Also bin nun schon viel weiter aber es fehlt wohl noch das letzte Quäntchen, damit mein WLAN endlich läuft...
Habe ndiswrapper korrekt installiert und den net8180.inf Win-XP Treiber eingebunden.
Siehe Shell Ausgaben:
ocalhost:/home/a-double-ya # ndiswrapper -l
Installed ndis drivers:
net8180 present
localhost:/home/a-double-ya # modprobe ndiswrapper
localhost:/home/a-double-ya #
modprobe wurde ausgeführt, ohne eine Fehlermeldung zurückzugeben. Dann sollte der Treiber ja korrekt geladen sein, richtig?
Doch nun gehe ich weiter vor:
Ich rufe die System log mit "dmesg" auf. Daraufhin erscheint folgender, lange Ausgabe:
localhost:/home/a-double-ya # dmesg
Linux version 2.4.21-99-default (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Wed Sep 24 13:30:51 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dd000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
BIOS-e820: 0000000013ff0000 - 0000000013ffec00 (ACPI data)
BIOS-e820: 0000000013ffec00 - 0000000014000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
693MB vmalloc/ioremap area available.
0MB HIGHMEM available.
319MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 81904
zone(0): 4096 pages.
zone(1): 77808 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6ec0
ACPI: RSDT (v001 PTLTD RSDT 01540.08784) @ 0x13ff5c49
ACPI: FADT (v001 IBM TP-X21 01540.08784) @ 0x13ffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.08784) @ 0x13ffebd9
ACPI: DSDT (v001 IBM TP-X21 01540.08784) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda3 vga=0x314 desktop splash=silent
bootsplash: silent mode.
Initializing CPU#0
Detected 597.401 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1179.64 BogoMIPS
Memory: 320172k/327616k available (1590k kernel code, 7056k reserved, 605k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node cdfa1240), AE_AML_NO_RETURN_VALUE
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PSIO] (on)
ACPI: Power Resource [PSER] (off)
ACPI: Embedded Controller [EC] (gpe 9)
schedule_task(): keventd has not started
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
00:00:01[A] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
PISCH: Plug In Scheduler Interface (Version 6)
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 20476
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xf5000000, mapped to 0xd481f000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:57aa
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture... no good signature found.
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (115d,000c,8086,2408)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda
MA, hdb
io
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc
io, hdd
io
hda: IBM-DJSA-220, ATA DISK drive
blk: queue c03bf900, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39070080 sectors (20004 MB) w/1874KiB Cache, CHS=2584/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 > hda3 hda4
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 244k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,3)) ...
for (ide0(3,3))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 514072k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
ds: no socket drivers loaded!
unloading Kernel Card Services
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
ds: no socket drivers loaded!
unloading Kernel Card Services
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:50:22 Sep 24 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
mice: PS/2 mouse device common for all mice
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000820
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8180
PCI: Enabling device 02:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x170-0x177 0x370-0x377
cs: IO port probe 0x0a00-0x0aff: clean.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (35 C)
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
amd64-cpuf: version 1.00.06 - August 13, 2003
amd64-cpuf: Not an AMD processor
powernow: AMD processor not detected.
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
Intel(R) PRO/100 Network Driver - version 2.3.27
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
prism2_init: prism2_cs.o: 0.2.1-pre9 Loaded
prism2_init: dev_info is: prism2_cs
e100: eth0 NIC Link is Up 100 Mbps Full duplex
eth0: no IPv6 routers present
ndiswrapper version 0.8 loaded
ndiswrapper adding rtl8180.sys
PCI: Setting latency timer of device 02:00.0 to 64
wlan0: ndiswrapper ethernet device 00:02:72:44:64:4e using driver rtl8180.sys
wlan0: no IPv6 routers present
localhost:/home/a-double-ya #
----------------------------------------------------
nun folgt:
----------------------------------------------------
localhost:/home/a-double-ya # iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11b ESSID:""
Mode:Auto Frequency:2.412GHz Access Point: FF:FF:FF:FF:FF:FF
Bit Rate:11Mb/s Tx-Power:20 dBm Sensitivity=0/3
RTS thr:2432 B Fragment thr:2432 B
Encryption key
ff
Power Management
ff
Link Quality:100/100 Signal level:-95 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
localhost:/home/a-double-ya #
Wenn ich nun die ESSID, WEP und den Mode einstellen möchte so speichert er die Werte nicht:
----------------------------------------------
localhost:/home/a-double-ya # iwconfig wlan0 essid SMC
localhost:/home/a-double-ya # iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11b ESSID:""
Mode:Auto Frequency:2.412GHz Access Point: FF:FF:FF:FF:FF:FF
Bit Rate:11Mb/s Tx-Power:20 dBm Sensitivity=0/3
RTS thr:2432 B Fragment thr:2432 B
Encryption key
ff
Power Management
ff
Link Quality:100/100 Signal level:-95 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
localhost:/home/a-double-ya #
Nach der Eingabe der ESSID steht dort immernoch keine?!
Der WEP Key wird gespeichert, wenn ich diesen eingebe.
Was fehlt nun noch?
). funktioniert aber anscheinend nur dann, wenn man (wieder mal) die karte dort löscht und dann wieder einbindet.