353314] fuse init (API version 7.12)
Mar  2 15:53:43 juliett kernel: [   10.268377] type=1505 audit(1330700022.513:2): operation="profile_load" pid=1123 name=/bin/ping
Mar  2 15:53:43 juliett kernel: [   10.307103] type=1505 audit(1330700022.551:3): operation="profile_load" pid=1124 name=/sbin/klogd
Mar  2 15:53:43 juliett kernel: [   10.348732] type=1505 audit(1330700022.593:4): operation="profile_load" pid=1125 name=/sbin/syslog-ng
Mar  2 15:53:43 juliett kernel: [   10.392307] type=1505 audit(1330700022.637:5): operation="profile_load" pid=1126 name=/sbin/syslogd
Mar  2 15:53:43 juliett kernel: [   10.440832] type=1505 audit(1330700022.685:6): operation="profile_load" pid=1127 name=/usr/sbin/avahi-daemon
Mar  2 15:53:43 juliett kernel: [   10.488278] type=1505 audit(1330700022.733:7): operation="profile_load" pid=1146 name=/usr/sbin/identd
Mar  2 15:53:43 juliett kernel: [   10.528726] type=1505 audit(1330700022.773:8): operation="profile_load" pid=1147 name=/usr/sbin/mdnsd
Mar  2 15:53:43 juliett kernel: [   10.598415] type=1505 audit(1330700022.843:9): operation="profile_load" pid=1148 name=/usr/sbin/nscd
Mar  2 15:53:43 juliett kernel: [   10.691918] type=1505 audit(1330700022.935:10): operation="profile_load" pid=1149 name=/usr/sbin/ntpd
Mar  2 15:53:43 juliett kernel: [   10.730471] type=1505 audit(1330700022.975:11): operation="profile_load" pid=1150 name=/usr/sbin/traceroute
Mar  2 15:53:43 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1226" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:53:43 juliett kernel: [   11.611371] powernow-k8: Found 1 AMD Athlon(tm) II X2 215 Processor processors (2 cpu cores) (version 2.20.00)
Mar  2 15:53:43 juliett kernel: [   11.611419] powernow-k8:    0 : pstate 0 (2700 MHz)
Mar  2 15:53:43 juliett kernel: [   11.611422] powernow-k8:    1 : pstate 1 (2100 MHz)
Mar  2 15:53:43 juliett kernel: [   11.611425] powernow-k8:    2 : pstate 2 (1500 MHz)
Mar  2 15:53:43 juliett kernel: [   11.611428] powernow-k8:    3 : pstate 3 (800 MHz)
Mar  2 15:53:45 juliett ifup:     lo
Mar  2 15:53:45 juliett ifup:     lo
Mar  2 15:53:45 juliett ifup: IP address: 127.0.0.1/8
Mar  2 15:53:45 juliett ifup:
Mar  2 15:53:45 juliett ifup:
Mar  2 15:53:45 juliett ifup: IP address: 127.0.0.2/8
Mar  2 15:53:45 juliett ifup:
Mar  2 15:53:45 juliett ifup:     eth0      device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03              )
Mar  2 15:53:45 juliett kernel: [   13.522400] r8169: eth0: link up
Mar  2 15:53:45 juliett kernel: [   13.522415] r8169: eth0: link up
Mar  2 15:53:45 juliett ifup:     eth0
Mar  2 15:53:45 juliett ifup: IP address: 192.168.2.100/24
Mar  2 15:53:45 juliett ifup:
Mar  2 15:53:45 juliett ifup-route: Error while executing:
Mar  2 15:53:45 juliett ifup-route:    Command 'ip route replace to 192.168.2.1/24 via 192.168.2.100 dev eth0' returned:
Mar  2 15:53:45 juliett ifup-route:   RTNETLINK answers: Invalid argument
Mar  2 15:53:45 juliett ifup-route:    Configuration line: 192.168.2.1 192.168.2.100 255.255.255.0 eth0
Mar  2 15:53:46 juliett ifup:     eth1      device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Mar  2 15:53:46 juliett kernel: [   14.747941] r8169: eth1: link down
Mar  2 15:53:46 juliett kernel: [   14.749295] ADDRCONF(NETDEV_UP): eth1: link is not ready
Mar  2 15:53:47 juliett ifup:     eth1
Mar  2 15:53:47 juliett ifup: IP address: 192.168.1.100/24
Mar  2 15:53:47 juliett ifup:
Mar  2 15:53:47 juliett kernel: Kernel logging (proc) stopped.
Mar  2 15:53:47 juliett kernel: imklog 4.4.1, log source = /proc/kmsg started.
Mar  2 15:53:47 juliett rsyslogd: [origin software="rsyslogd" swVersion="4.4.1" x-pid="1946" x-info="http://www.rsyslog.com"] (re)start
Mar  2 15:53:47 juliett auditd[1961]: Audit daemon has no space left on logging partition
Mar  2 15:53:47 juliett auditd[1961]: Audit daemon is suspending logging due to no space left on logging partition.
Mar  2 15:53:47 juliett auditd[1961]: Started dispatcher: /sbin/audispd pid: 1963
Mar  2 15:53:47 juliett audispd: priority_boost_parser called with: 4
Mar  2 15:53:47 juliett audispd: max_restarts_parser called with: 10
Mar  2 15:53:47 juliett audispd: af_unix plugin initialized
Mar  2 15:53:47 juliett audispd: audispd initialized with q_depth=80 and 1 active plugins
Mar  2 15:53:47 juliett auditd[1961]: Init complete, auditd 1.7.13 listening for events (startup state disable)
Mar  2 15:53:49 juliett kernel: [   17.446735] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Mar  2 15:53:50 juliett smartd[2245]: smartd 5.39 2009-08-08 r2872~ [x86_64-unknown-linux-gnu] (openSUSE RPM)#012Copyright (C) 2002-9 by Bruce Al              len, http://smartmontools.sourceforge.net#012
Mar  2 15:53:50 juliett smartd[2245]: Opened configuration file /etc/smartd.conf
Mar  2 15:53:50 juliett smartd[2245]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Mar  2 15:53:50 juliett smartd[2245]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Mar  2 15:53:50 juliett sshd[2387]: Server listening on 0.0.0.0 port 52128.
Mar  2 15:53:50 juliett sshd[2387]: Server listening on :: port 52128.
Mar  2 15:53:50 juliett smartd[2245]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Mar  2 15:53:50 juliett smartd[2245]: Device: /dev/sda [SAT], opened
Mar  2 15:53:50 juliett smartd[2245]: Device: /dev/sda [SAT], not found in smartd database.
Mar  2 15:53:52 juliett smartd[2245]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:53:52 juliett smartd[2245]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.st              ate
Mar  2 15:53:52 juliett smartd[2245]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Mar  2 15:53:52 juliett smartd[2245]: Device: /dev/sdb [SAT], opened
Mar  2 15:53:52 juliett smartd[2245]: Device: /dev/sdb [SAT], not found in smartd database.
Mar  2 15:53:54 juliett smartd[2245]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:53:54 juliett smartd[2245]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.st              ate
Mar  2 15:53:54 juliett smartd[2245]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Mar  2 15:53:54 juliett smartd[2245]: Device: /dev/sdc [SAT], opened
Mar  2 15:53:54 juliett smartd[2245]: Device: /dev/sdc [SAT], found in smartd database.
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3WN              K.ata.state
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdd, opened
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdd, does not support SMART Self-Test Log.
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
Mar  2 15:53:55 juliett smartd[2245]: Device: /dev/sdd, persistence not yet supported for SCSI; ignoring -s option.
Mar  2 15:53:55 juliett smartd[2245]: Monitoring 3 ATA and 1 SCSI devices
Mar  2 15:53:57 juliett smartd[2245]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 176
Mar  2 15:53:58 juliett smartd[2245]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500070.ata.s              tate
Mar  2 15:53:58 juliett smartd[2245]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.SAMSUNG_HD105SI-S25GJ9FZ500068.ata.s              tate
Mar  2 15:53:58 juliett smartd[2245]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDT721010SLA360-STF607MS1H3W              NK.ata.state
Mar  2 15:53:58 juliett smartd[2554]: smartd has fork()ed into background mode. New PID=2554.
Mar  2 15:53:58 juliett ntpd[2586]: ntpd 4.2.4p8@1.1612-o Tue Dec 15 14:06:22 UTC 2009 (1)
Mar  2 15:53:58 juliett ntpd[2587]: precision = 1.000 usec
Mar  2 15:53:58 juliett ntpd[2587]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #1 wildcard, ::#123 Disabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #2 lo, ::1#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #3 eth0, fe80::4a5b:39ff:feb6:5dd#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #5 lo, 127.0.0.2#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #6 eth0, 192.168.2.100#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: Listening on interface #7 eth1, 192.168.1.100#123 Enabled
Mar  2 15:53:58 juliett ntpd[2587]: kernel time sync status 2040
Mar  2 15:53:58 juliett ntpd[2587]: Frequency format error in /var/lib/ntp/drift/ntp.drift
Mar  2 15:53:58 juliett /usr/sbin/cron[2601]: (CRON) STARTUP (V5.0)
Mar  2 15:53:58 juliett kernel: [   26.502830] tun: Universal TUN/TAP device driver, 1.6
Mar  2 15:53:58 juliett kernel: [   26.502845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar  2 15:53:59 juliett kernel: [   26.786656] tun0: Disabled Privacy Extensions
Mar  2 13:54:28 juliett kernel: [   57.458040] possible SYN flooding on port 139. Sending cookies.
Mar  2 13:55:42 juliett kernel: [  131.534845] possible SYN flooding on port 139. Sending cookies.
Mar  2 14:00:02 juliett /usr/sbin/cron[3323]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 14:00:05 juliett kernel: [  393.797564] kjournald starting.  Commit interval 15 seconds
Mar  2 14:00:05 juliett kernel: [  393.799074] EXT3 FS on sdc3, internal journal
Mar  2 14:00:05 juliett kernel: [  393.799095] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 14:00:34 juliett kernel: [  422.704500] JBD: barrier-based sync failed on md1:8 - disabling barriers
Mar  2 14:10:05 juliett kernel: [  993.422863] possible SYN flooding on port 139. Sending cookies.
Mar  2 14:23:57 juliett smartd[2554]: System clock time adjusted to the past. Resetting next wakeup time.
Mar  2 14:53:47 juliett rsyslogd: -- MARK --
Mar  2 14:53:58 juliett smartd[2554]: Device: /dev/sda [SAT], SMART Usage Attribute: 191 G-Sense_Error_Rate changed from 252 to 100
Mar  2 14:54:00 juliett smartd[2554]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 2 Throughput_Performance changed from 133 to 125
Mar  2 14:54:00 juliett smartd[2554]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 125 to 123
Mar  2 14:54:00 juliett smartd[2554]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 157
Mar  2 15:00:01 juliett /usr/sbin/cron[3805]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 15:00:04 juliett kernel: [ 3992.893490] kjournald starting.  Commit interval 15 seconds
Mar  2 15:00:04 juliett kernel: [ 3992.894995] EXT3 FS on sdc3, internal journal
Mar  2 15:00:04 juliett kernel: [ 3992.895016] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 15:04:04 juliett kernel: [ 4233.125178] possible SYN flooding on port 139. Sending cookies.
Mar  2 15:33:47 juliett rsyslogd: -- MARK --
Mar  2 16:00:01 juliett /usr/sbin/cron[4348]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 16:00:04 juliett kernel: [ 7593.274462] kjournald starting.  Commit interval 15 seconds
Mar  2 16:00:04 juliett kernel: [ 7593.275196] EXT3 FS on sdc3, internal journal
Mar  2 16:00:04 juliett kernel: [ 7593.275218] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 16:13:47 juliett rsyslogd: -- MARK --
Mar  2 17:00:01 juliett /usr/sbin/cron[4774]: (root) CMD (. /home/scripte/back-daily.sh)
Mar  2 17:00:05 juliett kernel: [11193.413956] kjournald starting.  Commit interval 15 seconds
Mar  2 17:00:05 juliett kernel: [11193.415476] EXT3 FS on sdc3, internal journal
Mar  2 17:00:05 juliett kernel: [11193.415503] EXT3-fs: mounted filesystem with ordered data mode.
Mar  2 17:00:38 juliett vsftpd: Fri Mar  2 17:00:38 2012 [pid 4856] CONNECT: Client "219.94.xxx.xxx"
Mar  2 17:00:38 juliett vsftpd: Fri Mar  2 17:00:38 2012 [pid 4856] FTP response: Client "219.94.xxx.xxx", "220 "Welcome to juliett FTP service.""
Mar  2 17:00:39 juliett vsftpd: Fri Mar  2 17:00:39 2012 [pid 4856] FTP command: Client "219.94.xxx.xxx", "HELP"
Mar  2 17:00:39 juliett vsftpd: Fri Mar  2 17:00:39 2012 [pid 4856] FTP response: Client "219.94.xxx.xxx", "530 Please login with USER and PASS."
Mar  2 17:13:47 juliett rsyslogd: -- MARK --
Mar  2 17:53:47 juliett rsyslogd: -- MARK --
Mar  2 18:01:23 juliett kernel: [14872.093729] usb 1-2: USB disconnect, address 2
Mar  2 18:01:31 juliett kernel: [14879.438096] usb 1-2: new high speed USB device using ehci_hcd and address 3
Mar  2 18:01:31 juliett kernel: [14879.556683] usb 1-2: New USB device found, idVendor=1bcf, idProduct=0c31
Mar  2 18:01:31 juliett kernel: [14879.556707] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Mar  2 18:01:31 juliett kernel: [14879.556726] usb 1-2: Product: USB to Serial-ATA bridge
Mar  2 18:01:31 juliett kernel: [14879.556741] usb 1-2: Manufacturer: Sunplus Innovation Technology.
Mar  2 18:01:31 juliett kernel: [14879.556756] usb 1-2: SerialNumber: FDC0FD10EA00000FD0FCAF5A270144
Mar  2 18:01:31 juliett kernel: [14879.556966] usb 1-2: configuration #1 chosen from 1 choice
Mar  2 18:01:31 juliett kernel: [14879.559655] scsi7 : SCSI emulation for USB Mass Storage devices
Mar  2 18:01:31 juliett kernel: [14879.559887] usb-storage: device found at 3
Mar  2 18:01:31 juliett kernel: [14879.559894] usb-storage: waiting for device to settle before scanning
Mar  2 18:01:32 juliett kernel: [14880.564470] scsi 7:0:0:0: Direct-Access     WDC WD10 EARS-00Y5B1           PQ: 0 ANSI: 4
Mar  2 18:01:32 juliett kernel: [14880.566253] sd 7:0:0:0: Attached scsi generic sg3 type 0
Mar  2 18:01:32 juliett kernel: [14880.567448] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Mar  2 18:01:32 juliett kernel: [14880.574574] sd 7:0:0:0: [sdd] Write Protect is off
Mar  2 18:01:32 juliett kernel: [14880.574584] sd 7:0:0:0: [sdd] Mode Sense: 38 00 00 00
Mar  2 18:01:32 juliett kernel: [14880.574586] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 18:01:32 juliett kernel: [14880.582961] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 18:01:32 juliett kernel: [14880.582973]  sdd: sdd1
Mar  2 18:01:32 juliett kernel: [14880.607122] usb-storage: device scan complete
Mar  2 18:01:32 juliett kernel: [14880.616166] sd 7:0:0:0: [sdd] Assuming drive cache: write through
Mar  2 18:01:32 juliett kernel: [14880.616192] sd 7:0:0:0: [sdd] Attached SCSI disk
Mar  2 18:13:47 juliett rsyslogd: -- MARK --
Mar  2 19:53:48 juliett rsyslogd: -- MARK --
Mar  2 19:53:59 juliett smartd[2554]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Mar  2 20:13:48 juliett rsyslogd: -- MARK --
Mar  2 20:33:48 juliett rsyslogd: -- MARK --

Fällt vielleicht noch etwas auf? Der server ist erst einmal ausgeschaltet, ich möchte nicht, daß alles da eingeäschert wird.
 
framp

framp

Moderator
Teammitglied
gTux schrieb:
Mar 2 17:00:38 juliett vsftpd: Fri Mar 2 17:00:38 2012 [pid 4856] CONNECT: Client "219.94.xxx.xxx"
Mar 2 17:00:38 juliett vsftpd: Fri Mar 2 17:00:38 2012 [pid 4856] FTP response: Client "219.94.xxx.xxx", "220 "Welcome to juliett FTP service.""
Mar 2 17:00:39 juliett vsftpd: Fri Mar 2 17:00:39 2012 [pid 4856] FTP command: Client "219.94.xxx.xxx", "HELP"
Mar 2 17:00:39 juliett vsftpd: Fri Mar 2 17:00:39 2012 [pid 4856] FTP response: Client "219.94.xxx.xxx", "530 Please login with USER and PASS."
Zum Vergrößern anklicken....
Da hat jemand versucht per ftp reinzukommen - es ist ihm aber nicht gelungen. Es wurde auch nicht gross versucht reinzukommen. Sieht mir eher so aus als hätte da jemand eine falsch IP eingegeben ... Allerdings solltest Du trotzdem herausfinden, wieso da jemand so einfach aus dem Internet auf Deinen lokalen LAN Server kommen konnte :???:
 
J

josef-wien

Zur Temperatur: http://www.linux-club.de/viewtopic.php?f=27&t=115335&p=725548&#p725548
Zu den Geräuschen: Schau Dir smartctl -a /dev/sdc an.
 
A

Anonymous

Gast
viele der SMART Attribute musst du dir vorstellen wie ein Punktekonto. Am Anfang sind 255 da. jedes mal wenn die Platte intern diesbezüglich Auffälligkeiten feststellt werden ein paar Punkte abgezogen. irgend wann wird dann nach unten eine festgelegte Schwelle unterschritten (zB 100)
Das soll ein Warnindikator sein für einen eventuellen zukünftigen Ausfall, einige Attribute sind so definiert das sie beim überschreiten dieser Grenze dann einen SMART-Fehler setzen.

Das ganze ist jedoch sehr Herstellerspezifisch und auch Plattentype spezifisch oftmals auch noch Firmware abhängig, dort macht jeder Hersteller mehr oder weniger was er will, eine wirklichen belastbaren einheitlichen Standard gibt es dort wohl weniger. Und eine Platte kann durchaus auch noch ein paar Jahre laufen obwohl sie bei irgend einem nebensächlichen Attribut schon lange keine Punkte mehr hat, und kann auch ausfallen obwohl sie fast überall volle Punktzahl hat.

Wenn die Platte aber schon anfängt zu klappern und zu pfeifen, würde ich mir darüber keine große Gedanken machen und schnellstens Ersatz besorgen und wechseln, Lager kaputt oder trocken und Reibung erzeugt nun mal Wärme, aber trotzdem erstmal prüfen, nicht das es blos ein Lüfter ist der komische Geräusche macht, das würde auch eine höhere Temperatur im Rechner erklären können.

robi
 
OP
G

gTux

Hallo,
ich krieg folgendes raus bei smartctl
Code: 
smartctl -a /dev/sdc
smartctl 5.39 2009-08-08 r2872~ [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K1000.B
Device Model:     Hitachi HDT721010SLA360
Serial Number:    STFxxxxxxxxxxxxx
Firmware Version: ST6OA3AA
User Capacity:    1.000.204.886.016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Mar  4 15:49:20 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (14090) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 235) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   125   125   054    Pre-fail  Offline      -       141
  3 Spin_Up_Time            0x0007   253   253   024    Pre-fail  Always       -       161 (Average 84)
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       4578
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       10
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   123   123   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       18654
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       151
192 Power-Off_Retract_Count 0x0032   096   096   000    Old_age   Always       -       5143
193 Load_Cycle_Count        0x0012   096   096   000    Old_age   Always       -       5143
194 Temperature_Celsius     0x0002   187   187   000    Old_age   Always       -       32 (Lifetime Min/Max 18/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       10
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Scheint ein paar umverteilte Sektoren zu haben. Ist eine 10 noch vertretbar?
 
OP
G

gTux

Die ist so ca. vom 2009.

Ich habe noch ein Problem. Ich kann jetzt auf keine der über SMB freigegebenen Dateien zugreifen. Ich kann sie zwar sehen, aber nicht öffnen. Es kommt bei Windows XP immer eine Fehlermeldung "Der Verzeichnisname ist ungültig". Auch wenn ich eine Datei anklicke. Kann das als Folge der Probleme sein? die samba logs (log.smbd & log.nmbd) zeigen keine Fehler diesbezüglich an. Auch in /var/log/messages ist nix. Die /etc/smb.conf sowie /etc/group Dateien sind seit einem Jahr unverändert. Zumindest wird keine Modifizierung gelistet.

edit
Eventuell hat beides nicht miteinander zu tun - auch wenn der gleiche Zeitpunkt des Auftretens es unwahrscheinlich macht. Ich habe noch ein Thread erstellt.
http://www.linux-club.de/viewtopic.php?f=6&t=115568

und doch noch Fehlermeldungen gefunden - siehe im anderen Thread nach.
 
OP
G

gTux

Das Problem wurde gelöst - siehe link im vorletzten Post. Es war kein Hitzeproblem, das Verzeichnis "/.cache" war vollgelaufen und somit hatte der Server keinen physikalischen Festplattenspeicher mehr.

Big Thx an alle für die Hilfe!
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben